1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * Ilko Iliev <www.ronetix.at> 6 * 7 * Configuation settings for the RONETIX PM9261 board. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * SoC must be defined first, before hardware.h is included. 33 * In this case SoC is defined in boards.cfg. 34 */ 35 36 #include <asm/hardware.h> 37 /* ARM asynchronous clock */ 38 39 #define CONFIG_DISPLAY_BOARDINFO 40 41 #define MASTER_PLL_DIV 15 42 #define MASTER_PLL_MUL 162 43 #define MAIN_PLL_DIV 2 44 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 45 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 46 47 #define CONFIG_SYS_HZ 1000 48 49 #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" 50 #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ 51 #define CONFIG_ARCH_CPU_INIT 52 #define CONFIG_SYS_TEXT_BASE 0 53 54 #define MACH_TYPE_PM9261 1187 55 #define CONFIG_MACH_TYPE MACH_TYPE_PM9261 56 57 /* clocks */ 58 /* CKGR_MOR - enable main osc. */ 59 #define CONFIG_SYS_MOR_VAL \ 60 (AT91_PMC_MOR_MOSCEN | \ 61 (255 << 8)) /* Main Oscillator Start-up Time */ 62 #define CONFIG_SYS_PLLAR_VAL \ 63 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ 64 AT91_PMC_PLLXR_OUT(3) | \ 65 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) 66 67 /* PCK/2 = MCK Master Clock from PLLA */ 68 #define CONFIG_SYS_MCKR1_VAL \ 69 (AT91_PMC_MCKR_CSS_SLOW | \ 70 AT91_PMC_MCKR_PRES_1 | \ 71 AT91_PMC_MCKR_MDIV_2 | \ 72 AT91_PMC_MCKR_PLLADIV_1) 73 74 /* PCK/2 = MCK Master Clock from PLLA */ 75 #define CONFIG_SYS_MCKR2_VAL \ 76 (AT91_PMC_MCKR_CSS_PLLA | \ 77 AT91_PMC_MCKR_PRES_1 | \ 78 AT91_PMC_MCKR_MDIV_2 | \ 79 AT91_PMC_MCKR_PLLADIV_1) 80 81 /* define PDC[31:16] as DATA[31:16] */ 82 #define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 83 /* no pull-up for D[31:16] */ 84 #define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 85 86 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ 87 #define CONFIG_SYS_MATRIX_EBICSA_VAL \ 88 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) 89 90 /* SDRAM */ 91 /* SDRAMC_MR Mode register */ 92 #define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL 93 /* SDRAMC_TR - Refresh Timer register */ 94 #define CONFIG_SYS_SDRC_TR_VAL1 0x13C 95 /* SDRAMC_CR - Configuration register*/ 96 #define CONFIG_SYS_SDRC_CR_VAL \ 97 (AT91_SDRAMC_NC_9 | \ 98 AT91_SDRAMC_NR_13 | \ 99 AT91_SDRAMC_NB_4 | \ 100 AT91_SDRAMC_CAS_3 | \ 101 AT91_SDRAMC_DBW_32 | \ 102 (1 << 8) | /* Write Recovery Delay */ \ 103 (7 << 12) | /* Row Cycle Delay */ \ 104 (3 << 16) | /* Row Precharge Delay */ \ 105 (2 << 20) | /* Row to Column Delay */ \ 106 (5 << 24) | /* Active to Precharge Delay */ \ 107 (1 << 28)) /* Exit Self Refresh to Active Delay */ 108 109 /* Memory Device Register -> SDRAM */ 110 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 111 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 112 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 113 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 114 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 115 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 116 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 117 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 118 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 119 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 120 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 121 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 122 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 123 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 124 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 125 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 126 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 127 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 128 129 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 130 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 131 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 132 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 133 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 134 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 135 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 136 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 137 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 138 #define CONFIG_SYS_SMC0_MODE0_VAL \ 139 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 140 AT91_SMC_MODE_DBW_16 | \ 141 AT91_SMC_MODE_TDF | \ 142 AT91_SMC_MODE_TDF_CYCLE(6)) 143 144 /* user reset enable */ 145 #define CONFIG_SYS_RSTC_RMR_VAL \ 146 (AT91_RSTC_KEY | \ 147 AT91_RSTC_CR_PROCRST | \ 148 AT91_RSTC_MR_ERSTL(1) | \ 149 AT91_RSTC_MR_ERSTL(2)) 150 151 /* Disable Watchdog */ 152 #define CONFIG_SYS_WDTC_WDMR_VAL \ 153 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 154 AT91_WDT_MR_WDV(0xfff) | \ 155 AT91_WDT_MR_WDDIS | \ 156 AT91_WDT_MR_WDD(0xfff)) 157 158 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 159 #define CONFIG_SETUP_MEMORY_TAGS 1 160 #define CONFIG_INITRD_TAG 1 161 162 #undef CONFIG_SKIP_LOWLEVEL_INIT 163 #define CONFIG_BOARD_EARLY_INIT_F 164 165 /* 166 * Hardware drivers 167 */ 168 #define CONFIG_AT91_GPIO 1 169 #define CONFIG_ATMEL_USART 1 170 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 171 #define CONFIG_USART_ID ATMEL_ID_SYS 172 173 /* LCD */ 174 #define CONFIG_LCD 1 175 #define LCD_BPP LCD_COLOR8 176 #define CONFIG_LCD_LOGO 1 177 #undef LCD_TEST_PATTERN 178 #define CONFIG_LCD_INFO 1 179 #define CONFIG_LCD_INFO_BELOW_LOGO 1 180 #define CONFIG_SYS_WHITE_ON_BLACK 1 181 #define CONFIG_ATMEL_LCD 1 182 #define CONFIG_ATMEL_LCD_BGR555 1 183 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 184 185 /* LED */ 186 #define CONFIG_AT91_LED 187 #define CONFIG_RED_LED AT91_PIO_PORTC, 12 188 #define CONFIG_GREEN_LED AT91_PIO_PORTC, 13 189 #define CONFIG_YELLOW_LED AT91_PIO_PORTC, 15 190 191 #define CONFIG_BOOTDELAY 3 192 193 /* 194 * BOOTP options 195 */ 196 #define CONFIG_BOOTP_BOOTFILESIZE 1 197 #define CONFIG_BOOTP_BOOTPATH 1 198 #define CONFIG_BOOTP_GATEWAY 1 199 #define CONFIG_BOOTP_HOSTNAME 1 200 201 /* 202 * Command line configuration. 203 */ 204 #include <config_cmd_default.h> 205 #undef CONFIG_CMD_BDI 206 #undef CONFIG_CMD_IMI 207 #undef CONFIG_CMD_FPGA 208 #undef CONFIG_CMD_LOADS 209 #undef CONFIG_CMD_IMLS 210 211 #define CONFIG_CMD_CACHE 212 #define CONFIG_CMD_PING 1 213 #define CONFIG_CMD_DHCP 1 214 #define CONFIG_CMD_NAND 1 215 #define CONFIG_CMD_USB 1 216 217 /* SDRAM */ 218 #define CONFIG_NR_DRAM_BANKS 1 219 #define PHYS_SDRAM 0x20000000 220 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 221 222 /* DataFlash */ 223 #define CONFIG_ATMEL_DATAFLASH_SPI 224 #define CONFIG_HAS_DATAFLASH 225 #define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) 226 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 227 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 228 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ 229 #define AT91_SPI_CLK 15000000 230 #define DATAFLASH_TCSS (0x1a << 16) 231 #define DATAFLASH_TCHS (0x1 << 24) 232 233 /* NAND flash */ 234 #define CONFIG_NAND_ATMEL 235 #define CONFIG_SYS_MAX_NAND_DEVICE 1 236 #define CONFIG_SYS_NAND_BASE 0x40000000 237 #define CONFIG_SYS_NAND_DBW_8 1 238 /* our ALE is AD22 */ 239 #define CONFIG_SYS_NAND_MASK_ALE (1 << 22) 240 /* our CLE is AD21 */ 241 #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) 242 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 243 #define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 16 244 245 /* NOR flash */ 246 #define CONFIG_SYS_FLASH_CFI 1 247 #define CONFIG_FLASH_CFI_DRIVER 1 248 #define PHYS_FLASH_1 0x10000000 249 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 250 #define CONFIG_SYS_MAX_FLASH_SECT 256 251 #define CONFIG_SYS_MAX_FLASH_BANKS 1 252 253 /* Ethernet */ 254 #define CONFIG_DRIVER_DM9000 1 255 #define CONFIG_DM9000_BASE 0x30000000 256 #define DM9000_IO CONFIG_DM9000_BASE 257 #define DM9000_DATA (CONFIG_DM9000_BASE + 4) 258 #define CONFIG_DM9000_USE_16BIT 1 259 #define CONFIG_NET_RETRY_COUNT 20 260 #define CONFIG_RESET_PHY_R 1 261 262 /* USB */ 263 #define CONFIG_USB_ATMEL 264 #define CONFIG_USB_OHCI_NEW 1 265 #define CONFIG_DOS_PARTITION 1 266 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 267 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 268 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" 269 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 270 #define CONFIG_USB_STORAGE 1 271 272 #define CONFIG_SYS_LOAD_ADDR 0x22000000 273 274 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 275 #define CONFIG_SYS_MEMTEST_END 0x23e00000 276 277 #undef CONFIG_SYS_USE_DATAFLASH_CS0 278 #undef CONFIG_SYS_USE_NANDFLASH 279 #define CONFIG_SYS_USE_FLASH 1 280 281 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 282 283 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 284 #define CONFIG_ENV_IS_IN_DATAFLASH 1 285 #define CONFIG_SYS_MONITOR_BASE \ 286 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 287 #define CONFIG_ENV_OFFSET 0x4200 288 #define CONFIG_ENV_ADDR \ 289 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 290 #define CONFIG_ENV_SIZE 0x4200 291 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" 292 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 293 "root=/dev/mtdblock0 " \ 294 "mtdparts=atmel_nand:-(root) " \ 295 "rw rootfstype=jffs2" 296 297 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ 298 299 /* bootstrap + u-boot + env + linux in nandflash */ 300 #define CONFIG_ENV_IS_IN_NAND 1 301 #define CONFIG_ENV_OFFSET 0x60000 302 #define CONFIG_ENV_OFFSET_REDUND 0x80000 303 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 304 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 305 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 306 "root=/dev/mtdblock5 " \ 307 "mtdparts=atmel_nand:128k(bootstrap)ro," \ 308 "256k(uboot)ro,128k(env1)ro," \ 309 "128k(env2)ro,2M(linux),-(root) " \ 310 "rw rootfstype=jffs2" 311 312 #elif defined (CONFIG_SYS_USE_FLASH) 313 314 #define CONFIG_ENV_IS_IN_FLASH 1 315 #define CONFIG_ENV_OFFSET 0x40000 316 #define CONFIG_ENV_SECT_SIZE 0x10000 317 #define CONFIG_ENV_SIZE 0x10000 318 #define CONFIG_ENV_OVERWRITE 1 319 320 /* JFFS Partition offset set */ 321 #define CONFIG_SYS_JFFS2_FIRST_BANK 0 322 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 323 324 /* 512k reserved for u-boot */ 325 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 326 327 #define CONFIG_BOOTCOMMAND "run flashboot" 328 329 #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" 330 #define MTDPARTS_DEFAULT \ 331 "mtdparts=physmap-flash.0:" \ 332 "256k(u-boot)ro," \ 333 "64k(u-boot-env)ro," \ 334 "1408k(kernel)," \ 335 "-(rootfs);" \ 336 "nand:-(nand)" 337 338 #define CONFIG_CON_ROT "fbcon=rotate:3 " 339 #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT 340 341 #define CONFIG_EXTRA_ENV_SETTINGS \ 342 "mtdids=" MTDIDS_DEFAULT "\0" \ 343 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 344 "partition=nand0,0\0" \ 345 "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ 346 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 347 CONFIG_CON_ROT \ 348 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ 349 "addip=setenv bootargs $(bootargs) " \ 350 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ 351 ":$(hostname):eth0:off\0" \ 352 "ramboot=tftpboot 0x22000000 vmImage;" \ 353 "run ramargs;run addip;bootm 22000000\0" \ 354 "nfsboot=tftpboot 0x22000000 vmImage;" \ 355 "run nfsargs;run addip;bootm 22000000\0" \ 356 "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ 357 "" 358 #else 359 #error "Undefined memory device" 360 #endif 361 362 #define CONFIG_BAUDRATE 115200 363 364 #define CONFIG_SYS_PROMPT "pm9261> " 365 #define CONFIG_SYS_CBSIZE 256 366 #define CONFIG_SYS_MAXARGS 16 367 #define CONFIG_SYS_PBSIZE \ 368 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 369 #define CONFIG_SYS_LONGHELP 1 370 #define CONFIG_CMDLINE_EDITING 1 371 372 /* 373 * Size of malloc() pool 374 */ 375 #define CONFIG_SYS_MALLOC_LEN \ 376 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) 377 378 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 379 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 380 GENERATED_GBL_DATA_SIZE) 381 382 #endif 383