1 #ifndef __CONFIG_H 2 #define __CONFIG_H 3 4 #undef DEBUG 5 6 #define CONFIG_SH 1 7 #define CONFIG_SH4 1 8 #define CONFIG_CPU_SH7751 1 9 #define CONFIG_CPU_SH_TYPE_R 1 10 #define CONFIG_R2DPLUS 1 11 #define __LITTLE_ENDIAN__ 1 12 13 /* 14 * Command line configuration. 15 */ 16 #include <config_cmd_default.h> 17 18 #define CONFIG_CMD_DFL 19 #define CONFIG_CMD_CACHE 20 #define CONFIG_CMD_FLASH 21 #define CONFIG_CMD_PCI 22 #define CONFIG_CMD_NET 23 #define CONFIG_CMD_PING 24 #define CONFIG_CMD_IDE 25 #define CONFIG_CMD_EXT2 26 #define CONFIG_DOS_PARTITION 27 28 /* SCIF */ 29 #define CONFIG_SCIF_CONSOLE 1 30 #define CONFIG_BAUDRATE 115200 31 #define CONFIG_CONS_SCIF1 1 32 #define BOARD_LATE_INIT 1 33 34 #define CONFIG_BOOTDELAY -1 35 #define CONFIG_BOOTARGS "console=ttySC0,115200" 36 #define CONFIG_ENV_OVERWRITE 1 37 38 /* SDRAM */ 39 #define CFG_SDRAM_BASE (0x8C000000) 40 #define CFG_SDRAM_SIZE (0x04000000) 41 42 #define CFG_LONGHELP 43 #define CFG_PROMPT "=> " 44 #define CFG_CBSIZE 256 45 #define CFG_PBSIZE 256 46 #define CFG_MAXARGS 16 47 #define CFG_BARGSIZE 512 48 /* List of legal baudrate settings for this board */ 49 #define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } 50 51 #define CFG_MEMTEST_START (CFG_SDRAM_BASE) 52 #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) 53 54 #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) 55 /* Address of u-boot image in Flash */ 56 #define CFG_MONITOR_BASE (CFG_FLASH_BASE) 57 #define CFG_MONITOR_LEN (256 * 1024) 58 /* Size of DRAM reserved for malloc() use */ 59 #define CFG_MALLOC_LEN (1024 * 1024) 60 /* size in bytes reserved for initial data */ 61 #define CFG_GBL_DATA_SIZE (256) 62 #define CFG_BOOTMAPSZ (8 * 1024 * 1024) 63 64 /* 65 * NOR Flash ( Spantion S29GL256P ) 66 */ 67 #define CFG_FLASH_CFI 68 #define CONFIG_FLASH_CFI_DRIVER 69 #define CFG_FLASH_BASE (0xA0000000) 70 #define CFG_MAX_FLASH_BANKS (1) 71 #define CFG_MAX_FLASH_SECT 256 72 #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } 73 74 #define CONFIG_ENV_IS_IN_FLASH 75 #define CONFIG_ENV_SECT_SIZE 0x40000 76 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 77 #define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) 78 79 /* 80 * SuperH Clock setting 81 */ 82 #define CONFIG_SYS_CLK_FREQ 60000000 83 #define TMU_CLK_DIVIDER 4 84 #define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) 85 #define CFG_PLL_SETTLING_TIME 100/* in us */ 86 87 /* 88 * IDE support 89 */ 90 #define CONFIG_IDE_RESET 1 91 #define CFG_PIO_MODE 1 92 #define CFG_IDE_MAXBUS 1 /* IDE bus */ 93 #define CFG_IDE_MAXDEVICE 1 94 #define CFG_ATA_BASE_ADDR 0xb4000000 95 #define CFG_ATA_STRIDE 2 /* 1bit shift */ 96 #define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ 97 #define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ 98 #define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ 99 100 /* 101 * SuperH PCI Bridge Configration 102 */ 103 #define CONFIG_PCI 104 #define CONFIG_SH4_PCI 105 #define CONFIG_SH7751_PCI 106 #define CONFIG_PCI_PNP 107 #define CONFIG_PCI_SCAN_SHOW 1 108 #define __io 109 #define __mem_pci 110 111 #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ 112 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS 113 #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ 114 #define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ 115 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS 116 #define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ 117 118 /* 119 * Network device (RTL8139) support 120 */ 121 #define CONFIG_NET_MULTI 122 #define CONFIG_RTL8139 123 #define _IO_BASE 0x00000000 124 #define KSEG1ADDR(x) (x) 125 126 #endif /* __CONFIG_H */ 127