1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2012 4 * David Purdy <david.c.purdy@gmail.com> 5 * 6 * Based on Kirkwood support: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 */ 11 12 #ifndef _CONFIG_POGO_E02_H 13 #define _CONFIG_POGO_E02_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* 28 * Commands configuration 29 */ 30 #define CONFIG_SYS_MVFS 31 32 /* 33 * mv-common.h should be defined after CMD configs since it used them 34 * to enable certain macros 35 */ 36 #include "mv-common.h" 37 38 /* 39 * Environment variables configurations 40 */ 41 #ifdef CONFIG_CMD_NAND 42 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 43 #endif 44 45 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 46 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 47 48 /* 49 * Default environment variables 50 */ 51 #define CONFIG_BOOTCOMMAND \ 52 "setenv bootargs $(bootargs_console); " \ 53 "run bootcmd_usb; " \ 54 "bootm 0x00800000 0x01100000" 55 56 #define CONFIG_EXTRA_ENV_SETTINGS \ 57 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 58 "32M(rootfs),-(data)\0"\ 59 "mtdids=nand0=orion_nand\0"\ 60 "bootargs_console=console=ttyS0,115200\0" \ 61 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 62 "ext2load usb 0:1 0x01100000 /uInitrd\0" 63 64 /* 65 * Ethernet Driver configuration 66 */ 67 #ifdef CONFIG_CMD_NET 68 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 69 #define CONFIG_PHY_BASE_ADR 0 70 #endif /* CONFIG_CMD_NET */ 71 72 /* 73 * File system 74 */ 75 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 76 #define CONFIG_MTD_PARTITIONS 77 78 #endif /* _CONFIG_POGO_E02_H */ 79