1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * This file contains the configuration parameters for qemu-mips64 target.
10  */
11 
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14 
15 #define CONFIG_QEMU_MIPS
16 
17 #define CONFIG_DISPLAY_BOARDINFO
18 #define CONFIG_MISC_INIT_R
19 
20 
21 #define CONFIG_BAUDRATE		115200
22 
23 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
24 #undef CONFIG_BOOTARGS
25 
26 #define CONFIG_EXTRA_ENV_SETTINGS					\
27 	"addmisc=setenv bootargs ${bootargs} "				\
28 		"console=ttyS0,${baudrate} "				\
29 		"panic=1\0"						\
30 	"bootfile=/tftpboot/vmlinux\0"					\
31 	"load=tftp ffffffff80500000 ${u-boot}\0"			\
32 	""
33 
34 #define CONFIG_BOOTCOMMAND	"bootp;bootelf"
35 
36 /*
37  * BOOTP options
38  */
39 #define CONFIG_BOOTP_BOOTFILESIZE
40 #define CONFIG_BOOTP_BOOTPATH
41 #define CONFIG_BOOTP_GATEWAY
42 #define CONFIG_BOOTP_HOSTNAME
43 
44 /*
45  * Command line configuration.
46  */
47 
48 #define CONFIG_DRIVER_NE2000
49 #define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300
50 
51 #define CONFIG_SYS_NS16550_SERIAL
52 #define CONFIG_SYS_NS16550_REG_SIZE	1
53 #define CONFIG_SYS_NS16550_CLK		115200
54 #define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
55 #define CONFIG_CONS_INDEX		1
56 
57 #define CONFIG_CMD_IDE
58 #define CONFIG_DOS_PARTITION
59 
60 #ifdef CONFIG_SYS_BIG_ENDIAN
61 #define CONFIG_IDE_SWAP_IO
62 #endif
63 
64 #define CONFIG_SYS_IDE_MAXBUS		2
65 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
66 #define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
67 #define CONFIG_SYS_ATA_DATA_OFFSET	0
68 #define CONFIG_SYS_ATA_REG_OFFSET	0
69 #define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000
70 
71 #define CONFIG_SYS_IDE_MAXDEVICE	4
72 
73 /*
74  * Miscellaneous configurable options
75  */
76 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
77 
78 #define CONFIG_AUTO_COMPLETE
79 #define CONFIG_CMDLINE_EDITING
80 
81 /* Console I/O Buffer Size */
82 #define CONFIG_SYS_CBSIZE		256
83 /* Print Buffer Size */
84 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
85 /* max number of command args */
86 #define CONFIG_SYS_MAXARGS		16
87 
88 #define CONFIG_SYS_MALLOC_LEN		128*1024
89 
90 #define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
91 
92 #define CONFIG_SYS_MHZ			132
93 
94 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
95 
96 /* Cached addr */
97 #define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
98 
99 /* default load address */
100 #define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000
101 
102 #define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
103 #define CONFIG_SYS_MEMTEST_END		0xffffffff80800000
104 
105 /*-----------------------------------------------------------------------
106  * FLASH and environment organization
107  */
108 /* The following #defines are needed to get flash environment right */
109 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
110 #define CONFIG_SYS_MONITOR_LEN		(192 << 10)
111 
112 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
113 
114 /* We boot from this flash, selected with dip switch */
115 #define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
116 #define CONFIG_SYS_MAX_FLASH_BANKS	1
117 #define CONFIG_SYS_MAX_FLASH_SECT	128
118 #define CONFIG_SYS_FLASH_CFI
119 #define CONFIG_FLASH_CFI_DRIVER
120 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
121 
122 #define CONFIG_ENV_IS_IN_FLASH
123 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
124 
125 /* Address and size of Primary Environment Sector */
126 #define CONFIG_ENV_SIZE		0x8000
127 
128 #define CONFIG_ENV_OVERWRITE	1
129 
130 #define MEM_SIZE		128
131 
132 #define CONFIG_LZMA
133 
134 #endif /* __CONFIG_H */
135