1 /* 2 * Copyright (C) 2012 3 * David Purdy <david.c.purdy@gmail.com> 4 * 5 * Based on Kirkwood support: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _CONFIG_POGO_E02_H 14 #define _CONFIG_POGO_E02_H 15 16 /* 17 * Machine type definition and ID 18 */ 19 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 20 21 /* 22 * High Level Configuration Options (easy to change) 23 */ 24 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 25 #define CONFIG_KW88F6281 /* SOC Name */ 26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 27 28 /* 29 * Commands configuration 30 */ 31 #define CONFIG_SYS_MVFS 32 #define CONFIG_CMD_ENV 33 #define CONFIG_CMD_NAND 34 35 /* 36 * mv-common.h should be defined after CMD configs since it used them 37 * to enable certain macros 38 */ 39 #include "mv-common.h" 40 41 /* 42 * Environment variables configurations 43 */ 44 #ifdef CONFIG_CMD_NAND 45 #define CONFIG_ENV_IS_IN_NAND 46 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 47 #else 48 #define CONFIG_ENV_IS_NOWHERE 49 #endif 50 51 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 52 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 53 54 /* 55 * Default environment variables 56 */ 57 #define CONFIG_BOOTCOMMAND \ 58 "setenv bootargs $(bootargs_console); " \ 59 "run bootcmd_usb; " \ 60 "bootm 0x00800000 0x01100000" 61 62 #define CONFIG_EXTRA_ENV_SETTINGS \ 63 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ 64 "32M(rootfs),-(data)\0"\ 65 "mtdids=nand0=orion_nand\0"\ 66 "bootargs_console=console=ttyS0,115200\0" \ 67 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ 68 "ext2load usb 0:1 0x01100000 /uInitrd\0" 69 70 /* 71 * Ethernet Driver configuration 72 */ 73 #ifdef CONFIG_CMD_NET 74 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 75 #define CONFIG_PHY_BASE_ADR 0 76 #endif /* CONFIG_CMD_NET */ 77 78 /* 79 * File system 80 */ 81 #define CONFIG_CMD_JFFS2 82 #define CONFIG_CMD_UBIFS 83 #define CONFIG_RBTREE 84 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 85 #define CONFIG_MTD_PARTITIONS 86 #define CONFIG_CMD_MTDPARTS 87 #define CONFIG_LZO 88 89 #endif /* _CONFIG_POGO_E02_H */ 90