xref: /openbmc/u-boot/include/configs/platinum.h (revision ae485b54)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2014, Barco (www.barco.com)
4  */
5 
6 #ifndef __PLATINUM_CONFIG_H__
7 #define __PLATINUM_CONFIG_H__
8 
9 /* SPL */
10 
11 /* Location in NAND to read U-Boot from */
12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
13 
14 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
15 #include "mx6_common.h"
16 
17 /*
18  * Hardware configuration
19  */
20 
21 /* UART config */
22 #define CONFIG_MXC_UART
23 #define CONFIG_MXC_UART_BASE			UART1_BASE
24 
25 /* I2C config */
26 #define CONFIG_SYS_I2C
27 #define CONFIG_SYS_I2C_MXC
28 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
29 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
30 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
31 #define CONFIG_SYS_I2C_SPEED			100000
32 
33 /* MMC config */
34 #define CONFIG_SYS_FSL_ESDHC_ADDR		0
35 #define CONFIG_SYS_FSL_USDHC_NUM		1
36 
37 /* Ethernet config */
38 #define CONFIG_FEC_MXC
39 #define CONFIG_MII
40 #define IMX_FEC_BASE				ENET_BASE_ADDR
41 
42 /* USB config */
43 #define CONFIG_MXC_USB_PORT			1
44 #define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
45 #define CONFIG_MXC_USB_FLAGS			0
46 
47 /* Memory config */
48 #define CONFIG_NR_DRAM_BANKS			1
49 #define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
50 #ifndef PHYS_SDRAM_SIZE
51 #define PHYS_SDRAM_SIZE				(1024 << 20)
52 #endif
53 
54 #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
55 #define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
56 #define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
57 
58 #define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
59 						 GENERATED_GBL_DATA_SIZE)
60 #define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
61 						 CONFIG_SYS_INIT_SP_OFFSET)
62 
63 #define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)
64 
65 #ifdef CONFIG_CMD_NAND
66 
67 /* NAND config */
68 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
69 #define CONFIG_SYS_NAND_MAX_CHIPS		2
70 #endif
71 #define CONFIG_SYS_MAX_NAND_DEVICE		1
72 #define CONFIG_SYS_NAND_BASE			0x40000000
73 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
74 #define CONFIG_SYS_NAND_ONFI_DETECTION
75 
76 /* DMA config, needed for GPMI/MXS NAND support */
77 
78 /* Environment in NAND */
79 #define CONFIG_ENV_OFFSET		(16 << 20)
80 #define CONFIG_ENV_SECT_SIZE		(128 << 10)
81 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
82 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
83 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
84 
85 #else /* CONFIG_CMD_NAND */
86 
87 /* Environment in MMC */
88 #define CONFIG_ENV_SIZE			(8 << 10)
89 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
90 #define CONFIG_SYS_MMC_ENV_DEV		0
91 
92 #endif /* CONFIG_CMD_NAND */
93 
94 /*
95  * U-Boot configuration
96  */
97 
98 /* Board startup config */
99 #define CONFIG_MISC_INIT_R
100 
101 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
102 #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
103 						 PHYS_SDRAM_SIZE - (12 << 20))
104 
105 #define CONFIG_BOOTCOMMAND			"run bootubi_scr"
106 
107 /* Miscellaneous configurable options */
108 #define CONFIG_PREBOOT
109 
110 /* MTD/UBI/UBIFS config */
111 #define CONFIG_MTD_DEVICE
112 #define CONFIG_MTD_PARTITIONS
113 
114 /*
115  * Environment configuration
116  */
117 
118 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
119 #define CONFIG_COMMON_ENV_UBI						\
120 	"setubipartition=env set ubipartition ubi\0"			\
121 	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
122 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
123 #define CONFIG_COMMON_ENV_UBI						\
124 	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
125 	"setubirfs=env set ubirfs ubi0:rootfs\0"
126 #endif
127 
128 #define CONFIG_COMMON_ENV_MISC						\
129 	"user=user\0"							\
130 	"project="CONFIG_PLATINUM_PROJECT"\0"				\
131 	"uimage=uImage\0"						\
132 	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
133 	"serverip=serverip\0"						\
134 	"memaddrlinux=0x10800000\0"					\
135 	"memaddrsrc=0x11000000\0"					\
136 	"memaddrdtb=0x12000000\0"					\
137 	"console=ttymxc0\0"						\
138 	"baudrate=115200\0"						\
139 	"boot_scr=boot.uboot\0"						\
140 	"boot_vol=0\0"							\
141 	"mtdids="CONFIG_MTDIDS_DEFAULT"\0"					\
142 	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"					\
143 	"mmcfs=ext2\0"							\
144 	"mmcrootpart=1\0"						\
145 	\
146 	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
147 	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
148 	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
149 	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
150 	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
151 	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
152 	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
153 	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
154 	\
155 	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
156 	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
157 	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
158 	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
159 	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
160 		"$mmcfilelinux\0"					\
161 	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
162 		"$mmcfiledtb\0"						\
163 	\
164 	"ubipart=ubi part $ubipartition\0"				\
165 	"ubimount=ubifsmount $ubirfs\0"					\
166 	\
167 	"setbootargscommon=env set bootargs $bootargs "			\
168 		"console=$console,$baudrate enable_wait_mode=off\0"	\
169 	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
170 	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
171 	"setbootargsubirfs=env set bootargs $bootargs "			\
172 		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
173 	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
174 		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
175 	"setbootargsmmcrfs=env set bootargs $bootargs "			\
176 		"root=$mmcrootdev rootwait rw\0"			\
177 	\
178 	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
179 		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
180 			"setbootargsnfsrfs;"				\
181 			"run loadtftpkernel loadtftpdtb;"		\
182 			"bootm $memaddrlinux - $memaddrdtb\0"		\
183 	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
184 			"run setubipartition setubirfs;"		\
185 			"run setbootargscommon setbootargsmtd "		\
186 				"setbootargsubirfs;"			\
187 			"run loadtftpkernel loadtftpdtb;"		\
188 			"bootm $memaddrlinux - $memaddrdtb\0"		\
189 	"bootubi=run setubipartition setubirfs setubifilelinux "	\
190 				"setubipfiledtb;"			\
191 			"run setbootargscommon setbootargsmtd "		\
192 				"setbootargsubirfs;"			\
193 			"run ubipart ubimount loadubikernel loadubidtb;" \
194 			"bootm $memaddrlinux - $memaddrdtb\0"		\
195 	"bootubi_scr=run setubipartition setubirfs;"			\
196 			"run ubipart ubimount;"				\
197 			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
198 			"then source ${memaddrsrc}; else run bootubi; fi\0" \
199 	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
200 			"setbootargscommon setbootargsmmcrfs;"		\
201 			"run loadmmckernel loadmmcdtb;"			\
202 			"bootm $memaddrlinux - $memaddrdtb\0"		\
203 	\
204 	"bootcmd="CONFIG_BOOTCOMMAND"\0"
205 
206 #define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
207 							CONFIG_COMMON_ENV_UBI
208 #endif /* __PLATINUM_CONFIG_H__ */
209