1 /* 2 * Copyright (C) 2014, Barco (www.barco.com) 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __PLATINUM_CONFIG_H__ 8 #define __PLATINUM_CONFIG_H__ 9 10 /* SPL */ 11 12 /* Location in NAND to read U-Boot from */ 13 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) 14 15 #include "imx6_spl.h" /* common IMX6 SPL configuration */ 16 #include "mx6_common.h" 17 18 /* 19 * Hardware configuration 20 */ 21 22 /* UART config */ 23 #define CONFIG_MXC_UART 24 #define CONFIG_MXC_UART_BASE UART1_BASE 25 26 /* I2C config */ 27 #define CONFIG_SYS_I2C 28 #define CONFIG_SYS_I2C_MXC 29 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 30 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 31 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 32 #define CONFIG_SYS_I2C_SPEED 100000 33 34 /* MMC config */ 35 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 36 #define CONFIG_SYS_FSL_USDHC_NUM 1 37 38 /* Ethernet config */ 39 #define CONFIG_FEC_MXC 40 #define CONFIG_MII 41 #define IMX_FEC_BASE ENET_BASE_ADDR 42 43 /* USB config */ 44 #define CONFIG_MXC_USB_PORT 1 45 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 46 #define CONFIG_MXC_USB_FLAGS 0 47 48 /* Memory config */ 49 #define CONFIG_NR_DRAM_BANKS 1 50 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 51 #ifndef PHYS_SDRAM_SIZE 52 #define PHYS_SDRAM_SIZE (1024 << 20) 53 #endif 54 55 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 56 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 57 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 58 59 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 60 GENERATED_GBL_DATA_SIZE) 61 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 62 CONFIG_SYS_INIT_SP_OFFSET) 63 64 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 65 66 #ifdef CONFIG_CMD_NAND 67 68 /* NAND config */ 69 #define CONFIG_NAND_MXS 70 #ifndef CONFIG_SYS_NAND_MAX_CHIPS 71 #define CONFIG_SYS_NAND_MAX_CHIPS 2 72 #endif 73 #define CONFIG_SYS_MAX_NAND_DEVICE 1 74 #define CONFIG_SYS_NAND_BASE 0x40000000 75 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 76 #define CONFIG_SYS_NAND_ONFI_DETECTION 77 78 /* DMA config, needed for GPMI/MXS NAND support */ 79 #define CONFIG_APBH_DMA 80 #define CONFIG_APBH_DMA_BURST 81 #define CONFIG_APBH_DMA_BURST8 82 83 /* Environment in NAND */ 84 #define CONFIG_ENV_OFFSET (16 << 20) 85 #define CONFIG_ENV_SECT_SIZE (128 << 10) 86 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 87 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) 88 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 89 90 #else /* CONFIG_CMD_NAND */ 91 92 /* Environment in MMC */ 93 #define CONFIG_ENV_SIZE (8 << 10) 94 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 95 #define CONFIG_SYS_MMC_ENV_DEV 0 96 97 #endif /* CONFIG_CMD_NAND */ 98 99 /* 100 * U-Boot configuration 101 */ 102 103 /* Board startup config */ 104 #define CONFIG_MISC_INIT_R 105 106 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 107 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 108 PHYS_SDRAM_SIZE - (12 << 20)) 109 110 #define CONFIG_BOOTCOMMAND "run bootubi_scr" 111 112 /* Miscellaneous configurable options */ 113 #define CONFIG_PREBOOT 114 115 /* Print Buffer Size */ 116 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 117 sizeof(CONFIG_SYS_PROMPT) + 16) 118 119 /* MTD/UBI/UBIFS config */ 120 #define CONFIG_MTD_DEVICE 121 #define CONFIG_MTD_PARTITIONS 122 123 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1) 124 #define MTDIDS_DEFAULT "nand0=gpmi-nand" 125 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ 126 "512k(env1),512k(env2),-(ubi)" 127 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) 128 #define MTDIDS_DEFAULT "nand0=gpmi-nand" 129 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ 130 "512k(env1),512k(env2),495M(ubi0)," \ 131 "14M(res0),2M(res1)," \ 132 "512k(res2),512k(res3),-(ubi1)" 133 #endif 134 135 /* 136 * Environment configuration 137 */ 138 139 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1) 140 #define CONFIG_COMMON_ENV_UBI \ 141 "setubipartition=env set ubipartition ubi\0" \ 142 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0" 143 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) 144 #define CONFIG_COMMON_ENV_UBI \ 145 "setubipartition=env set ubipartition ubi$boot_vol\0" \ 146 "setubirfs=env set ubirfs ubi0:rootfs\0" 147 #endif 148 149 #define CONFIG_COMMON_ENV_MISC \ 150 "user=user\0" \ 151 "project="CONFIG_PLATINUM_PROJECT"\0" \ 152 "uimage=uImage\0" \ 153 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \ 154 "serverip=serverip\0" \ 155 "memaddrlinux=0x10800000\0" \ 156 "memaddrsrc=0x11000000\0" \ 157 "memaddrdtb=0x12000000\0" \ 158 "console=ttymxc0\0" \ 159 "baudrate=115200\0" \ 160 "boot_scr=boot.uboot\0" \ 161 "boot_vol=0\0" \ 162 "mtdids="MTDIDS_DEFAULT"\0" \ 163 "mtdparts="MTDPARTS_DEFAULT"\0" \ 164 "mmcfs=ext2\0" \ 165 "mmcrootpart=1\0" \ 166 \ 167 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \ 168 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \ 169 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \ 170 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \ 171 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \ 172 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \ 173 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \ 174 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \ 175 \ 176 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \ 177 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \ 178 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \ 179 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \ 180 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \ 181 "$mmcfilelinux\0" \ 182 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \ 183 "$mmcfiledtb\0" \ 184 \ 185 "ubipart=ubi part $ubipartition\0" \ 186 "ubimount=ubifsmount $ubirfs\0" \ 187 \ 188 "setbootargscommon=env set bootargs $bootargs " \ 189 "console=$console,$baudrate enable_wait_mode=off\0" \ 190 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \ 191 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \ 192 "setbootargsubirfs=env set bootargs $bootargs " \ 193 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \ 194 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \ 195 "nfsroot=$serverip:$nfspath,v3,tcp\0" \ 196 "setbootargsmmcrfs=env set bootargs $bootargs " \ 197 "root=$mmcrootdev rootwait rw\0" \ 198 \ 199 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \ 200 "setbootargscommon setbootargsmtd setbootargsdhcp " \ 201 "setbootargsnfsrfs;" \ 202 "run loadtftpkernel loadtftpdtb;" \ 203 "bootm $memaddrlinux - $memaddrdtb\0" \ 204 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \ 205 "run setubipartition setubirfs;" \ 206 "run setbootargscommon setbootargsmtd " \ 207 "setbootargsubirfs;" \ 208 "run loadtftpkernel loadtftpdtb;" \ 209 "bootm $memaddrlinux - $memaddrdtb\0" \ 210 "bootubi=run setubipartition setubirfs setubifilelinux " \ 211 "setubipfiledtb;" \ 212 "run setbootargscommon setbootargsmtd " \ 213 "setbootargsubirfs;" \ 214 "run ubipart ubimount loadubikernel loadubidtb;" \ 215 "bootm $memaddrlinux - $memaddrdtb\0" \ 216 "bootubi_scr=run setubipartition setubirfs;" \ 217 "run ubipart ubimount;" \ 218 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \ 219 "then source ${memaddrsrc}; else run bootubi; fi\0" \ 220 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \ 221 "setbootargscommon setbootargsmmcrfs;" \ 222 "run loadmmckernel loadmmcdtb;" \ 223 "bootm $memaddrlinux - $memaddrdtb\0" \ 224 \ 225 "bootcmd="CONFIG_BOOTCOMMAND"\0" 226 227 #define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \ 228 CONFIG_COMMON_ENV_UBI 229 #endif /* __PLATINUM_CONFIG_H__ */ 230