xref: /openbmc/u-boot/include/configs/pico-imx7d.h (revision 679590eb)
1 /*
2  * Copyright (C) 2017 NXP Semiconductors
3  *
4  * Configuration settings for the i.MX7D Pico board.
5  *
6  * SPDX-License-Identifier:    GPL-2.0+
7  */
8 
9 #ifndef __PICO_IMX7D_CONFIG_H
10 #define __PICO_IMX7D_CONFIG_H
11 
12 #include "mx7_common.h"
13 
14 #define PHYS_SDRAM_SIZE		SZ_1G
15 
16 /* Size of malloc() pool */
17 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
18 
19 #define CONFIG_MXC_UART_BASE		UART5_IPS_BASE_ADDR
20 
21 /* Network */
22 #define CONFIG_FEC_MXC
23 #define CONFIG_MII
24 #define CONFIG_FEC_XCV_TYPE		RGMII
25 #define CONFIG_ETHPRIME			"FEC"
26 #define CONFIG_FEC_MXC_PHYADDR		1
27 
28 #define CONFIG_PHYLIB
29 #define CONFIG_PHY_ATHEROS
30 
31 /* ENET1 */
32 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
33 
34 /* MMC Config */
35 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
36 
37 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
38 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
39 
40 #define CONFIG_EXTRA_ENV_SETTINGS \
41 	"script=boot.scr\0" \
42 	"image=zImage\0" \
43 	"console=ttymxc4\0" \
44 	"fdt_high=0xffffffff\0" \
45 	"initrd_high=0xffffffff\0" \
46 	"fdt_file=imx7d-pico.dtb\0" \
47 	"fdt_addr=0x83000000\0" \
48 	"ip_dyn=yes\0" \
49 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
50 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
51 	"finduuid=part uuid mmc 0:2 uuid\0" \
52 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
53 		"root=PARTUUID=${uuid} rootwait rw\0" \
54 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
55 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
56 	"mmcboot=echo Booting from mmc ...; " \
57 		"run finduuid; " \
58 		"run mmcargs; " \
59 		"if run loadfdt; then " \
60 			"bootz ${loadaddr} - ${fdt_addr}; " \
61 		"else " \
62 			"echo WARN: Cannot load the DT; " \
63 		"fi;\0" \
64 	"netargs=setenv bootargs console=${console},${baudrate} " \
65 		"root=/dev/nfs " \
66 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
67 		"netboot=echo Booting from net ...; " \
68 		"run netargs; " \
69 		"if test ${ip_dyn} = yes; then " \
70 			"setenv get_cmd dhcp; " \
71 		"else " \
72 			"setenv get_cmd tftp; " \
73 		"fi; " \
74 		"${get_cmd} ${image}; " \
75 		"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
76 			"bootz ${loadaddr} - ${fdt_addr}; " \
77 		"else " \
78 			"echo WARN: Cannot load the DT; " \
79 		"fi;\0"
80 
81 #define CONFIG_BOOTCOMMAND \
82 	"if mmc rescan; then " \
83 		"if run loadimage; then " \
84 			"run mmcboot; " \
85 		"else run netboot; " \
86 		"fi; " \
87 	"else run netboot; fi"
88 
89 #define CONFIG_SYS_MEMTEST_START	0x80000000
90 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
91 
92 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
93 #define CONFIG_SYS_HZ			1000
94 
95 /* Physical Memory Map */
96 #define CONFIG_NR_DRAM_BANKS		1
97 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
98 
99 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
100 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
101 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
102 
103 #define CONFIG_SYS_INIT_SP_OFFSET \
104 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
105 #define CONFIG_SYS_INIT_SP_ADDR \
106 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
107 
108 /* I2C configs */
109 #define CONFIG_SYS_I2C
110 #define CONFIG_SYS_I2C_MXC
111 #define CONFIG_SYS_I2C_MXC_I2C1
112 #define CONFIG_SYS_I2C_MXC_I2C2
113 #define CONFIG_SYS_I2C_MXC_I2C3
114 #define CONFIG_SYS_I2C_MXC_I2C4
115 #define CONFIG_SYS_I2C_SPEED		100000
116 
117 /* PMIC */
118 #define CONFIG_POWER
119 #define CONFIG_POWER_I2C
120 #define CONFIG_POWER_PFUZE3000
121 #define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
122 
123 /* FLASH and environment organization */
124 #define CONFIG_ENV_SIZE			SZ_8K
125 
126 #define CONFIG_ENV_OFFSET			(8 * SZ_64K)
127 #define CONFIG_SYS_FSL_USDHC_NUM		2
128 
129 #define CONFIG_SYS_MMC_ENV_DEV			0
130 #define CONFIG_SYS_MMC_ENV_PART		0
131 
132 /* USB Configs */
133 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
134 #define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
135 #define CONFIG_MXC_USB_FLAGS			0
136 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
137 
138 #define CONFIG_IMX_THERMAL
139 
140 #define CONFIG_USB_FUNCTION_MASS_STORAGE
141 
142 #endif
143