1 /* 2 * Configuation settings for the Renesas R7780MP board 3 * 4 * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 5 * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __R7780RP_H 11 #define __R7780RP_H 12 13 #define CONFIG_CPU_SH7780 1 14 #define CONFIG_R7780MP 1 15 #define CONFIG_SYS_R7780MP_OLD_FLASH 1 16 #define __LITTLE_ENDIAN__ 1 17 18 #define CONFIG_DISPLAY_BOARDINFO 19 20 /* 21 * Command line configuration. 22 */ 23 #define CONFIG_CMD_SDRAM 24 #define CONFIG_CMD_PCI 25 #define CONFIG_CMD_IDE 26 #define CONFIG_DOS_PARTITION 27 28 #define CONFIG_SCIF_CONSOLE 1 29 #define CONFIG_BAUDRATE 115200 30 #define CONFIG_CONS_SCIF0 1 31 32 #define CONFIG_BOOTARGS "console=ttySC0,115200" 33 #define CONFIG_ENV_OVERWRITE 1 34 35 #define CONFIG_SYS_TEXT_BASE 0x0FFC0000 36 #define CONFIG_SYS_SDRAM_BASE (0x08000000) 37 #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) 38 39 #define CONFIG_SYS_LONGHELP 40 #define CONFIG_SYS_CBSIZE 256 41 #define CONFIG_SYS_PBSIZE 256 42 #define CONFIG_SYS_MAXARGS 16 43 #define CONFIG_SYS_BARGSIZE 512 44 45 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 46 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) 47 48 /* Flash board support */ 49 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 50 #ifdef CONFIG_SYS_R7780MP_OLD_FLASH 51 /* NOR Flash (S29PL127J60TFI130) */ 52 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT 53 # define CONFIG_SYS_MAX_FLASH_BANKS (2) 54 # define CONFIG_SYS_MAX_FLASH_SECT 270 55 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ 56 CONFIG_SYS_FLASH_BASE + 0x100000,\ 57 CONFIG_SYS_FLASH_BASE + 0x400000,\ 58 CONFIG_SYS_FLASH_BASE + 0x700000, } 59 #else /* CONFIG_SYS_R7780MP_OLD_FLASH */ 60 /* NOR Flash (Spantion S29GL256P) */ 61 # define CONFIG_SYS_MAX_FLASH_BANKS (1) 62 # define CONFIG_SYS_MAX_FLASH_SECT 256 63 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 64 #endif /* CONFIG_SYS_R7780MP_OLD_FLASH */ 65 66 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) 67 /* Address of u-boot image in Flash */ 68 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 69 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 70 /* Size of DRAM reserved for malloc() use */ 71 #define CONFIG_SYS_MALLOC_LEN (1204 * 1024) 72 73 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 74 #define CONFIG_SYS_RX_ETH_BUFFER (8) 75 76 #define CONFIG_SYS_FLASH_CFI 77 #define CONFIG_FLASH_CFI_DRIVER 78 #undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE 79 #undef CONFIG_SYS_FLASH_QUIET_TEST 80 /* print 'E' for empty sector on flinfo */ 81 #define CONFIG_SYS_FLASH_EMPTY_INFO 82 83 #define CONFIG_ENV_IS_IN_FLASH 84 #define CONFIG_ENV_SECT_SIZE (256 * 1024) 85 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 86 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 87 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 88 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 89 90 /* Board Clock */ 91 #define CONFIG_SYS_CLK_FREQ 33333333 92 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 93 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 94 #define CONFIG_SYS_TMU_CLK_DIV 4 95 96 /* PCI Controller */ 97 #if defined(CONFIG_CMD_PCI) 98 #define CONFIG_SH4_PCI 99 #define CONFIG_SH7780_PCI 100 #define CONFIG_SH7780_PCI_LSR 0x07f00001 101 #define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE 102 #define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE 103 #define CONFIG_PCI_SCAN_SHOW 1 104 #define __mem_pci 105 106 #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ 107 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS 108 #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ 109 110 #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ 111 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS 112 #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ 113 #define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE 114 #define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE 115 #define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE 116 #endif /* CONFIG_CMD_PCI */ 117 118 #if defined(CONFIG_CMD_NET) 119 /* AX88796L Support(NE2000 base chip) */ 120 #define CONFIG_DRIVER_AX88796L 121 #define CONFIG_DRIVER_NE2000_BASE 0xA4100000 122 #endif 123 124 /* Compact flash Support */ 125 #if defined(CONFIG_CMD_IDE) 126 #define CONFIG_IDE_RESET 1 127 #define CONFIG_SYS_PIO_MODE 1 128 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ 129 #define CONFIG_SYS_IDE_MAXDEVICE 1 130 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 131 #define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ 132 #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ 133 #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ 134 #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ 135 #define CONFIG_IDE_SWAP_IO 136 #endif /* CONFIG_CMD_IDE */ 137 138 #endif /* __R7780RP_H */ 139