1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * This file contains the configuration parameters for qemu-mips64 target. 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_QEMU_MIPS 16 17 #define CONFIG_DISPLAY_BOARDINFO 18 #define CONFIG_MISC_INIT_R 19 20 #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ 21 22 #define CONFIG_BAUDRATE 115200 23 24 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 25 #undef CONFIG_BOOTARGS 26 27 #define CONFIG_EXTRA_ENV_SETTINGS \ 28 "addmisc=setenv bootargs ${bootargs} " \ 29 "console=ttyS0,${baudrate} " \ 30 "panic=1\0" \ 31 "bootfile=/tftpboot/vmlinux\0" \ 32 "load=tftp ffffffff80500000 ${u-boot}\0" \ 33 "" 34 35 #define CONFIG_BOOTCOMMAND "bootp;bootelf" 36 37 /* 38 * BOOTP options 39 */ 40 #define CONFIG_BOOTP_BOOTFILESIZE 41 #define CONFIG_BOOTP_BOOTPATH 42 #define CONFIG_BOOTP_GATEWAY 43 #define CONFIG_BOOTP_HOSTNAME 44 45 /* 46 * Command line configuration. 47 */ 48 49 #define CONFIG_DRIVER_NE2000 50 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 51 52 #define CONFIG_SYS_NS16550_SERIAL 53 #define CONFIG_SYS_NS16550_REG_SIZE 1 54 #define CONFIG_SYS_NS16550_CLK 115200 55 #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 56 #define CONFIG_CONS_INDEX 1 57 58 #define CONFIG_CMD_IDE 59 #define CONFIG_DOS_PARTITION 60 61 #ifdef CONFIG_SYS_BIG_ENDIAN 62 #define CONFIG_IDE_SWAP_IO 63 #endif 64 65 #define CONFIG_SYS_IDE_MAXBUS 2 66 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 67 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 68 #define CONFIG_SYS_ATA_DATA_OFFSET 0 69 #define CONFIG_SYS_ATA_REG_OFFSET 0 70 #define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 71 72 #define CONFIG_SYS_IDE_MAXDEVICE 4 73 74 /* 75 * Miscellaneous configurable options 76 */ 77 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 78 79 #define CONFIG_AUTO_COMPLETE 80 #define CONFIG_CMDLINE_EDITING 81 82 /* Console I/O Buffer Size */ 83 #define CONFIG_SYS_CBSIZE 256 84 /* Print Buffer Size */ 85 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 86 /* max number of command args */ 87 #define CONFIG_SYS_MAXARGS 16 88 89 #define CONFIG_SYS_MALLOC_LEN 128*1024 90 91 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 92 93 #define CONFIG_SYS_MHZ 132 94 95 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) 96 97 /* Cached addr */ 98 #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 99 100 /* default load address */ 101 #define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 102 103 #define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 104 #define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 105 106 /*----------------------------------------------------------------------- 107 * FLASH and environment organization 108 */ 109 /* The following #defines are needed to get flash environment right */ 110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 111 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 112 113 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 114 115 /* We boot from this flash, selected with dip switch */ 116 #define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 117 #define CONFIG_SYS_MAX_FLASH_BANKS 1 118 #define CONFIG_SYS_MAX_FLASH_SECT 128 119 #define CONFIG_SYS_FLASH_CFI 120 #define CONFIG_FLASH_CFI_DRIVER 121 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 122 123 #define CONFIG_ENV_IS_IN_FLASH 124 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 125 126 /* Address and size of Primary Environment Sector */ 127 #define CONFIG_ENV_SIZE 0x8000 128 129 #define CONFIG_ENV_OVERWRITE 1 130 131 #define MEM_SIZE 128 132 133 #define CONFIG_LZMA 134 135 #endif /* __CONFIG_H */ 136