1 /* 2 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * board/config.h - configuration options, board specific 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <configs/x86-common.h> 15 16 #define CONFIG_SYS_MONITOR_LEN (1 << 20) 17 #define CONFIG_ARCH_MISC_INIT 18 19 #define CONFIG_PCI_MEM_BUS 0xc0000000 20 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS 21 #define CONFIG_PCI_MEM_SIZE 0x10000000 22 23 #define CONFIG_PCI_PREF_BUS 0xd0000000 24 #define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS 25 #define CONFIG_PCI_PREF_SIZE 0x10000000 26 27 #define CONFIG_PCI_IO_BUS 0x2000 28 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS 29 #define CONFIG_PCI_IO_SIZE 0xe000 30 31 #define CONFIG_PCI_PNP 32 33 #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,vga\0" \ 34 "stdout=serial,vga\0" \ 35 "stderr=serial,vga\0" 36 37 /* 38 * ATA/SATA support for QEMU x86 targets 39 * - Only legacy IDE controller is supported for QEMU '-M pc' target 40 * - AHCI controller is supported for QEMU '-M q35' target 41 * 42 * Default configuraion is to support the QEMU default x86 target 43 * Undefine CONFIG_CMD_IDE to support q35 target 44 */ 45 #define CONFIG_CMD_IDE 46 #ifdef CONFIG_CMD_IDE 47 #define CONFIG_SYS_IDE_MAXBUS 2 48 #define CONFIG_SYS_IDE_MAXDEVICE 4 49 #define CONFIG_SYS_ATA_BASE_ADDR 0 50 #define CONFIG_SYS_ATA_DATA_OFFSET 0 51 #define CONFIG_SYS_ATA_REG_OFFSET 0 52 #define CONFIG_SYS_ATA_ALT_OFFSET 0 53 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 54 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 55 #define CONFIG_ATAPI 56 57 #undef CONFIG_SCSI_AHCI 58 #undef CONFIG_CMD_SCSI 59 #else 60 #define CONFIG_SCSI_DEV_LIST \ 61 {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI} 62 #endif 63 64 /* GPIO is not supported */ 65 #undef CONFIG_INTEL_ICH6_GPIO 66 #undef CONFIG_CMD_GPIO 67 68 /* SPI is not supported */ 69 #undef CONFIG_ICH_SPI 70 #undef CONFIG_ENV_IS_IN_SPI_FLASH 71 #define CONFIG_ENV_IS_NOWHERE 72 73 #endif /* __CONFIG_H */ 74