1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * This file contains the configuration parameters for qemu-mips64 target. 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_QEMU_MIPS 16 17 #define CONFIG_DISPLAY_BOARDINFO 18 #define CONFIG_MISC_INIT_R 19 20 #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ 21 22 #define CONFIG_BAUDRATE 115200 23 24 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 25 #undef CONFIG_BOOTARGS 26 27 #define CONFIG_EXTRA_ENV_SETTINGS \ 28 "addmisc=setenv bootargs ${bootargs} " \ 29 "console=ttyS0,${baudrate} " \ 30 "panic=1\0" \ 31 "bootfile=/tftpboot/vmlinux\0" \ 32 "load=tftp ffffffff80500000 ${u-boot}\0" \ 33 "" 34 35 #define CONFIG_BOOTCOMMAND "bootp;bootelf" 36 37 /* 38 * BOOTP options 39 */ 40 #define CONFIG_BOOTP_BOOTFILESIZE 41 #define CONFIG_BOOTP_BOOTPATH 42 #define CONFIG_BOOTP_GATEWAY 43 #define CONFIG_BOOTP_HOSTNAME 44 45 /* 46 * Command line configuration. 47 */ 48 #define CONFIG_CMD_FAT 49 #define CONFIG_CMD_EXT2 50 51 #define CONFIG_DRIVER_NE2000 52 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 53 54 #define CONFIG_SYS_NS16550_SERIAL 55 #define CONFIG_SYS_NS16550_REG_SIZE 1 56 #define CONFIG_SYS_NS16550_CLK 115200 57 #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 58 #define CONFIG_CONS_INDEX 1 59 60 #define CONFIG_CMD_IDE 61 #define CONFIG_DOS_PARTITION 62 63 #define CONFIG_SYS_IDE_MAXBUS 2 64 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 65 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 66 #define CONFIG_SYS_ATA_DATA_OFFSET 0 67 #define CONFIG_SYS_ATA_REG_OFFSET 0 68 #define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 69 70 #define CONFIG_SYS_IDE_MAXDEVICE 4 71 72 73 /* 74 * Miscellaneous configurable options 75 */ 76 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 77 78 #define CONFIG_AUTO_COMPLETE 79 #define CONFIG_CMDLINE_EDITING 80 81 /* Console I/O Buffer Size */ 82 #define CONFIG_SYS_CBSIZE 256 83 /* Print Buffer Size */ 84 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 85 /* max number of command args */ 86 #define CONFIG_SYS_MAXARGS 16 87 88 #define CONFIG_SYS_MALLOC_LEN 128*1024 89 90 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 91 92 #define CONFIG_SYS_MHZ 132 93 94 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) 95 96 /* Cached addr */ 97 #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 98 99 /* default load address */ 100 #define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 101 102 #define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 103 #define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 104 105 /*----------------------------------------------------------------------- 106 * FLASH and environment organization 107 */ 108 /* The following #defines are needed to get flash environment right */ 109 #define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */ 110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 111 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 112 113 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 114 115 /* We boot from this flash, selected with dip switch */ 116 #define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 117 #define CONFIG_SYS_MAX_FLASH_BANKS 1 118 #define CONFIG_SYS_MAX_FLASH_SECT 128 119 #define CONFIG_SYS_FLASH_CFI 120 #define CONFIG_FLASH_CFI_DRIVER 121 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 122 123 #define CONFIG_ENV_IS_IN_FLASH 124 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 125 126 /* Address and size of Primary Environment Sector */ 127 #define CONFIG_ENV_SIZE 0x8000 128 129 #define CONFIG_ENV_OVERWRITE 1 130 131 #define MEM_SIZE 128 132 133 #define CONFIG_LZMA 134 135 /*----------------------------------------------------------------------- 136 * Cache Configuration 137 */ 138 #define CONFIG_SYS_DCACHE_SIZE 16384 139 #define CONFIG_SYS_ICACHE_SIZE 16384 140 #define CONFIG_SYS_CACHELINE_SIZE 32 141 142 #endif /* __CONFIG_H */ 143