1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 */ 11 12 #ifndef __CONFIG_RASTABAN_H 13 #define __CONFIG_RASTABAN_H 14 15 #include "siemens-am33x-common.h" 16 17 #define DDR_PLL_FREQ 303 18 19 /* FWD Button = 27 20 * SRV Button = 87 */ 21 #define BOARD_DFU_BUTTON_GPIO 27 22 #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ 23 /* In dfu mode keep led1 on */ 24 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ 25 "button_dfu0=27\0" \ 26 "button_dfu1=87\0" \ 27 "led0=3,0,1\0" \ 28 "led1=4,0,0\0" \ 29 "led2=5,0,1\0" \ 30 "led3=62,0,1\0" \ 31 "led4=60,0,1\0" \ 32 "led5=63,0,1\0" 33 34 /* Physical Memory Map */ 35 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ 36 37 /* I2C Configuration */ 38 #define CONFIG_SYS_I2C_SPEED 100000 39 40 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 41 #define EEPROM_ADDR_DDR3 0x90 42 #define EEPROM_ADDR_CHIP 0x120 43 44 #define CONFIG_PHY_SMSC 45 46 #define CONFIG_FACTORYSET 47 48 /* Define own nand partitions */ 49 #define CONFIG_ENV_OFFSET_REDUND 0x2E0000 50 #define CONFIG_ENV_SIZE_REDUND 0x2000 51 #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) 52 53 #ifndef CONFIG_SPL_BUILD 54 55 /* Default env settings */ 56 #define CONFIG_EXTRA_ENV_SETTINGS \ 57 "hostname=rastaban\0" \ 58 "ubi_off=2048\0"\ 59 "nand_img_size=0x400000\0" \ 60 "optargs=\0" \ 61 "preboot=draco_led 0\0" \ 62 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ 63 CONFIG_ENV_SETTINGS_V2 \ 64 CONFIG_ENV_SETTINGS_NAND_V2 65 66 #ifndef CONFIG_RESTORE_FLASH 67 /* set to negative value for no autoboot */ 68 69 #define CONFIG_BOOTCOMMAND \ 70 "if dfubutton; then " \ 71 "run dfu_start; " \ 72 "reset; " \ 73 "fi;" \ 74 "run nand_boot;" \ 75 "run nand_boot_backup;" \ 76 "reset;" 77 78 #else 79 80 #define CONFIG_BOOTCOMMAND \ 81 "setenv autoload no; " \ 82 "dhcp; " \ 83 "if tftp 80000000 debrick.scr; then " \ 84 "source 80000000; " \ 85 "fi" 86 #endif 87 #endif /* CONFIG_SPL_BUILD */ 88 #endif /* ! __CONFIG_RASTABAN_H */ 89