1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 #define CONFIG_SYS_GENERIC_BOARD 17 18 /* 19 * Machine type definition and ID 20 */ 21 #define MACH_TYPE_POGO_E02 3542 22 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 23 #define CONFIG_IDENT_STRING "\nPogo E02" 24 25 /* 26 * High Level Configuration Options (easy to change) 27 */ 28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 /* SOC Name */ 30 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 31 32 /* 33 * Commands configuration 34 */ 35 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 36 #define CONFIG_SYS_MVFS 37 #include <config_cmd_default.h> 38 #define CONFIG_CMD_DHCP 39 #define CONFIG_CMD_ENV 40 #define CONFIG_CMD_MII 41 #define CONFIG_CMD_NAND 42 #define CONFIG_CMD_PING 43 #define CONFIG_CMD_USB 44 45 /* 46 * mv-common.h should be defined after CMD configs since it used them 47 * to enable certain macros 48 */ 49 #include "mv-common.h" 50 51 /* Remove or override few declarations from mv-common.h */ 52 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 53 #define CONFIG_SYS_PROMPT "PogoE02> " 54 55 /* 56 * Environment variables configurations 57 */ 58 #ifdef CONFIG_CMD_NAND 59 #define CONFIG_ENV_IS_IN_NAND 60 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 61 #else 62 #define CONFIG_ENV_IS_NOWHERE 63 #endif 64 65 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 66 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 67 68 /* 69 * Default environment variables 70 */ 71 #define CONFIG_BOOTCOMMAND \ 72 "setenv bootargs $(bootargs_console); " \ 73 "run bootcmd_usb; " \ 74 "bootm 0x00800000 0x01100000" 75 76 #define CONFIG_EXTRA_ENV_SETTINGS \ 77 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 78 "32M(rootfs),-(data)\0"\ 79 "mtdids=nand0=orion_nand\0"\ 80 "bootargs_console=console=ttyS0,115200\0" \ 81 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 82 "ext2load usb 0:1 0x01100000 /uInitrd\0" 83 84 /* 85 * Ethernet Driver configuration 86 */ 87 #ifdef CONFIG_CMD_NET 88 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 89 #define CONFIG_PHY_BASE_ADR 0 90 #endif /* CONFIG_CMD_NET */ 91 92 /* 93 * File system 94 */ 95 #define CONFIG_CMD_EXT2 96 #define CONFIG_CMD_FAT 97 #define CONFIG_CMD_JFFS2 98 #define CONFIG_CMD_UBI 99 #define CONFIG_CMD_UBIFS 100 #define CONFIG_RBTREE 101 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 102 #define CONFIG_MTD_PARTITIONS 103 #define CONFIG_CMD_MTDPARTS 104 #define CONFIG_LZO 105 106 #endif /* _CONFIG_POGO_E02_H */ 107