1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2007-2008 4 * Stelian Pop <stelian@popies.net> 5 * Lead Tech Design <www.leadtechdesign.com> 6 * Ilko Iliev <www.ronetix.at> 7 * 8 * Configuation settings for the RONETIX PM9261 board. 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * SoC must be defined first, before hardware.h is included. 16 * In this case SoC is defined in boards.cfg. 17 */ 18 19 #include <asm/hardware.h> 20 /* ARM asynchronous clock */ 21 22 #define MASTER_PLL_DIV 15 23 #define MASTER_PLL_MUL 162 24 #define MAIN_PLL_DIV 2 25 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 26 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 27 28 #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" 29 #define CONFIG_ARCH_CPU_INIT 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_PM9261 32 33 /* clocks */ 34 /* CKGR_MOR - enable main osc. */ 35 #define CONFIG_SYS_MOR_VAL \ 36 (AT91_PMC_MOR_MOSCEN | \ 37 (255 << 8)) /* Main Oscillator Start-up Time */ 38 #define CONFIG_SYS_PLLAR_VAL \ 39 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ 40 AT91_PMC_PLLXR_OUT(3) | \ 41 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) 42 43 /* PCK/2 = MCK Master Clock from PLLA */ 44 #define CONFIG_SYS_MCKR1_VAL \ 45 (AT91_PMC_MCKR_CSS_SLOW | \ 46 AT91_PMC_MCKR_PRES_1 | \ 47 AT91_PMC_MCKR_MDIV_2) 48 49 /* PCK/2 = MCK Master Clock from PLLA */ 50 #define CONFIG_SYS_MCKR2_VAL \ 51 (AT91_PMC_MCKR_CSS_PLLA | \ 52 AT91_PMC_MCKR_PRES_1 | \ 53 AT91_PMC_MCKR_MDIV_2) 54 55 /* define PDC[31:16] as DATA[31:16] */ 56 #define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 57 /* no pull-up for D[31:16] */ 58 #define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 59 60 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ 61 #define CONFIG_SYS_MATRIX_EBICSA_VAL \ 62 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) 63 64 /* SDRAM */ 65 /* SDRAMC_MR Mode register */ 66 #define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL 67 /* SDRAMC_TR - Refresh Timer register */ 68 #define CONFIG_SYS_SDRC_TR_VAL1 0x13C 69 /* SDRAMC_CR - Configuration register*/ 70 #define CONFIG_SYS_SDRC_CR_VAL \ 71 (AT91_SDRAMC_NC_9 | \ 72 AT91_SDRAMC_NR_13 | \ 73 AT91_SDRAMC_NB_4 | \ 74 AT91_SDRAMC_CAS_3 | \ 75 AT91_SDRAMC_DBW_32 | \ 76 (1 << 8) | /* Write Recovery Delay */ \ 77 (7 << 12) | /* Row Cycle Delay */ \ 78 (3 << 16) | /* Row Precharge Delay */ \ 79 (2 << 20) | /* Row to Column Delay */ \ 80 (5 << 24) | /* Active to Precharge Delay */ \ 81 (1 << 28)) /* Exit Self Refresh to Active Delay */ 82 83 /* Memory Device Register -> SDRAM */ 84 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 85 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 86 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 87 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 88 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 89 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 90 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 91 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 92 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 93 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 94 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 95 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 96 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 97 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 98 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 99 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 100 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 101 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 102 103 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 104 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 105 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 106 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 107 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 108 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 109 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 110 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 111 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 112 #define CONFIG_SYS_SMC0_MODE0_VAL \ 113 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 114 AT91_SMC_MODE_DBW_16 | \ 115 AT91_SMC_MODE_TDF | \ 116 AT91_SMC_MODE_TDF_CYCLE(6)) 117 118 /* user reset enable */ 119 #define CONFIG_SYS_RSTC_RMR_VAL \ 120 (AT91_RSTC_KEY | \ 121 AT91_RSTC_CR_PROCRST | \ 122 AT91_RSTC_MR_ERSTL(1) | \ 123 AT91_RSTC_MR_ERSTL(2)) 124 125 /* Disable Watchdog */ 126 #define CONFIG_SYS_WDTC_WDMR_VAL \ 127 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 128 AT91_WDT_MR_WDV(0xfff) | \ 129 AT91_WDT_MR_WDDIS | \ 130 AT91_WDT_MR_WDD(0xfff)) 131 132 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 133 #define CONFIG_SETUP_MEMORY_TAGS 1 134 #define CONFIG_INITRD_TAG 1 135 136 #undef CONFIG_SKIP_LOWLEVEL_INIT 137 138 /* 139 * Hardware drivers 140 */ 141 142 /* LCD */ 143 #define LCD_BPP LCD_COLOR8 144 #define CONFIG_LCD_LOGO 1 145 #undef LCD_TEST_PATTERN 146 #define CONFIG_LCD_INFO 1 147 #define CONFIG_LCD_INFO_BELOW_LOGO 1 148 #define CONFIG_ATMEL_LCD 1 149 #define CONFIG_ATMEL_LCD_BGR555 1 150 151 /* 152 * BOOTP options 153 */ 154 #define CONFIG_BOOTP_BOOTFILESIZE 1 155 156 /* SDRAM */ 157 #define PHYS_SDRAM 0x20000000 158 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 159 160 /* NAND flash */ 161 #define CONFIG_SYS_MAX_NAND_DEVICE 1 162 #define CONFIG_SYS_NAND_BASE 0x40000000 163 #define CONFIG_SYS_NAND_DBW_8 1 164 /* our ALE is AD22 */ 165 #define CONFIG_SYS_NAND_MASK_ALE (1 << 22) 166 /* our CLE is AD21 */ 167 #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) 168 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 169 #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16) 170 171 /* NOR flash */ 172 #define CONFIG_SYS_FLASH_CFI 1 173 #define CONFIG_FLASH_CFI_DRIVER 1 174 #define PHYS_FLASH_1 0x10000000 175 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 176 #define CONFIG_SYS_MAX_FLASH_SECT 256 177 #define CONFIG_SYS_MAX_FLASH_BANKS 1 178 179 /* Ethernet */ 180 #define CONFIG_DRIVER_DM9000 1 181 #define CONFIG_DM9000_BASE 0x30000000 182 #define DM9000_IO CONFIG_DM9000_BASE 183 #define DM9000_DATA (CONFIG_DM9000_BASE + 4) 184 #define CONFIG_DM9000_USE_16BIT 1 185 #define CONFIG_NET_RETRY_COUNT 20 186 #define CONFIG_RESET_PHY_R 1 187 188 /* USB */ 189 #define CONFIG_USB_ATMEL 190 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 191 #define CONFIG_USB_OHCI_NEW 1 192 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 193 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 194 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" 195 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 196 197 #define CONFIG_SYS_LOAD_ADDR 0x22000000 198 199 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 200 #define CONFIG_SYS_MEMTEST_END 0x23e00000 201 202 #undef CONFIG_SYS_USE_DATAFLASH_CS0 203 #undef CONFIG_SYS_USE_NANDFLASH 204 #define CONFIG_SYS_USE_FLASH 1 205 206 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 207 208 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 209 #define CONFIG_ENV_OFFSET 0x4200 210 #define CONFIG_ENV_SIZE 0x4200 211 #define CONFIG_ENV_SECT_SIZE 0x210 212 #define CONFIG_ENV_SPI_MAX_HZ 15000000 213 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ 214 "sf read 0x22000000 0x84000 0x210000; " \ 215 "bootm 0x22000000" 216 217 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ 218 219 /* bootstrap + u-boot + env + linux in nandflash */ 220 #define CONFIG_ENV_OFFSET 0x60000 221 #define CONFIG_ENV_OFFSET_REDUND 0x80000 222 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 223 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 224 225 #elif defined (CONFIG_SYS_USE_FLASH) 226 227 #define CONFIG_ENV_OFFSET 0x40000 228 #define CONFIG_ENV_SECT_SIZE 0x10000 229 #define CONFIG_ENV_SIZE 0x10000 230 #define CONFIG_ENV_OVERWRITE 1 231 232 /* JFFS Partition offset set */ 233 #define CONFIG_SYS_JFFS2_FIRST_BANK 0 234 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 235 236 /* 512k reserved for u-boot */ 237 #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 238 239 #define CONFIG_BOOTCOMMAND "run flashboot" 240 241 #define CONFIG_CON_ROT "fbcon=rotate:3 " 242 243 #define CONFIG_EXTRA_ENV_SETTINGS \ 244 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 245 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 246 "partition=nand0,0\0" \ 247 "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ 248 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 249 CONFIG_CON_ROT \ 250 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ 251 "addip=setenv bootargs $(bootargs) " \ 252 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ 253 ":$(hostname):eth0:off\0" \ 254 "ramboot=tftpboot 0x22000000 vmImage;" \ 255 "run ramargs;run addip;bootm 22000000\0" \ 256 "nfsboot=tftpboot 0x22000000 vmImage;" \ 257 "run nfsargs;run addip;bootm 22000000\0" \ 258 "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ 259 "" 260 #else 261 #error "Undefined memory device" 262 #endif 263 264 /* 265 * Size of malloc() pool 266 */ 267 #define CONFIG_SYS_MALLOC_LEN \ 268 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) 269 270 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 271 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ 272 GENERATED_GBL_DATA_SIZE) 273 274 #endif 275