1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 /* 17 * Machine type definition and ID 18 */ 19 #define MACH_TYPE_POGO_E02 3542 20 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 21 #define CONFIG_IDENT_STRING "\nPogo E02" 22 23 /* 24 * High Level Configuration Options (easy to change) 25 */ 26 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 27 #define CONFIG_KW88F6281 /* SOC Name */ 28 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 29 30 /* 31 * Commands configuration 32 */ 33 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 34 #define CONFIG_SYS_MVFS 35 #define CONFIG_CMD_ENV 36 #define CONFIG_CMD_MII 37 #define CONFIG_CMD_NAND 38 39 /* 40 * mv-common.h should be defined after CMD configs since it used them 41 * to enable certain macros 42 */ 43 #include "mv-common.h" 44 45 /* 46 * Environment variables configurations 47 */ 48 #ifdef CONFIG_CMD_NAND 49 #define CONFIG_ENV_IS_IN_NAND 50 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 51 #else 52 #define CONFIG_ENV_IS_NOWHERE 53 #endif 54 55 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 56 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 57 58 /* 59 * Default environment variables 60 */ 61 #define CONFIG_BOOTCOMMAND \ 62 "setenv bootargs $(bootargs_console); " \ 63 "run bootcmd_usb; " \ 64 "bootm 0x00800000 0x01100000" 65 66 #define CONFIG_EXTRA_ENV_SETTINGS \ 67 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 68 "32M(rootfs),-(data)\0"\ 69 "mtdids=nand0=orion_nand\0"\ 70 "bootargs_console=console=ttyS0,115200\0" \ 71 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 72 "ext2load usb 0:1 0x01100000 /uInitrd\0" 73 74 /* 75 * Ethernet Driver configuration 76 */ 77 #ifdef CONFIG_CMD_NET 78 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 79 #define CONFIG_PHY_BASE_ADR 0 80 #endif /* CONFIG_CMD_NET */ 81 82 /* 83 * File system 84 */ 85 #define CONFIG_CMD_EXT2 86 #define CONFIG_CMD_FAT 87 #define CONFIG_CMD_JFFS2 88 #define CONFIG_CMD_UBI 89 #define CONFIG_CMD_UBIFS 90 #define CONFIG_RBTREE 91 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 92 #define CONFIG_MTD_PARTITIONS 93 #define CONFIG_CMD_MTDPARTS 94 #define CONFIG_LZO 95 96 #endif /* _CONFIG_POGO_E02_H */ 97