xref: /openbmc/u-boot/include/configs/r7780mp.h (revision 747778cf)
1 /*
2  * Configuation settings for the Renesas R7780MP board
3  *
4  * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5  * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __R7780RP_H
11 #define __R7780RP_H
12 
13 #define CONFIG_CPU_SH7780	1
14 #define CONFIG_R7780MP		1
15 #define CONFIG_SYS_R7780MP_OLD_FLASH	1
16 #define __LITTLE_ENDIAN__ 1
17 
18 #define CONFIG_DISPLAY_BOARDINFO
19 
20 /*
21  * Command line configuration.
22  */
23 #define CONFIG_CMD_SDRAM
24 #define CONFIG_CMD_PCI
25 
26 #define CONFIG_SCIF_CONSOLE	1
27 #define CONFIG_CONS_SCIF0	1
28 
29 #define CONFIG_BOOTARGS		"console=ttySC0,115200"
30 #define CONFIG_ENV_OVERWRITE	1
31 
32 #define CONFIG_SYS_TEXT_BASE		0x0FFC0000
33 #define CONFIG_SYS_SDRAM_BASE		(0x08000000)
34 #define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
35 
36 #define CONFIG_SYS_LONGHELP
37 #define CONFIG_SYS_CBSIZE		256
38 #define CONFIG_SYS_PBSIZE		256
39 #define CONFIG_SYS_MAXARGS		16
40 #define CONFIG_SYS_BARGSIZE	512
41 
42 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
43 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
44 
45 /* Flash board support */
46 #define CONFIG_SYS_FLASH_BASE		(0xA0000000)
47 #ifdef CONFIG_SYS_R7780MP_OLD_FLASH
48 /* NOR Flash (S29PL127J60TFI130) */
49 # define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
50 # define CONFIG_SYS_MAX_FLASH_BANKS	(2)
51 # define CONFIG_SYS_MAX_FLASH_SECT	270
52 # define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
53 				CONFIG_SYS_FLASH_BASE + 0x100000,\
54 				CONFIG_SYS_FLASH_BASE + 0x400000,\
55 				CONFIG_SYS_FLASH_BASE + 0x700000, }
56 #else /* CONFIG_SYS_R7780MP_OLD_FLASH */
57 /* NOR Flash (Spantion S29GL256P) */
58 # define CONFIG_SYS_MAX_FLASH_BANKS	(1)
59 # define CONFIG_SYS_MAX_FLASH_SECT		256
60 # define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
61 #endif /* CONFIG_SYS_R7780MP_OLD_FLASH */
62 
63 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
64 /* Address of u-boot image in Flash */
65 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
66 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
67 /* Size of DRAM reserved for malloc() use */
68 #define CONFIG_SYS_MALLOC_LEN		(1204 * 1024)
69 
70 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
71 #define CONFIG_SYS_RX_ETH_BUFFER	(8)
72 
73 #define CONFIG_SYS_FLASH_CFI
74 #define CONFIG_FLASH_CFI_DRIVER
75 #undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
76 #undef  CONFIG_SYS_FLASH_QUIET_TEST
77 /* print 'E' for empty sector on flinfo */
78 #define CONFIG_SYS_FLASH_EMPTY_INFO
79 
80 #define CONFIG_ENV_IS_IN_FLASH
81 #define CONFIG_ENV_SECT_SIZE	(256 * 1024)
82 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
83 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
84 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000
85 #define CONFIG_SYS_FLASH_WRITE_TOUT	500
86 
87 /* Board Clock */
88 #define CONFIG_SYS_CLK_FREQ	33333333
89 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
90 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
91 #define CONFIG_SYS_TMU_CLK_DIV		4
92 
93 /* PCI Controller */
94 #if defined(CONFIG_CMD_PCI)
95 #define CONFIG_SH4_PCI
96 #define CONFIG_SH7780_PCI
97 #define CONFIG_SH7780_PCI_LSR	0x07f00001
98 #define CONFIG_SH7780_PCI_LAR	CONFIG_SYS_SDRAM_SIZE
99 #define CONFIG_SH7780_PCI_BAR	CONFIG_SYS_SDRAM_SIZE
100 #define CONFIG_PCI_SCAN_SHOW	1
101 #define __mem_pci
102 
103 #define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
104 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
105 #define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
106 
107 #define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
108 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
109 #define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
110 #define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
111 #define CONFIG_PCI_SYS_BUS  CONFIG_SYS_SDRAM_BASE
112 #define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
113 #endif /* CONFIG_CMD_PCI */
114 
115 #if defined(CONFIG_CMD_NET)
116 /* AX88796L Support(NE2000 base chip) */
117 #define CONFIG_DRIVER_AX88796L
118 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
119 #endif
120 
121 /* Compact flash Support */
122 #if defined(CONFIG_IDE)
123 #define CONFIG_IDE_RESET        1
124 #define CONFIG_SYS_PIO_MODE            1
125 #define CONFIG_SYS_IDE_MAXBUS          1   /* IDE bus */
126 #define CONFIG_SYS_IDE_MAXDEVICE       1
127 #define CONFIG_SYS_ATA_BASE_ADDR       0xb4000000
128 #define CONFIG_SYS_ATA_STRIDE          2               /* 1bit shift */
129 #define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
130 #define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
131 #define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
132 #define CONFIG_IDE_SWAP_IO
133 #endif /* CONFIG_IDE */
134 
135 #endif /* __R7780RP_H */
136