1 /* 2 * Copyright 2011-2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Corenet DS style board configuration file 9 */ 10 #ifndef __QEMU_PPCE500_H 11 #define __QEMU_PPCE500_H 12 13 #define CONFIG_CMD_REGINFO 14 15 /* High Level Configuration Options */ 16 #define CONFIG_BOOKE 17 #define CONFIG_E500 /* BOOKE e500 family */ 18 #define CONFIG_QEMU_E500 19 20 #undef CONFIG_SYS_TEXT_BASE 21 #define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */ 22 #define CONFIG_SYS_GENERIC_BOARD 23 24 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 25 26 #define CONFIG_SYS_RAMBOOT 27 28 #define CONFIG_PCI /* Enable PCI/PCIE */ 29 #define CONFIG_PCI1 1 /* PCI controller 1 */ 30 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 31 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 32 33 #define CONFIG_ENV_OVERWRITE 34 35 #define CONFIG_ENABLE_36BIT_PHYS 36 37 #define CONFIG_ADDR_MAP 38 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 39 40 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 41 #define CONFIG_SYS_MEMTEST_END 0x00400000 42 #define CONFIG_SYS_ALT_MEMTEST 43 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 44 45 /* Needed to fill the ccsrbar pointer */ 46 #define CONFIG_BOARD_EARLY_INIT_F 47 48 /* Virtual address to CCSRBAR */ 49 #define CONFIG_SYS_CCSRBAR 0xe0000000 50 /* Physical address should be a function call */ 51 #ifndef __ASSEMBLY__ 52 extern unsigned long long get_phys_ccsrbar_addr_early(void); 53 #endif 54 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 55 56 /* Virtual address range for PCI region maps */ 57 #define CONFIG_SYS_PCI_MAP_START 0x80000000 58 #define CONFIG_SYS_PCI_MAP_END 0xe8000000 59 60 /* Virtual address to a temporary map if we need it (max 128MB) */ 61 #define CONFIG_SYS_TMPVIRT 0xe8000000 62 63 /* 64 * DDR Setup 65 */ 66 #define CONFIG_VERY_BIG_RAM 67 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 68 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 69 70 #define CONFIG_CHIP_SELECTS_PER_CTRL 0 71 72 #define CONFIG_SYS_CLK_FREQ 33000000 73 74 #define CONFIG_SYS_NO_FLASH 75 76 #define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ 77 78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 79 80 #define CONFIG_ENV_IS_NOWHERE 81 82 #define CONFIG_HWCONFIG 83 84 #define CONFIG_SYS_INIT_RAM_ADDR 0x00100000 85 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0 86 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000 87 /* The assembler doesn't like typecast */ 88 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 89 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 90 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 91 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 92 93 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 94 GENERATED_GBL_DATA_SIZE) 95 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 96 97 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 98 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 99 100 #define CONFIG_CONS_INDEX 1 101 #define CONFIG_SYS_NS16550 102 #define CONFIG_SYS_NS16550_SERIAL 103 #define CONFIG_SYS_NS16550_REG_SIZE 1 104 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) 105 106 #define CONFIG_SYS_BAUDRATE_TABLE \ 107 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 108 109 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 110 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 111 112 /* Use the HUSH parser */ 113 #define CONFIG_SYS_HUSH_PARSER 114 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 115 116 /* pass open firmware flat tree */ 117 #define CONFIG_OF_LIBFDT 118 #define CONFIG_OF_BOARD_SETUP 119 #define CONFIG_OF_STDOUT_VIA_ALIAS 120 121 /* new uImage format support */ 122 #define CONFIG_FIT 123 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 124 125 /* 126 * General PCI 127 * Memory space is mapped 1-1, but I/O space must start from 0. 128 */ 129 130 #ifdef CONFIG_PCI 131 #define CONFIG_PCI_INDIRECT_BRIDGE 132 #define CONFIG_NET_MULTI 133 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 134 #define CONFIG_E1000 135 136 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 137 #define CONFIG_DOS_PARTITION 138 #endif /* CONFIG_PCI */ 139 140 #define CONFIG_LBA48 141 #define CONFIG_DOS_PARTITION 142 #define CONFIG_CMD_EXT2 143 144 /* 145 * Environment 146 */ 147 #define CONFIG_ENV_SIZE 0x2000 148 149 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 150 151 #define CONFIG_LAST_STAGE_INIT 152 153 /* 154 * Command line configuration. 155 */ 156 #include <config_cmd_default.h> 157 158 #define CONFIG_CMD_DHCP 159 #define CONFIG_CMD_ELF 160 #define CONFIG_CMD_BOOTZ 161 #define CONFIG_CMD_GREPENV 162 #define CONFIG_CMD_IRQ 163 #define CONFIG_CMD_PING 164 #define CONFIG_CMD_SETEXPR 165 166 #ifdef CONFIG_PCI 167 #define CONFIG_CMD_PCI 168 #define CONFIG_CMD_NET 169 #endif 170 171 /* 172 * Miscellaneous configurable options 173 */ 174 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 175 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 176 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 177 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 178 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 179 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 180 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 181 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 182 183 /* 184 * For booting Linux, the board info and command line data 185 * have to be in the first 64 MB of memory, since this is 186 * the maximum mapped by the Linux kernel during initialization. 187 */ 188 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 189 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 190 191 /* 192 * Environment Configuration 193 */ 194 #define CONFIG_ROOTPATH "/opt/nfsroot" 195 #define CONFIG_BOOTFILE "uImage" 196 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 197 198 /* default location for tftp and bootm */ 199 #define CONFIG_LOADADDR 1000000 200 201 #define CONFIG_BAUDRATE 115200 202 203 #define CONFIG_BOOTDELAY 1 204 #define CONFIG_BOOTCOMMAND \ 205 "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0" 206 207 #endif /* __QEMU_PPCE500_H */ 208