1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2017 Linaro 4 * 5 * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 6 * 7 * Configuration for Poplar 96boards CE. Parts were derived from other ARM 8 * configurations. 9 */ 10 11 #ifndef _POPLAR_H_ 12 #define _POPLAR_H_ 13 14 #include <linux/sizes.h> 15 16 /* DRAM banks */ 17 18 /* SYS */ 19 #define CONFIG_SYS_BOOTM_LEN SZ_64M 20 #define CONFIG_SYS_INIT_SP_ADDR 0x200000 21 #define CONFIG_SYS_LOAD_ADDR 0x800000 22 #define CONFIG_SYS_MALLOC_LEN SZ_32M 23 24 /* ATF bl33.bin load address (must match) */ 25 26 /* USB configuration */ 27 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 28 29 /* SD/MMC */ 30 #define CONFIG_BOUNCE_BUFFER 31 32 /***************************************************************************** 33 * Initial environment variables 34 *****************************************************************************/ 35 36 #define BOOT_TARGET_DEVICES(func) \ 37 func(USB, usb, 0) \ 38 func(MMC, mmc, 0) \ 39 func(DHCP, dhcp, na) 40 #ifndef CONFIG_SPL_BUILD 41 #include <config_distro_bootcmd.h> 42 #endif 43 44 #define CONFIG_EXTRA_ENV_SETTINGS \ 45 "loader_mmc_blknum=0x0\0" \ 46 "loader_mmc_nblks=0x780\0" \ 47 "env_mmc_blknum=0xf80\0" \ 48 "env_mmc_nblks=0x80\0" \ 49 "kernel_addr_r=0x30000000\0" \ 50 "pxefile_addr_r=0x32000000\0" \ 51 "scriptaddr=0x32000000\0" \ 52 "fdt_addr_r=0x32200000\0" \ 53 "fdtfile=hisilicon/hi3798cv200-poplar.dtb\0" \ 54 "ramdisk_addr_r=0x32400000\0" \ 55 BOOTENV 56 57 58 /* Command line configuration */ 59 #define CONFIG_SYS_MMC_ENV_DEV 0 60 #define CONFIG_ENV_OFFSET (0xf80 * 512) /* env_mmc_blknum bytes */ 61 #define CONFIG_ENV_SIZE (0x80 * 512) /* env_mmc_nblks bytes */ 62 63 /* Monitor Command Prompt */ 64 #define CONFIG_SYS_CBSIZE 512 65 #define CONFIG_SYS_MAXARGS 64 66 67 #endif /* _POPLAR_H_ */ 68