1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 17 /* 18 * Machine type definition and ID 19 */ 20 #define MACH_TYPE_POGO_E02 3542 21 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 22 #define CONFIG_IDENT_STRING "\nPogo E02" 23 24 /* 25 * High Level Configuration Options (easy to change) 26 */ 27 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 28 #define CONFIG_KW88F6281 /* SOC Name */ 29 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 30 31 /* 32 * Commands configuration 33 */ 34 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 35 #define CONFIG_SYS_MVFS 36 #define CONFIG_CMD_ENV 37 #define CONFIG_CMD_MII 38 #define CONFIG_CMD_NAND 39 40 /* 41 * mv-common.h should be defined after CMD configs since it used them 42 * to enable certain macros 43 */ 44 #include "mv-common.h" 45 46 /* 47 * Environment variables configurations 48 */ 49 #ifdef CONFIG_CMD_NAND 50 #define CONFIG_ENV_IS_IN_NAND 51 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 52 #else 53 #define CONFIG_ENV_IS_NOWHERE 54 #endif 55 56 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 57 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 58 59 /* 60 * Default environment variables 61 */ 62 #define CONFIG_BOOTCOMMAND \ 63 "setenv bootargs $(bootargs_console); " \ 64 "run bootcmd_usb; " \ 65 "bootm 0x00800000 0x01100000" 66 67 #define CONFIG_EXTRA_ENV_SETTINGS \ 68 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 69 "32M(rootfs),-(data)\0"\ 70 "mtdids=nand0=orion_nand\0"\ 71 "bootargs_console=console=ttyS0,115200\0" \ 72 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 73 "ext2load usb 0:1 0x01100000 /uInitrd\0" 74 75 /* 76 * Ethernet Driver configuration 77 */ 78 #ifdef CONFIG_CMD_NET 79 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 80 #define CONFIG_PHY_BASE_ADR 0 81 #endif /* CONFIG_CMD_NET */ 82 83 /* 84 * File system 85 */ 86 #define CONFIG_CMD_EXT2 87 #define CONFIG_CMD_FAT 88 #define CONFIG_CMD_JFFS2 89 #define CONFIG_CMD_UBI 90 #define CONFIG_CMD_UBIFS 91 #define CONFIG_RBTREE 92 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 93 #define CONFIG_MTD_PARTITIONS 94 #define CONFIG_CMD_MTDPARTS 95 #define CONFIG_LZO 96 97 #endif /* _CONFIG_POGO_E02_H */ 98