1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * This file contains the configuration parameters for qemu-mips64 target.
10  */
11 
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14 
15 #define CONFIG_QEMU_MIPS
16 
17 #define CONFIG_MISC_INIT_R
18 
19 
20 #define CONFIG_BAUDRATE		115200
21 
22 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
23 #undef CONFIG_BOOTARGS
24 
25 #define CONFIG_EXTRA_ENV_SETTINGS					\
26 	"addmisc=setenv bootargs ${bootargs} "				\
27 		"console=ttyS0,${baudrate} "				\
28 		"panic=1\0"						\
29 	"bootfile=/tftpboot/vmlinux\0"					\
30 	"load=tftp ffffffff80500000 ${u-boot}\0"			\
31 	""
32 
33 #define CONFIG_BOOTCOMMAND	"bootp;bootelf"
34 
35 /*
36  * BOOTP options
37  */
38 #define CONFIG_BOOTP_BOOTFILESIZE
39 #define CONFIG_BOOTP_BOOTPATH
40 #define CONFIG_BOOTP_GATEWAY
41 #define CONFIG_BOOTP_HOSTNAME
42 
43 /*
44  * Command line configuration.
45  */
46 
47 #define CONFIG_DRIVER_NE2000
48 #define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300
49 
50 #define CONFIG_SYS_NS16550_SERIAL
51 #define CONFIG_SYS_NS16550_REG_SIZE	1
52 #define CONFIG_SYS_NS16550_CLK		115200
53 #define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
54 #define CONFIG_CONS_INDEX		1
55 
56 #define CONFIG_CMD_IDE
57 
58 #ifdef CONFIG_SYS_BIG_ENDIAN
59 #define CONFIG_IDE_SWAP_IO
60 #endif
61 
62 #define CONFIG_SYS_IDE_MAXBUS		2
63 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
64 #define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
65 #define CONFIG_SYS_ATA_DATA_OFFSET	0
66 #define CONFIG_SYS_ATA_REG_OFFSET	0
67 #define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000
68 
69 #define CONFIG_SYS_IDE_MAXDEVICE	4
70 
71 /*
72  * Miscellaneous configurable options
73  */
74 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
75 
76 #define CONFIG_AUTO_COMPLETE
77 #define CONFIG_CMDLINE_EDITING
78 
79 /* Console I/O Buffer Size */
80 #define CONFIG_SYS_CBSIZE		256
81 /* Print Buffer Size */
82 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
83 /* max number of command args */
84 #define CONFIG_SYS_MAXARGS		16
85 
86 #define CONFIG_SYS_MALLOC_LEN		128*1024
87 
88 #define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
89 
90 #define CONFIG_SYS_MHZ			132
91 
92 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
93 
94 /* Cached addr */
95 #define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
96 
97 /* default load address */
98 #define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000
99 
100 #define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
101 #define CONFIG_SYS_MEMTEST_END		0xffffffff80800000
102 
103 /*-----------------------------------------------------------------------
104  * FLASH and environment organization
105  */
106 /* The following #defines are needed to get flash environment right */
107 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
108 #define CONFIG_SYS_MONITOR_LEN		(192 << 10)
109 
110 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
111 
112 /* We boot from this flash, selected with dip switch */
113 #define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
114 #define CONFIG_SYS_MAX_FLASH_BANKS	1
115 #define CONFIG_SYS_MAX_FLASH_SECT	128
116 #define CONFIG_SYS_FLASH_CFI
117 #define CONFIG_FLASH_CFI_DRIVER
118 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
119 
120 #define CONFIG_ENV_IS_IN_FLASH
121 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
122 
123 /* Address and size of Primary Environment Sector */
124 #define CONFIG_ENV_SIZE		0x8000
125 
126 #define CONFIG_ENV_OVERWRITE	1
127 
128 #define MEM_SIZE		128
129 
130 #define CONFIG_LZMA
131 
132 #endif /* __CONFIG_H */
133