1 /* 2 * siemens pxm2 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_PXM2_H 15 #define __CONFIG_PXM2_H 16 17 #define CONFIG_SIEMENS_PXM2 18 #define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2 19 20 #include "siemens-am33x-common.h" 21 22 #define DDR_IOCTRL_VAL 0x18b 23 #define DDR_PLL_FREQ 266 24 25 #define BOARD_DFU_BUTTON_GPIO 59 26 #define BOARD_LCD_POWER 111 27 #define BOARD_BACK_LIGHT 112 28 #define BOARD_TOUCH_POWER 57 29 30 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ 31 "button_dfu0=59\0" \ 32 "led0=117,0,1\0" \ 33 34 /* Physical Memory Map */ 35 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ 36 37 /* I2C Configuration */ 38 #define CONFIG_SYS_I2C_SPEED 400000 39 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 40 41 #define CONFIG_PHY_ATHEROS 42 43 #define CONFIG_FACTORYSET 44 45 /* Watchdog */ 46 #define CONFIG_OMAP_WATCHDOG 47 48 #ifndef CONFIG_SPL_BUILD 49 50 /* Use common default */ 51 #define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1 52 53 /* Default env settings */ 54 #define CONFIG_EXTRA_ENV_SETTINGS \ 55 "hostname=pxm2\0" \ 56 "ubi_off=2048\0"\ 57 "nand_img_size=0x500000\0" \ 58 "optargs=\0" \ 59 "preboot=draco_led 0\0" \ 60 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ 61 "splashpos=m,m\0" \ 62 CONFIG_ENV_SETTINGS_V1 \ 63 CONFIG_ENV_SETTINGS_NAND_V1 \ 64 "mmc_dev=0\0" \ 65 "mmc_root=/dev/mmcblk0p2 rw\0" \ 66 "mmc_root_fs_type=ext4 rootwait\0" \ 67 "mmc_load_uimage=" \ 68 "mmc rescan; " \ 69 "setenv bootfile uImage;" \ 70 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ 71 "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ 72 "importbootenv=echo Importing environment from mmc ...; " \ 73 "env import -t $loadaddr $filesize\0" \ 74 "mmc_args=run bootargs_defaults;" \ 75 "mtdparts default;" \ 76 "setenv bootargs ${bootargs} " \ 77 "root=${mmc_root} ${mtdparts}" \ 78 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ 79 "eth=${ethaddr} " \ 80 "\0" \ 81 "mmc_boot=run mmc_args; " \ 82 "run mmc_load_uimage; " \ 83 "bootm ${kloadaddr}\0" \ 84 "" 85 86 #ifndef CONFIG_RESTORE_FLASH 87 /* set to negative value for no autoboot */ 88 89 #define CONFIG_BOOTCOMMAND \ 90 "if dfubutton; then " \ 91 "run dfu_start; " \ 92 "reset; " \ 93 "fi; " \ 94 "if mmc rescan; then " \ 95 "echo SD/MMC found on device ${mmc_dev};" \ 96 "if run loadbootenv; then " \ 97 "echo Loaded environment from ${bootenv};" \ 98 "run importbootenv;" \ 99 "fi;" \ 100 "if test -n $uenvcmd; then " \ 101 "echo Running uenvcmd ...;" \ 102 "run uenvcmd;" \ 103 "fi;" \ 104 "if run mmc_load_uimage; then " \ 105 "run mmc_args;" \ 106 "bootm ${kloadaddr};" \ 107 "fi;" \ 108 "fi;" \ 109 "run nand_boot;" \ 110 "reset;" 111 112 #else 113 114 #define CONFIG_BOOTCOMMAND \ 115 "setenv autoload no; " \ 116 "dhcp; " \ 117 "if tftp 80000000 debrick.scr; then " \ 118 "source 80000000; " \ 119 "fi" 120 #endif 121 #endif /* CONFIG_SPL_BUILD */ 122 123 #if defined(CONFIG_VIDEO) 124 #define CONFIG_VIDEO_DA8XX 125 #define CONFIG_SPLASH_SCREEN 126 #define CONFIG_SPLASH_SCREEN_ALIGN 127 #define CONFIG_VIDEO_LOGO 128 #define CONFIG_VIDEO_BMP_RLE8 129 #define CONFIG_VIDEO_BMP_LOGO 130 #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE 131 #define PWM_TICKS 0x1388 132 #define PWM_DUTY 0x200 133 #endif 134 135 #endif /* ! __CONFIG_PXM2_H */ 136