1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * This file contains the configuration parameters for qemu-mips target. 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_QEMU_MIPS 16 17 #define CONFIG_DISPLAY_BOARDINFO 18 #define CONFIG_MISC_INIT_R 19 20 21 #define CONFIG_BAUDRATE 115200 22 23 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 24 #undef CONFIG_BOOTARGS 25 26 #define CONFIG_EXTRA_ENV_SETTINGS \ 27 "addmisc=setenv bootargs ${bootargs} " \ 28 "console=ttyS0,${baudrate} " \ 29 "panic=1\0" \ 30 "bootfile=/tftpboot/vmlinux\0" \ 31 "load=tftp 80500000 ${u-boot}\0" \ 32 "" 33 34 #define CONFIG_BOOTCOMMAND "bootp;bootelf" 35 36 /* 37 * BOOTP options 38 */ 39 #define CONFIG_BOOTP_BOOTFILESIZE 40 #define CONFIG_BOOTP_BOOTPATH 41 #define CONFIG_BOOTP_GATEWAY 42 #define CONFIG_BOOTP_HOSTNAME 43 44 /* 45 * Command line configuration. 46 */ 47 48 #define CONFIG_DRIVER_NE2000 49 #define CONFIG_DRIVER_NE2000_BASE 0xb4000300 50 51 #define CONFIG_SYS_NS16550_SERIAL 52 #define CONFIG_SYS_NS16550_REG_SIZE 1 53 #define CONFIG_SYS_NS16550_CLK 115200 54 #define CONFIG_SYS_NS16550_COM1 0xb40003f8 55 #define CONFIG_CONS_INDEX 1 56 57 #define CONFIG_CMD_IDE 58 #define CONFIG_DOS_PARTITION 59 60 #ifdef CONFIG_SYS_BIG_ENDIAN 61 #define CONFIG_IDE_SWAP_IO 62 #endif 63 64 #define CONFIG_SYS_IDE_MAXBUS 2 65 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 66 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 67 #define CONFIG_SYS_ATA_DATA_OFFSET 0 68 #define CONFIG_SYS_ATA_REG_OFFSET 0 69 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 70 71 #define CONFIG_SYS_IDE_MAXDEVICE 4 72 73 /* 74 * Miscellaneous configurable options 75 */ 76 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 77 78 #define CONFIG_AUTO_COMPLETE 79 #define CONFIG_CMDLINE_EDITING 80 81 /* Console I/O Buffer Size */ 82 #define CONFIG_SYS_CBSIZE 256 83 /* Print Buffer Size */ 84 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 85 /* max number of command args */ 86 #define CONFIG_SYS_MAXARGS 16 87 88 #define CONFIG_SYS_MALLOC_LEN 128*1024 89 90 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 91 92 #define CONFIG_SYS_MHZ 132 93 94 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) 95 96 /* Cached addr */ 97 #define CONFIG_SYS_SDRAM_BASE 0x80000000 98 99 /* default load address */ 100 #define CONFIG_SYS_LOAD_ADDR 0x81000000 101 102 #define CONFIG_SYS_MEMTEST_START 0x80100000 103 #define CONFIG_SYS_MEMTEST_END 0x80800000 104 105 /*----------------------------------------------------------------------- 106 * FLASH and environment organization 107 */ 108 /* The following #defines are needed to get flash environment right */ 109 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 110 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 111 112 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 113 114 /* We boot from this flash, selected with dip switch */ 115 #define CONFIG_SYS_FLASH_BASE 0xbfc00000 116 #define CONFIG_SYS_MAX_FLASH_BANKS 1 117 #define CONFIG_SYS_MAX_FLASH_SECT 128 118 #define CONFIG_SYS_FLASH_CFI 119 #define CONFIG_FLASH_CFI_DRIVER 120 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 121 122 #define CONFIG_ENV_IS_IN_FLASH 123 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 124 125 /* Address and size of Primary Environment Sector */ 126 #define CONFIG_ENV_SIZE 0x8000 127 128 #define CONFIG_ENV_OVERWRITE 1 129 130 #define MEM_SIZE 128 131 132 #define CONFIG_LZMA 133 134 #endif /* __CONFIG_H */ 135