1 /* 2 * Configuation settings for the Renesas Solutions r0p7734 board 3 * 4 * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __R0P7734_H 10 #define __R0P7734_H 11 12 #define CONFIG_CPU_SH7734 1 13 #define CONFIG_R0P7734 1 14 #define CONFIG_400MHZ_MODE 1 15 /* #define CONFIG_533MHZ_MODE 1 */ 16 17 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 18 19 #define CONFIG_CMD_SDRAM 20 #define CONFIG_CMD_ENV 21 22 #define CONFIG_BOOTARGS "console=ttySC3,115200" 23 24 #define CONFIG_DISPLAY_BOARDINFO 25 #undef CONFIG_SHOW_BOOT_PROGRESS 26 27 /* Ether */ 28 #define CONFIG_SH_ETHER 1 29 #define CONFIG_SH_ETHER_USE_PORT (0) 30 #define CONFIG_SH_ETHER_PHY_ADDR (0x0) 31 #define CONFIG_PHYLIB 32 #define CONFIG_PHY_SMSC 1 33 #define CONFIG_BITBANGMII 34 #define CONFIG_BITBANGMII_MULTI 35 #define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */ 36 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII 37 #ifndef CONFIG_SH_ETHER 38 # define CONFIG_SMC911X 39 # define CONFIG_SMC911X_16_BIT 40 # define CONFIG_SMC911X_BASE (0x84000000) 41 #endif 42 43 /* I2C */ 44 #define CONFIG_SH_SH7734_I2C 1 45 #define CONFIG_HARD_I2C 1 46 #define CONFIG_I2C_MULTI_BUS 1 47 #define CONFIG_SYS_MAX_I2C_BUS 2 48 #define CONFIG_SYS_I2C_MODULE 0 49 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ 50 #define CONFIG_SYS_I2C_SLAVE 0x50 51 #define CONFIG_SH_I2C_DATA_HIGH 4 52 #define CONFIG_SH_I2C_DATA_LOW 5 53 #define CONFIG_SH_I2C_CLOCK 500000000 54 #define CONFIG_SH_I2C_BASE0 0xFFC70000 55 #define CONFIG_SH_I2C_BASE1 0xFFC7100 56 57 /* undef to save memory */ 58 #define CONFIG_SYS_LONGHELP 59 /* Monitor Command Prompt */ 60 /* Buffer size for input from the Console */ 61 #define CONFIG_SYS_CBSIZE 256 62 /* Buffer size for Console output */ 63 #define CONFIG_SYS_PBSIZE 256 64 /* max args accepted for monitor commands */ 65 #define CONFIG_SYS_MAXARGS 16 66 /* Buffer size for Boot Arguments passed to kernel */ 67 #define CONFIG_SYS_BARGSIZE 512 68 /* List of legal baudrate settings for this board */ 69 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } 70 71 /* SCIF */ 72 #define CONFIG_SCIF_CONSOLE 1 73 #define CONFIG_SCIF 1 74 #define CONFIG_CONS_SCIF3 1 75 76 /* Suppress display of console information at boot */ 77 78 /* SDRAM */ 79 #define CONFIG_SYS_SDRAM_BASE (0x88000000) 80 #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) 81 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) 82 83 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 84 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024) 85 /* Enable alternate, more extensive, memory test */ 86 #undef CONFIG_SYS_ALT_MEMTEST 87 /* Scratch address used by the alternate memory test */ 88 #undef CONFIG_SYS_MEMTEST_SCRATCH 89 90 /* Enable temporary baudrate change while serial download */ 91 #undef CONFIG_SYS_LOADS_BAUD_CHANGE 92 93 /* FLASH */ 94 #define CONFIG_FLASH_CFI_DRIVER 1 95 #define CONFIG_SYS_FLASH_CFI 96 #undef CONFIG_SYS_FLASH_QUIET_TEST 97 #define CONFIG_SYS_FLASH_EMPTY_INFO 98 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 99 #define CONFIG_SYS_MAX_FLASH_SECT 512 100 101 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */ 102 #define CONFIG_SYS_MAX_FLASH_BANKS 1 103 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 104 105 /* Timeout for Flash erase operations (in ms) */ 106 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 107 /* Timeout for Flash write operations (in ms) */ 108 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 109 /* Timeout for Flash set sector lock bit operations (in ms) */ 110 #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 111 /* Timeout for Flash clear lock bit operations (in ms) */ 112 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 113 114 /* 115 * Use hardware flash sectors protection instead 116 * of U-Boot software protection 117 */ 118 #undef CONFIG_SYS_FLASH_PROTECTION 119 #undef CONFIG_SYS_DIRECT_FLASH_TFTP 120 121 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ 122 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 123 /* Monitor size */ 124 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 125 /* Size of DRAM reserved for malloc() use */ 126 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) 127 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 128 129 /* ENV setting */ 130 #define CONFIG_ENV_IS_IN_FLASH 131 #define CONFIG_ENV_OVERWRITE 1 132 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 133 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 134 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 135 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 136 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 137 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 138 139 /* Board Clock */ 140 #if defined(CONFIG_400MHZ_MODE) 141 #define CONFIG_SYS_CLK_FREQ 50000000 142 #else 143 #define CONFIG_SYS_CLK_FREQ 44444444 144 #endif 145 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 146 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 147 #define CONFIG_SYS_TMU_CLK_DIV 4 148 149 #endif /* __R0P7734_H */ 150