1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2015 Technexion Ltd. 4 * 5 * Configuration settings for the Technexion PICO-IMX6UL-EMMC board. 6 */ 7 #ifndef __PICO_IMX6UL_CONFIG_H 8 #define __PICO_IMX6UL_CONFIG_H 9 10 11 #include <asm/arch/imx-regs.h> 12 #include <linux/sizes.h> 13 #include "mx6_common.h" 14 #include <asm/mach-imx/gpio.h> 15 #include "imx6_spl.h" 16 17 #ifdef CONFIG_SPL_OS_BOOT 18 /* Falcon Mode */ 19 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" 20 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 21 #define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000 22 23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ 24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ 25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) 26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ 27 #endif 28 29 /* Network support */ 30 31 #define CONFIG_FEC_MXC 32 #define IMX_FEC_BASE ENET2_BASE_ADDR 33 #define CONFIG_FEC_MXC_PHYADDR 0x1 34 #define CONFIG_FEC_XCV_TYPE RMII 35 36 /* Size of malloc() pool */ 37 #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ 38 39 #define CONFIG_MXC_UART 40 #define CONFIG_MXC_UART_BASE UART6_BASE_ADDR 41 42 /* MMC Configs */ 43 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR 44 #define CONFIG_SUPPORT_EMMC_BOOT 45 46 /* USB Configs */ 47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 48 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 49 #define CONFIG_MXC_USB_FLAGS 0 50 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 51 52 #define CONFIG_USBD_HS 53 54 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 55 #define DFU_DEFAULT_POLL_TIMEOUT 300 56 57 #define CONFIG_DFU_ENV_SETTINGS \ 58 "dfu_alt_info=" \ 59 "spl raw 0x2 0x400 mmcpart 1;" \ 60 "u-boot raw 0x8a 0x400 mmcpart 1;" \ 61 "/boot/zImage ext4 0 1;" \ 62 "/boot/imx6ul-pico-hobbit.dtb ext4 0 1;" \ 63 "/boot/imx6ul-pico-pi.dtb ext4 0 1;" \ 64 "rootfs part 0 1\0" \ 65 66 #define BOOTMENU_ENV \ 67 "bootmenu_0=Boot using PICO-Hobbit baseboard=" \ 68 "setenv fdtfile imx6ul-pico-hobbit.dtb\0" \ 69 "bootmenu_1=Boot using PICO-Pi baseboard=" \ 70 "setenv fdtfile imx6ul-pico-pi.dtb\0" \ 71 72 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 73 74 #define CONFIG_EXTRA_ENV_SETTINGS \ 75 "script=boot.scr\0" \ 76 "image=zImage\0" \ 77 "console=ttymxc5\0" \ 78 "fdt_high=0xffffffff\0" \ 79 "initrd_high=0xffffffff\0" \ 80 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ 81 BOOTMENU_ENV \ 82 "fdt_addr=0x83000000\0" \ 83 "fdt_addr_r=0x83000000\0" \ 84 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 85 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 86 "ramdisk_addr_r=0x83000000\0" \ 87 "ramdiskaddr=0x83000000\0" \ 88 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 89 "mmcautodetect=yes\0" \ 90 CONFIG_DFU_ENV_SETTINGS \ 91 "findfdt=" \ 92 "if test $fdtfile = ask ; then " \ 93 "bootmenu -1; fi;" \ 94 "if test $fdtfile != ask ; then " \ 95 "saveenv; fi;\0" \ 96 "finduuid=part uuid mmc 0:1 uuid\0" \ 97 "partitions=" \ 98 "uuid_disk=${uuid_gpt_disk};" \ 99 "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ 100 "fastboot_partition_alias_system=rootfs\0" \ 101 "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ 102 BOOTENV 103 104 #define BOOT_TARGET_DEVICES(func) \ 105 func(MMC, mmc, 0) \ 106 func(DHCP, dhcp, na) 107 108 #include <config_distro_bootcmd.h> 109 110 #define CONFIG_SYS_MEMTEST_START 0x80000000 111 #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M 112 113 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 114 #define CONFIG_SYS_HZ 1000 115 116 /* Physical Memory Map */ 117 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 118 119 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 120 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 121 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 122 123 #define CONFIG_SYS_INIT_SP_OFFSET \ 124 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 125 #define CONFIG_SYS_INIT_SP_ADDR \ 126 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 127 128 /* I2C configs */ 129 #define CONFIG_SYS_I2C 130 #define CONFIG_SYS_I2C_MXC 131 #define CONFIG_SYS_I2C_MXC_I2C1 132 #define CONFIG_SYS_I2C_SPEED 100000 133 134 /* PMIC */ 135 #define CONFIG_POWER 136 #define CONFIG_POWER_I2C 137 #define CONFIG_POWER_PFUZE3000 138 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 139 140 /* environment organization */ 141 #define CONFIG_ENV_SIZE SZ_8K 142 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 143 144 #define CONFIG_SYS_MMC_ENV_DEV 0 145 #define CONFIG_SYS_MMC_ENV_PART 0 146 147 #endif /* __PICO_IMX6UL_CONFIG_H */ 148