1 /* 2 * (C) Copyright 2010 3 * Ilko Iliev <iliev@ronetix.at> 4 * Asen Dimov <dimov@ronetix.at> 5 * Ronetix GmbH <www.ronetix.at> 6 * 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian.pop@leadtechdesign.com> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * Configuation settings for the PM9G45 board. 12 * 13 * See file CREDITS for list of people who contributed to this 14 * project. 15 * 16 * This program is free software; you can redistribute it and/or 17 * modify it under the terms of the GNU General Public License as 18 * published by the Free Software Foundation; either version 2 of 19 * the License, or (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, write to the Free Software 28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 29 * MA 02111-1307 USA 30 */ 31 32 #ifndef __CONFIG_H 33 #define __CONFIG_H 34 35 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ 36 #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ 37 #define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */ 38 39 /* ARM asynchronous clock */ 40 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 41 #define CONFIG_SYS_HZ 1000 42 43 #define CONFIG_ARCH_CPU_INIT 44 45 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 1 47 #define CONFIG_INITRD_TAG 1 48 49 #define CONFIG_SKIP_LOWLEVEL_INIT 50 #define CONFIG_SKIP_RELOCATE_UBOOT 51 52 /* 53 * Hardware drivers 54 */ 55 #define CONFIG_AT91_GPIO 1 56 #define CONFIG_ATMEL_USART 1 57 #define CONFIG_USART3 1 /* USART 3 is DBGU */ 58 59 #define CONFIG_SYS_USE_NANDFLASH 1 60 61 /* LED */ 62 #define CONFIG_AT91_LED 63 #define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */ 64 #define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */ 65 66 #define CONFIG_BOOTDELAY 3 67 68 /* 69 * BOOTP options 70 */ 71 #define CONFIG_BOOTP_BOOTFILESIZE 1 72 #define CONFIG_BOOTP_BOOTPATH 1 73 #define CONFIG_BOOTP_GATEWAY 1 74 #define CONFIG_BOOTP_HOSTNAME 1 75 76 /* 77 * Command line configuration. 78 */ 79 #include <config_cmd_default.h> 80 #undef CONFIG_CMD_FPGA 81 #undef CONFIG_CMD_IMLS 82 83 #define CONFIG_CMD_PING 1 84 #define CONFIG_CMD_DHCP 1 85 #define CONFIG_CMD_NAND 1 86 #define CONFIG_CMD_USB 1 87 88 #define CONFIG_CMD_JFFS2 1 89 #define CONFIG_JFFS2_CMDLINE 1 90 #define CONFIG_JFFS2_NAND 1 91 #define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ 92 #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ 93 #define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */ 94 95 /* SDRAM */ 96 #define CONFIG_NR_DRAM_BANKS 1 97 #define PHYS_SDRAM 0x70000000 98 #define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ 99 100 /* NOR flash, not available */ 101 #define CONFIG_SYS_NO_FLASH 1 102 #undef CONFIG_CMD_FLASH 103 104 /* NAND flash */ 105 #ifdef CONFIG_CMD_NAND 106 #define CONFIG_NAND_MAX_CHIPS 1 107 #define CONFIG_NAND_ATMEL 108 #define CONFIG_SYS_MAX_NAND_DEVICE 1 109 #define CONFIG_SYS_NAND_BASE 0x40000000 110 #define CONFIG_SYS_NAND_DBW_8 1 111 /* our ALE is AD21 */ 112 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 113 /* our CLE is AD22 */ 114 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 115 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 116 #define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3 117 118 #endif 119 120 /* Ethernet */ 121 #define CONFIG_MACB 1 122 #define CONFIG_RMII 1 123 #define CONFIG_NET_MULTI 1 124 #define CONFIG_NET_RETRY_COUNT 20 125 #define CONFIG_RESET_PHY_R 1 126 127 /* USB */ 128 #define CONFIG_USB_ATMEL 129 #define CONFIG_USB_OHCI_NEW 1 130 #define CONFIG_DOS_PARTITION 1 131 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 132 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */ 133 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" 134 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 135 #define CONFIG_USB_STORAGE 1 136 137 /* board specific(not enough SRAM) */ 138 #define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000 139 140 #define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */ 141 142 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 143 #define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE 144 145 /* bootstrap + u-boot + env + linux in nandflash */ 146 #define CONFIG_ENV_IS_IN_NAND 1 147 #define CONFIG_ENV_OFFSET 0x60000 148 #define CONFIG_ENV_OFFSET_REDUND 0x80000 149 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 150 #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" 151 #define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \ 152 "console=ttyS0,115200 " \ 153 "root=/dev/mtdblock4 " \ 154 "mtdparts=atmel_nand:128k(bootstrap)ro," \ 155 "256k(uboot)ro,1664k(env)," \ 156 "2M(linux)ro,-(root) rw " \ 157 "rootfstype=jffs2" 158 159 #define CONFIG_BAUDRATE 115200 160 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } 161 162 #define CONFIG_SYS_PROMPT "U-Boot> " 163 #define CONFIG_SYS_CBSIZE 256 164 #define CONFIG_SYS_MAXARGS 16 165 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 166 sizeof(CONFIG_SYS_PROMPT) + 16) 167 #define CONFIG_SYS_LONGHELP 1 168 #define CONFIG_CMDLINE_EDITING 1 169 #define CONFIG_AUTO_COMPLETE 170 #define CONFIG_SYS_HUSH_PARSER 171 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 172 173 /* 174 * Size of malloc() pool 175 */ 176 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ 177 0x1000) 178 179 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ 180 181 #ifdef CONFIG_USE_IRQ 182 #error CONFIG_USE_IRQ not supported 183 #endif 184 185 #endif 186