1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * See file CREDITS for list of people who contributed to this 11 * project. 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of 16 * the License, or (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; If not, see <http://www.gnu.org/licenses/>. 25 */ 26 27 #ifndef _CONFIG_POGO_E02_H 28 #define _CONFIG_POGO_E02_H 29 30 /* 31 * Machine type definition and ID 32 */ 33 #define MACH_TYPE_POGO_E02 3542 34 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 35 #define CONFIG_IDENT_STRING "\nPogo E02" 36 37 /* 38 * High Level Configuration Options (easy to change) 39 */ 40 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 41 #define CONFIG_KIRKWOOD /* SOC Family Name */ 42 #define CONFIG_KW88F6281 /* SOC Name */ 43 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 44 45 /* 46 * Commands configuration 47 */ 48 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 49 #define CONFIG_SYS_MVFS 50 #include <config_cmd_default.h> 51 #define CONFIG_CMD_DHCP 52 #define CONFIG_CMD_ENV 53 #define CONFIG_CMD_MII 54 #define CONFIG_CMD_NAND 55 #define CONFIG_CMD_PING 56 #define CONFIG_CMD_USB 57 58 /* 59 * mv-common.h should be defined after CMD configs since it used them 60 * to enable certain macros 61 */ 62 #include "mv-common.h" 63 64 /* Remove or override few declarations from mv-common.h */ 65 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 66 #define CONFIG_SYS_PROMPT "PogoE02> " 67 68 /* 69 * Environment variables configurations 70 */ 71 #ifdef CONFIG_CMD_NAND 72 #define CONFIG_ENV_IS_IN_NAND 73 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 74 #else 75 #define CONFIG_ENV_IS_NOWHERE 76 #endif 77 78 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 79 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 80 81 /* 82 * Default environment variables 83 */ 84 #define CONFIG_BOOTCOMMAND \ 85 "setenv bootargs $(bootargs_console); " \ 86 "run bootcmd_usb; " \ 87 "bootm 0x00800000 0x01100000" 88 89 #define CONFIG_EXTRA_ENV_SETTINGS \ 90 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 91 "32M(rootfs),-(data)\0"\ 92 "mtdids=nand0=orion_nand\0"\ 93 "bootargs_console=console=ttyS0,115200\0" \ 94 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 95 "ext2load usb 0:1 0x01100000 /uInitrd\0" 96 97 /* 98 * Ethernet Driver configuration 99 */ 100 #ifdef CONFIG_CMD_NET 101 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 102 #define CONFIG_PHY_BASE_ADR 0 103 #endif /* CONFIG_CMD_NET */ 104 105 /* 106 * File system 107 */ 108 #define CONFIG_CMD_EXT2 109 #define CONFIG_CMD_FAT 110 #define CONFIG_CMD_JFFS2 111 #define CONFIG_CMD_UBI 112 #define CONFIG_CMD_UBIFS 113 #define CONFIG_RBTREE 114 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 115 #define CONFIG_MTD_PARTITIONS 116 #define CONFIG_CMD_MTDPARTS 117 #define CONFIG_LZO 118 119 #endif /* _CONFIG_POGO_E02_H */ 120