xref: /openbmc/u-boot/include/configs/pogo_e02.h (revision ee7bb5be)
1 /*
2  * Copyright (C) 2012
3  * David Purdy <david.c.purdy@gmail.com>
4  *
5  * Based on Kirkwood support:
6  * (C) Copyright 2009
7  * Marvell Semiconductor <www.marvell.com>
8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #ifndef _CONFIG_POGO_E02_H
14 #define _CONFIG_POGO_E02_H
15 
16 /*
17  * Machine type definition and ID
18  */
19 #define MACH_TYPE_POGO_E02		3542
20 #define CONFIG_MACH_TYPE		MACH_TYPE_POGO_E02
21 #define CONFIG_IDENT_STRING		"\nPogo E02"
22 
23 /*
24  * High Level Configuration Options (easy to change)
25  */
26 #define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
27 #define CONFIG_KW88F6281		/* SOC Name */
28 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
29 
30 /*
31  * Commands configuration
32  */
33 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
34 #define CONFIG_SYS_MVFS
35 #define CONFIG_CMD_ENV
36 #define CONFIG_CMD_NAND
37 
38 /*
39  * mv-common.h should be defined after CMD configs since it used them
40  * to enable certain macros
41  */
42 #include "mv-common.h"
43 
44 /*
45  *  Environment variables configurations
46  */
47 #ifdef CONFIG_CMD_NAND
48 #define CONFIG_ENV_IS_IN_NAND
49 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
50 #else
51 #define CONFIG_ENV_IS_NOWHERE
52 #endif
53 
54 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
55 #define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
56 
57 /*
58  * Default environment variables
59  */
60 #define CONFIG_BOOTCOMMAND \
61 	"setenv bootargs $(bootargs_console); " \
62 	"run bootcmd_usb; " \
63 	"bootm 0x00800000 0x01100000"
64 
65 #define CONFIG_EXTRA_ENV_SETTINGS \
66 	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
67 	"32M(rootfs),-(data)\0"\
68 	"mtdids=nand0=orion_nand\0"\
69 	"bootargs_console=console=ttyS0,115200\0" \
70 	"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
71 	"ext2load usb 0:1 0x01100000 /uInitrd\0"
72 
73 /*
74  * Ethernet Driver configuration
75  */
76 #ifdef CONFIG_CMD_NET
77 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
78 #define CONFIG_PHY_BASE_ADR	0
79 #endif /* CONFIG_CMD_NET */
80 
81 /*
82  * File system
83  */
84 #define CONFIG_CMD_JFFS2
85 #define CONFIG_CMD_UBI
86 #define CONFIG_CMD_UBIFS
87 #define CONFIG_RBTREE
88 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
89 #define CONFIG_MTD_PARTITIONS
90 #define CONFIG_CMD_MTDPARTS
91 #define CONFIG_LZO
92 
93 #endif /* _CONFIG_POGO_E02_H */
94