xref: /openbmc/u-boot/include/configs/r2dplus.h (revision 0dfe3ffe)
1 #ifndef __CONFIG_H
2 #define __CONFIG_H
3 
4 #define CONFIG_CPU_SH7751	1
5 #define CONFIG_CPU_SH_TYPE_R	1
6 #define CONFIG_R2DPLUS		1
7 #define __LITTLE_ENDIAN__	1
8 
9 #define CONFIG_DISPLAY_BOARDINFO
10 
11 /*
12  * Command line configuration.
13  */
14 #define CONFIG_CMD_PCI
15 #define CONFIG_CMD_SH_ZIMAGEBOOT
16 
17 /* SCIF */
18 #define CONFIG_CONS_SCIF1	1
19 
20 #define CONFIG_BOOTARGS		"console=ttySC0,115200"
21 #define CONFIG_ENV_OVERWRITE	1
22 
23 /* SDRAM */
24 #define CONFIG_SYS_SDRAM_BASE		0x8C000000
25 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
26 
27 #define CONFIG_SYS_TEXT_BASE		0x8FE00000
28 #define CONFIG_SYS_LONGHELP
29 #define CONFIG_SYS_CBSIZE		256
30 #define CONFIG_SYS_PBSIZE		256
31 #define CONFIG_SYS_MAXARGS		16
32 #define CONFIG_SYS_BARGSIZE		512
33 
34 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
35 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
36 
37 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
38 /* Address of u-boot image in Flash */
39 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
40 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
41 /* Size of DRAM reserved for malloc() use */
42 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
43 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
44 
45 /*
46  * NOR Flash ( Spantion S29GL256P )
47  */
48 #define CONFIG_SYS_FLASH_CFI
49 #define CONFIG_FLASH_CFI_DRIVER
50 #define CONFIG_SYS_FLASH_BASE		(0xA0000000)
51 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
52 #define CONFIG_SYS_MAX_FLASH_SECT  256
53 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
54 
55 #define CONFIG_ENV_SECT_SIZE	0x40000
56 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
57 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
58 
59 /*
60  * SuperH Clock setting
61  */
62 #define CONFIG_SYS_CLK_FREQ	60000000
63 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
64 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
65 #define CONFIG_SYS_TMU_CLK_DIV		4
66 #define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
67 
68 /*
69  * IDE support
70  */
71 #define CONFIG_IDE_RESET	1
72 #define CONFIG_SYS_PIO_MODE		1
73 #define CONFIG_SYS_IDE_MAXBUS		1 /* IDE bus */
74 #define CONFIG_SYS_IDE_MAXDEVICE	1
75 #define CONFIG_SYS_ATA_BASE_ADDR	0xb4000000
76 #define CONFIG_SYS_ATA_STRIDE		2 /* 1bit shift */
77 #define CONFIG_SYS_ATA_DATA_OFFSET	0x1000	/* data reg offset */
78 #define CONFIG_SYS_ATA_REG_OFFSET	0x1000	/* reg offset */
79 #define CONFIG_SYS_ATA_ALT_OFFSET	0x800	/* alternate register offset */
80 #define CONFIG_IDE_SWAP_IO
81 
82 /*
83  * SuperH PCI Bridge Configration
84  */
85 #define CONFIG_SH4_PCI
86 #define CONFIG_SH7751_PCI
87 #define CONFIG_PCI_SCAN_SHOW	1
88 #define __mem_pci
89 
90 #define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
91 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
92 #define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
93 #define CONFIG_PCI_IO_BUS	0xFE240000	/* IO space base address */
94 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
95 #define CONFIG_PCI_IO_SIZE	0x00040000	/* Size of IO window */
96 #define CONFIG_PCI_SYS_BUS	CONFIG_SYS_SDRAM_BASE
97 #define CONFIG_PCI_SYS_PHYS	CONFIG_SYS_SDRAM_BASE
98 #define CONFIG_PCI_SYS_SIZE	CONFIG_SYS_SDRAM_SIZE
99 
100 #endif /* __CONFIG_H */
101