1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * This file contains the configuration parameters for qemu-mips64 target. 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_QEMU_MIPS 16 17 #define CONFIG_DISPLAY_BOARDINFO 18 #define CONFIG_MISC_INIT_R 19 20 #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ 21 22 #define CONFIG_BAUDRATE 115200 23 24 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 25 #undef CONFIG_BOOTARGS 26 27 #define CONFIG_EXTRA_ENV_SETTINGS \ 28 "addmisc=setenv bootargs ${bootargs} " \ 29 "console=ttyS0,${baudrate} " \ 30 "panic=1\0" \ 31 "bootfile=/tftpboot/vmlinux\0" \ 32 "load=tftp ffffffff80500000 ${u-boot}\0" \ 33 "" 34 35 #define CONFIG_BOOTCOMMAND "bootp;bootelf" 36 37 /* 38 * BOOTP options 39 */ 40 #define CONFIG_BOOTP_BOOTFILESIZE 41 #define CONFIG_BOOTP_BOOTPATH 42 #define CONFIG_BOOTP_GATEWAY 43 #define CONFIG_BOOTP_HOSTNAME 44 45 /* 46 * Command line configuration. 47 */ 48 49 #define CONFIG_DRIVER_NE2000 50 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 51 52 #define CONFIG_SYS_NS16550_SERIAL 53 #define CONFIG_SYS_NS16550_REG_SIZE 1 54 #define CONFIG_SYS_NS16550_CLK 115200 55 #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 56 #define CONFIG_CONS_INDEX 1 57 58 #define CONFIG_CMD_IDE 59 #define CONFIG_DOS_PARTITION 60 61 #define CONFIG_SYS_IDE_MAXBUS 2 62 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 63 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 64 #define CONFIG_SYS_ATA_DATA_OFFSET 0 65 #define CONFIG_SYS_ATA_REG_OFFSET 0 66 #define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 67 68 #define CONFIG_SYS_IDE_MAXDEVICE 4 69 70 /* 71 * Miscellaneous configurable options 72 */ 73 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 74 75 #define CONFIG_AUTO_COMPLETE 76 #define CONFIG_CMDLINE_EDITING 77 78 /* Console I/O Buffer Size */ 79 #define CONFIG_SYS_CBSIZE 256 80 /* Print Buffer Size */ 81 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 82 /* max number of command args */ 83 #define CONFIG_SYS_MAXARGS 16 84 85 #define CONFIG_SYS_MALLOC_LEN 128*1024 86 87 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 88 89 #define CONFIG_SYS_MHZ 132 90 91 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) 92 93 /* Cached addr */ 94 #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 95 96 /* default load address */ 97 #define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 98 99 #define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 100 #define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 101 102 /*----------------------------------------------------------------------- 103 * FLASH and environment organization 104 */ 105 /* The following #defines are needed to get flash environment right */ 106 #define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */ 107 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 108 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 109 110 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 111 112 /* We boot from this flash, selected with dip switch */ 113 #define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 114 #define CONFIG_SYS_MAX_FLASH_BANKS 1 115 #define CONFIG_SYS_MAX_FLASH_SECT 128 116 #define CONFIG_SYS_FLASH_CFI 117 #define CONFIG_FLASH_CFI_DRIVER 118 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 119 120 #define CONFIG_ENV_IS_IN_FLASH 121 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 122 123 /* Address and size of Primary Environment Sector */ 124 #define CONFIG_ENV_SIZE 0x8000 125 126 #define CONFIG_ENV_OVERWRITE 1 127 128 #define MEM_SIZE 128 129 130 #define CONFIG_LZMA 131 132 /*----------------------------------------------------------------------- 133 * Cache Configuration 134 */ 135 #define CONFIG_SYS_DCACHE_SIZE 16384 136 #define CONFIG_SYS_ICACHE_SIZE 16384 137 #define CONFIG_SYS_CACHELINE_SIZE 32 138 139 #endif /* __CONFIG_H */ 140