xref: /openbmc/u-boot/include/configs/qemu-x86.h (revision 2aa3a7fb)
1a65b25d1SBin Meng /*
2a65b25d1SBin Meng  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3a65b25d1SBin Meng  *
4a65b25d1SBin Meng  * SPDX-License-Identifier:	GPL-2.0+
5a65b25d1SBin Meng  */
6a65b25d1SBin Meng 
7a65b25d1SBin Meng /*
8a65b25d1SBin Meng  * board/config.h - configuration options, board specific
9a65b25d1SBin Meng  */
10a65b25d1SBin Meng 
11a65b25d1SBin Meng #ifndef __CONFIG_H
12a65b25d1SBin Meng #define __CONFIG_H
13a65b25d1SBin Meng 
14a65b25d1SBin Meng #include <configs/x86-common.h>
15a65b25d1SBin Meng 
16a65b25d1SBin Meng #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
17a65b25d1SBin Meng 
18a65b25d1SBin Meng #define CONFIG_X86_SERIAL
19a65b25d1SBin Meng 
20a65b25d1SBin Meng #define CONFIG_PCI_MEM_BUS		0xc0000000
21a65b25d1SBin Meng #define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
22a65b25d1SBin Meng #define CONFIG_PCI_MEM_SIZE		0x10000000
23a65b25d1SBin Meng 
24a65b25d1SBin Meng #define CONFIG_PCI_PREF_BUS		0xd0000000
25a65b25d1SBin Meng #define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
26a65b25d1SBin Meng #define CONFIG_PCI_PREF_SIZE		0x10000000
27a65b25d1SBin Meng 
28a65b25d1SBin Meng #define CONFIG_PCI_IO_BUS		0x2000
29a65b25d1SBin Meng #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
30a65b25d1SBin Meng #define CONFIG_PCI_IO_SIZE		0xe000
31a65b25d1SBin Meng 
32a65b25d1SBin Meng #define CONFIG_PCI_PNP
33a65b25d1SBin Meng #define CONFIG_E1000
34a65b25d1SBin Meng 
359c4f5412SBin Meng #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,vga\0" \
369c4f5412SBin Meng 					"stdout=serial,vga\0" \
379c4f5412SBin Meng 					"stderr=serial,vga\0"
38a65b25d1SBin Meng 
39*2aa3a7fbSBin Meng /*
40*2aa3a7fbSBin Meng  * ATA/SATA support for QEMU x86 targets
41*2aa3a7fbSBin Meng  *   - Only legacy IDE controller is supported for QEMU '-M pc' target
42*2aa3a7fbSBin Meng  *   - AHCI controller is supported for QEMU '-M q35' target
43*2aa3a7fbSBin Meng  *
44*2aa3a7fbSBin Meng  * Default configuraion is to support the QEMU default x86 target
45*2aa3a7fbSBin Meng  * Undefine CONFIG_CMD_IDE to support q35 target
46*2aa3a7fbSBin Meng  */
47*2aa3a7fbSBin Meng #define CONFIG_CMD_IDE
48*2aa3a7fbSBin Meng #ifdef CONFIG_CMD_IDE
49*2aa3a7fbSBin Meng #define CONFIG_SYS_IDE_MAXBUS		2
50*2aa3a7fbSBin Meng #define CONFIG_SYS_IDE_MAXDEVICE	4
51*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_BASE_ADDR	0
52*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_DATA_OFFSET	0
53*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_REG_OFFSET	0
54*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_ALT_OFFSET	0
55*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
56*2aa3a7fbSBin Meng #define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
57*2aa3a7fbSBin Meng #define CONFIG_ATAPI
58*2aa3a7fbSBin Meng 
59*2aa3a7fbSBin Meng #undef CONFIG_SCSI_AHCI
60*2aa3a7fbSBin Meng #undef CONFIG_CMD_SCSI
61*2aa3a7fbSBin Meng #else
62a65b25d1SBin Meng #define CONFIG_SCSI_DEV_LIST		\
63*2aa3a7fbSBin Meng 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
64*2aa3a7fbSBin Meng #endif
65a65b25d1SBin Meng 
66a65b25d1SBin Meng /* GPIO is not supported */
67a65b25d1SBin Meng #undef CONFIG_INTEL_ICH6_GPIO
68a65b25d1SBin Meng #undef CONFIG_CMD_GPIO
69a65b25d1SBin Meng 
70a65b25d1SBin Meng /* SPI is not supported */
71a65b25d1SBin Meng #undef CONFIG_ICH_SPI
72a65b25d1SBin Meng #undef CONFIG_ENV_IS_IN_SPI_FLASH
73a65b25d1SBin Meng #define CONFIG_ENV_IS_NOWHERE
74a65b25d1SBin Meng 
75a65b25d1SBin Meng #endif	/* __CONFIG_H */
76