1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * Ilko Iliev <www.ronetix.at> 6 * 7 * Configuation settings for the RONETIX PM9263 board. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 /* 16 * SoC must be defined first, before hardware.h is included. 17 * In this case SoC is defined in boards.cfg. 18 */ 19 #include <asm/hardware.h> 20 21 /* ARM asynchronous clock */ 22 23 #define MASTER_PLL_DIV 6 24 #define MASTER_PLL_MUL 65 25 #define MAIN_PLL_DIV 2 /* 2 or 4 */ 26 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 27 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 28 29 #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" 30 #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ 31 #define CONFIG_ARCH_CPU_INIT 32 33 #define CONFIG_MACH_TYPE MACH_TYPE_PM9263 34 35 /* clocks */ 36 #define CONFIG_SYS_MOR_VAL \ 37 (AT91_PMC_MOR_MOSCEN | \ 38 (255 << 8)) /* Main Oscillator Start-up Time */ 39 #define CONFIG_SYS_PLLAR_VAL \ 40 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ 41 AT91_PMC_PLLXR_OUT(3) | \ 42 AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\ 43 (2 << 28) | /* PLL Clock Frequency Range */ \ 44 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) 45 46 #if (MAIN_PLL_DIV == 2) 47 /* PCK/2 = MCK Master Clock from PLLA */ 48 #define CONFIG_SYS_MCKR1_VAL \ 49 (AT91_PMC_MCKR_CSS_SLOW | \ 50 AT91_PMC_MCKR_PRES_1 | \ 51 AT91_PMC_MCKR_MDIV_2) 52 /* PCK/2 = MCK Master Clock from PLLA */ 53 #define CONFIG_SYS_MCKR2_VAL \ 54 (AT91_PMC_MCKR_CSS_PLLA | \ 55 AT91_PMC_MCKR_PRES_1 | \ 56 AT91_PMC_MCKR_MDIV_2) 57 #else 58 /* PCK/4 = MCK Master Clock from PLLA */ 59 #define CONFIG_SYS_MCKR1_VAL \ 60 (AT91_PMC_MCKR_CSS_SLOW | \ 61 AT91_PMC_MCKR_PRES_1 | \ 62 AT91_PMC_MCKR_MDIV_4) 63 /* PCK/4 = MCK Master Clock from PLLA */ 64 #define CONFIG_SYS_MCKR2_VAL \ 65 (AT91_PMC_MCKR_CSS_PLLA | \ 66 AT91_PMC_MCKR_PRES_1 | \ 67 AT91_PMC_MCKR_MDIV_4) 68 #endif 69 /* define PDC[31:16] as DATA[31:16] */ 70 #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 71 /* no pull-up for D[31:16] */ 72 #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 73 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ 74 #define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ 75 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ 76 AT91_MATRIX_CSA_EBI_CS1A) 77 78 /* SDRAM */ 79 /* SDRAMC_MR Mode register */ 80 #define CONFIG_SYS_SDRC_MR_VAL1 0 81 /* SDRAMC_TR - Refresh Timer register */ 82 #define CONFIG_SYS_SDRC_TR_VAL1 0x3AA 83 /* SDRAMC_CR - Configuration register*/ 84 #define CONFIG_SYS_SDRC_CR_VAL \ 85 (AT91_SDRAMC_NC_9 | \ 86 AT91_SDRAMC_NR_13 | \ 87 AT91_SDRAMC_NB_4 | \ 88 AT91_SDRAMC_CAS_2 | \ 89 AT91_SDRAMC_DBW_32 | \ 90 (2 << 8) | /* tWR - Write Recovery Delay */ \ 91 (7 << 12) | /* tRC - Row Cycle Delay */ \ 92 (2 << 16) | /* tRP - Row Precharge Delay */ \ 93 (2 << 20) | /* tRCD - Row to Column Delay */ \ 94 (5 << 24) | /* tRAS - Active to Precharge Delay */ \ 95 (8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */ 96 97 /* Memory Device Register -> SDRAM */ 98 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 99 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 100 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 101 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 102 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 103 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 104 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 105 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 106 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 107 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 108 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 109 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 110 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 111 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 112 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 113 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 114 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 115 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 116 117 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 118 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 119 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 120 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 121 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 122 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 123 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 124 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 125 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 126 #define CONFIG_SYS_SMC0_MODE0_VAL \ 127 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 128 AT91_SMC_MODE_DBW_16 | \ 129 AT91_SMC_MODE_TDF | \ 130 AT91_SMC_MODE_TDF_CYCLE(6)) 131 132 /* user reset enable */ 133 #define CONFIG_SYS_RSTC_RMR_VAL \ 134 (AT91_RSTC_KEY | \ 135 AT91_RSTC_CR_PROCRST | \ 136 AT91_RSTC_MR_ERSTL(1) | \ 137 AT91_RSTC_MR_ERSTL(2)) 138 139 /* Disable Watchdog */ 140 #define CONFIG_SYS_WDTC_WDMR_VAL \ 141 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 142 AT91_WDT_MR_WDV(0xfff) | \ 143 AT91_WDT_MR_WDDIS | \ 144 AT91_WDT_MR_WDD(0xfff)) 145 146 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 147 #define CONFIG_SETUP_MEMORY_TAGS 1 148 #define CONFIG_INITRD_TAG 1 149 150 #undef CONFIG_SKIP_LOWLEVEL_INIT 151 #define CONFIG_USER_LOWLEVEL_INIT 1 152 153 /* 154 * Hardware drivers 155 */ 156 /* LCD */ 157 #define LCD_BPP LCD_COLOR8 158 #define CONFIG_LCD_LOGO 1 159 #undef LCD_TEST_PATTERN 160 #define CONFIG_LCD_INFO 1 161 #define CONFIG_LCD_INFO_BELOW_LOGO 1 162 #define CONFIG_ATMEL_LCD 1 163 #define CONFIG_ATMEL_LCD_BGR555 1 164 165 #define CONFIG_LCD_IN_PSRAM 1 166 167 /* 168 * BOOTP options 169 */ 170 #define CONFIG_BOOTP_BOOTFILESIZE 1 171 #define CONFIG_BOOTP_BOOTPATH 1 172 #define CONFIG_BOOTP_GATEWAY 1 173 #define CONFIG_BOOTP_HOSTNAME 1 174 175 /* SDRAM */ 176 #define CONFIG_NR_DRAM_BANKS 1 177 #define PHYS_SDRAM 0x20000000 178 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 179 180 /* NOR flash, if populated */ 181 #define CONFIG_SYS_FLASH_CFI 1 182 #define CONFIG_FLASH_CFI_DRIVER 1 183 #define PHYS_FLASH_1 0x10000000 184 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 185 #define CONFIG_SYS_MAX_FLASH_SECT 256 186 #define CONFIG_SYS_MAX_FLASH_BANKS 1 187 188 /* NAND flash */ 189 #ifdef CONFIG_CMD_NAND 190 #define CONFIG_NAND_ATMEL 191 #define CONFIG_SYS_MAX_NAND_DEVICE 1 192 #define CONFIG_SYS_NAND_BASE 0x40000000 193 #define CONFIG_SYS_NAND_DBW_8 1 194 /* our ALE is AD21 */ 195 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 196 /* our CLE is AD22 */ 197 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 198 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) 199 #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(30) 200 201 #endif 202 203 #define CONFIG_JFFS2_CMDLINE 1 204 #define CONFIG_JFFS2_NAND 1 205 #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ 206 #define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ 207 #define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ 208 209 /* PSRAM */ 210 #define PHYS_PSRAM 0x70000000 211 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ 212 /* Slave EBI1, PSRAM connected */ 213 #define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ 214 AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ 215 AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ 216 AT91_MATRIX_SCFG_SLOT_CYCLE(255)) 217 218 /* Ethernet */ 219 #define CONFIG_MACB 1 220 #define CONFIG_RMII 1 221 #define CONFIG_NET_RETRY_COUNT 20 222 #define CONFIG_RESET_PHY_R 1 223 224 /* USB */ 225 #define CONFIG_USB_ATMEL 226 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 227 #define CONFIG_USB_OHCI_NEW 1 228 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 229 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ 230 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" 231 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 232 233 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 234 235 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 236 #define CONFIG_SYS_MEMTEST_END 0x23e00000 237 238 #define CONFIG_SYS_USE_FLASH 1 239 #undef CONFIG_SYS_USE_DATAFLASH 240 #undef CONFIG_SYS_USE_NANDFLASH 241 242 #ifdef CONFIG_SYS_USE_DATAFLASH 243 244 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 245 #define CONFIG_ENV_OFFSET 0x4200 246 #define CONFIG_ENV_SIZE 0x4200 247 #define CONFIG_ENV_SECT_SIZE 0x210 248 #define CONFIG_ENV_SPI_MAX_HZ 15000000 249 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ 250 "sf read 0x22000000 0x84000 0x294000; " \ 251 "bootm 0x22000000" 252 253 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ 254 255 /* bootstrap + u-boot + env + linux in nandflash */ 256 #define CONFIG_ENV_OFFSET 0x60000 257 #define CONFIG_ENV_OFFSET_REDUND 0x80000 258 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 259 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 260 261 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ 262 263 #define CONFIG_ENV_OFFSET 0x40000 264 #define CONFIG_ENV_SECT_SIZE 0x10000 265 #define CONFIG_ENV_SIZE 0x10000 266 #define CONFIG_ENV_OVERWRITE 1 267 268 /* JFFS Partition offset set */ 269 #define CONFIG_SYS_JFFS2_FIRST_BANK 0 270 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 271 272 /* 512k reserved for u-boot */ 273 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 274 275 #define CONFIG_BOOTCOMMAND "run flashboot" 276 #define CONFIG_ROOTPATH "/ronetix/rootfs" 277 278 #define CONFIG_CON_ROT "fbcon=rotate:3 " 279 280 #define CONFIG_EXTRA_ENV_SETTINGS \ 281 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 282 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 283 "partition=nand0,0\0" \ 284 "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ 285 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 286 CONFIG_CON_ROT \ 287 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ 288 "addip=setenv bootargs $(bootargs) " \ 289 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ 290 ":$(hostname):eth0:off\0" \ 291 "ramboot=tftpboot 0x22000000 vmImage;" \ 292 "run ramargs;run addip;bootm 22000000\0" \ 293 "nfsboot=tftpboot 0x22000000 vmImage;" \ 294 "run nfsargs;run addip;bootm 22000000\0" \ 295 "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ 296 "" 297 298 #else 299 #error "Undefined memory device" 300 #endif 301 302 #define CONFIG_SYS_LONGHELP 1 303 #define CONFIG_CMDLINE_EDITING 1 304 305 /* 306 * Size of malloc() pool 307 */ 308 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) 309 310 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 311 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ 312 GENERATED_GBL_DATA_SIZE) 313 314 #endif 315