1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 /* 17 * Machine type definition and ID 18 */ 19 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 20 21 /* 22 * High Level Configuration Options (easy to change) 23 */ 24 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 25 #define CONFIG_KW88F6281 /* SOC Name */ 26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 27 28 /* 29 * Commands configuration 30 */ 31 #define CONFIG_SYS_MVFS 32 33 /* 34 * mv-common.h should be defined after CMD configs since it used them 35 * to enable certain macros 36 */ 37 #include "mv-common.h" 38 39 /* 40 * Environment variables configurations 41 */ 42 #ifdef CONFIG_CMD_NAND 43 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 44 #endif 45 46 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 47 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 48 49 /* 50 * Default environment variables 51 */ 52 #define CONFIG_BOOTCOMMAND \ 53 "setenv bootargs $(bootargs_console); " \ 54 "run bootcmd_usb; " \ 55 "bootm 0x00800000 0x01100000" 56 57 #define CONFIG_EXTRA_ENV_SETTINGS \ 58 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 59 "32M(rootfs),-(data)\0"\ 60 "mtdids=nand0=orion_nand\0"\ 61 "bootargs_console=console=ttyS0,115200\0" \ 62 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 63 "ext2load usb 0:1 0x01100000 /uInitrd\0" 64 65 /* 66 * Ethernet Driver configuration 67 */ 68 #ifdef CONFIG_CMD_NET 69 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 70 #define CONFIG_PHY_BASE_ADR 0 71 #endif /* CONFIG_CMD_NET */ 72 73 /* 74 * File system 75 */ 76 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 77 #define CONFIG_MTD_PARTITIONS 78 79 #endif /* _CONFIG_POGO_E02_H */ 80