1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 /* 17 * Machine type definition and ID 18 */ 19 #define MACH_TYPE_POGO_E02 3542 20 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 21 #define CONFIG_IDENT_STRING "\nPogo E02" 22 23 /* 24 * High Level Configuration Options (easy to change) 25 */ 26 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 27 #define CONFIG_KIRKWOOD /* SOC Family Name */ 28 #define CONFIG_KW88F6281 /* SOC Name */ 29 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 30 31 /* 32 * Commands configuration 33 */ 34 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 35 #define CONFIG_SYS_MVFS 36 #include <config_cmd_default.h> 37 #define CONFIG_CMD_DHCP 38 #define CONFIG_CMD_ENV 39 #define CONFIG_CMD_MII 40 #define CONFIG_CMD_NAND 41 #define CONFIG_CMD_PING 42 #define CONFIG_CMD_USB 43 44 /* 45 * mv-common.h should be defined after CMD configs since it used them 46 * to enable certain macros 47 */ 48 #include "mv-common.h" 49 50 /* Remove or override few declarations from mv-common.h */ 51 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 52 #define CONFIG_SYS_PROMPT "PogoE02> " 53 54 /* 55 * Environment variables configurations 56 */ 57 #ifdef CONFIG_CMD_NAND 58 #define CONFIG_ENV_IS_IN_NAND 59 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 60 #else 61 #define CONFIG_ENV_IS_NOWHERE 62 #endif 63 64 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 65 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 66 67 /* 68 * Default environment variables 69 */ 70 #define CONFIG_BOOTCOMMAND \ 71 "setenv bootargs $(bootargs_console); " \ 72 "run bootcmd_usb; " \ 73 "bootm 0x00800000 0x01100000" 74 75 #define CONFIG_EXTRA_ENV_SETTINGS \ 76 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 77 "32M(rootfs),-(data)\0"\ 78 "mtdids=nand0=orion_nand\0"\ 79 "bootargs_console=console=ttyS0,115200\0" \ 80 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 81 "ext2load usb 0:1 0x01100000 /uInitrd\0" 82 83 /* 84 * Ethernet Driver configuration 85 */ 86 #ifdef CONFIG_CMD_NET 87 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 88 #define CONFIG_PHY_BASE_ADR 0 89 #endif /* CONFIG_CMD_NET */ 90 91 /* 92 * File system 93 */ 94 #define CONFIG_CMD_EXT2 95 #define CONFIG_CMD_FAT 96 #define CONFIG_CMD_JFFS2 97 #define CONFIG_CMD_UBI 98 #define CONFIG_CMD_UBIFS 99 #define CONFIG_RBTREE 100 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 101 #define CONFIG_MTD_PARTITIONS 102 #define CONFIG_CMD_MTDPARTS 103 #define CONFIG_LZO 104 105 #endif /* _CONFIG_POGO_E02_H */ 106