1 #ifndef __CONFIG_H 2 #define __CONFIG_H 3 4 #undef DEBUG 5 6 #define CONFIG_SH 1 7 #define CONFIG_SH4 1 8 #define CONFIG_CPU_SH7751 1 9 #define CONFIG_CPU_SH_TYPE_R 1 10 #define CONFIG_R2DPLUS 1 11 #define __LITTLE_ENDIAN__ 1 12 13 /* 14 * Command line configuration. 15 */ 16 #include <config_cmd_default.h> 17 18 #define CONFIG_CMD_CACHE 19 #define CONFIG_CMD_FLASH 20 #define CONFIG_CMD_PCI 21 #define CONFIG_CMD_NET 22 #define CONFIG_CMD_PING 23 #define CONFIG_CMD_IDE 24 #define CONFIG_CMD_EXT2 25 #define CONFIG_DOS_PARTITION 26 #define CONFIG_CMD_SH_ZIMAGEBOOT 27 28 /* SCIF */ 29 #define CONFIG_SCIF_CONSOLE 1 30 #define CONFIG_BAUDRATE 115200 31 #define CONFIG_CONS_SCIF1 1 32 #define CONFIG_BOARD_LATE_INIT 33 34 #define CONFIG_BOOTDELAY -1 35 #define CONFIG_BOOTARGS "console=ttySC0,115200" 36 #define CONFIG_ENV_OVERWRITE 1 37 38 /* SDRAM */ 39 #define CONFIG_SYS_SDRAM_BASE (0x8C000000) 40 #define CONFIG_SYS_SDRAM_SIZE (0x04000000) 41 42 #define CONFIG_SYS_TEXT_BASE 0x0FFC0000 43 #define CONFIG_SYS_LONGHELP 44 #define CONFIG_SYS_PROMPT "=> " 45 #define CONFIG_SYS_CBSIZE 256 46 #define CONFIG_SYS_PBSIZE 256 47 #define CONFIG_SYS_MAXARGS 16 48 #define CONFIG_SYS_BARGSIZE 512 49 /* List of legal baudrate settings for this board */ 50 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } 51 52 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 53 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) 54 55 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) 56 /* Address of u-boot image in Flash */ 57 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 58 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 59 /* Size of DRAM reserved for malloc() use */ 60 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 61 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 62 63 /* 64 * NOR Flash ( Spantion S29GL256P ) 65 */ 66 #define CONFIG_SYS_FLASH_CFI 67 #define CONFIG_FLASH_CFI_DRIVER 68 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 69 #define CONFIG_SYS_MAX_FLASH_BANKS (1) 70 #define CONFIG_SYS_MAX_FLASH_SECT 256 71 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 72 73 #define CONFIG_ENV_IS_IN_FLASH 74 #define CONFIG_ENV_SECT_SIZE 0x40000 75 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 76 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 77 78 /* 79 * SuperH Clock setting 80 */ 81 #define CONFIG_SYS_CLK_FREQ 60000000 82 #define CONFIG_SYS_TMU_CLK_DIV 4 83 #define CONFIG_SYS_HZ 1000 84 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ 85 86 /* 87 * IDE support 88 */ 89 #define CONFIG_IDE_RESET 1 90 #define CONFIG_SYS_PIO_MODE 1 91 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ 92 #define CONFIG_SYS_IDE_MAXDEVICE 1 93 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 94 #define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ 95 #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ 96 #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ 97 #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ 98 #define CONFIG_IDE_SWAP_IO 99 100 /* 101 * SuperH PCI Bridge Configration 102 */ 103 #define CONFIG_PCI 104 #define CONFIG_SH4_PCI 105 #define CONFIG_SH7751_PCI 106 #define CONFIG_PCI_PNP 107 #define CONFIG_PCI_SCAN_SHOW 1 108 #define __io 109 #define __mem_pci 110 111 #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ 112 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS 113 #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ 114 #define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ 115 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS 116 #define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ 117 #define CONFIG_PCI_SYS_BUS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) 118 #define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff) 119 #define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE 120 121 /* 122 * Network device (RTL8139) support 123 */ 124 #define CONFIG_RTL8139 125 126 #endif /* __CONFIG_H */ 127