1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2012 4 * David Purdy <david.c.purdy@gmail.com> 5 * 6 * Based on Kirkwood support: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 */ 11 12 #ifndef _CONFIG_POGO_E02_H 13 #define _CONFIG_POGO_E02_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* 28 * Commands configuration 29 */ 30 31 /* 32 * mv-common.h should be defined after CMD configs since it used them 33 * to enable certain macros 34 */ 35 #include "mv-common.h" 36 37 /* 38 * Environment variables configurations 39 */ 40 #ifdef CONFIG_CMD_NAND 41 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 42 #endif 43 44 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 45 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 46 47 /* 48 * Default environment variables 49 */ 50 #define CONFIG_BOOTCOMMAND \ 51 "setenv bootargs $(bootargs_console); " \ 52 "run bootcmd_usb; " \ 53 "bootm 0x00800000 0x01100000" 54 55 #define CONFIG_EXTRA_ENV_SETTINGS \ 56 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 57 "32M(rootfs),-(data)\0"\ 58 "mtdids=nand0=orion_nand\0"\ 59 "bootargs_console=console=ttyS0,115200\0" \ 60 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 61 "ext2load usb 0:1 0x01100000 /uInitrd\0" 62 63 /* 64 * Ethernet Driver configuration 65 */ 66 #ifdef CONFIG_CMD_NET 67 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 68 #define CONFIG_PHY_BASE_ADR 0 69 #endif /* CONFIG_CMD_NET */ 70 71 /* 72 * File system 73 */ 74 75 #endif /* _CONFIG_POGO_E02_H */ 76