1 /* 2 * Copyright (C) 2015 Technexion Ltd. 3 * 4 * Configuration settings for the Technexion PICO-IMX6UL-EMMC board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __PICO_IMX6UL_CONFIG_H 9 #define __PICO_IMX6UL_CONFIG_H 10 11 12 #include <asm/arch/imx-regs.h> 13 #include <linux/sizes.h> 14 #include "mx6_common.h" 15 #include <asm/imx-common/gpio.h> 16 17 /* Network support */ 18 19 #define CONFIG_FEC_MXC 20 #define CONFIG_MII 21 #define IMX_FEC_BASE ENET2_BASE_ADDR 22 #define CONFIG_FEC_MXC_PHYADDR 0x1 23 #define CONFIG_FEC_XCV_TYPE RMII 24 #define CONFIG_PHYLIB 25 #define CONFIG_PHY_MICREL 26 27 /* Size of malloc() pool */ 28 #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ 29 30 #define CONFIG_MXC_UART 31 #define CONFIG_MXC_UART_BASE UART6_BASE_ADDR 32 33 /* MMC Configs */ 34 #define CONFIG_FSL_USDHC 35 #define CONFIG_FSL_ESDHC 36 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR 37 38 #define CONFIG_GENERIC_MMC 39 #define CONFIG_SUPPORT_EMMC_BOOT 40 41 /* USB Configs */ 42 #define CONFIG_USB_EHCI 43 #define CONFIG_USB_EHCI_MX6 44 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 45 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 46 #define CONFIG_MXC_USB_FLAGS 0 47 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 48 49 #define CONFIG_USBD_HS 50 51 #define CONFIG_USB_FUNCTION_MASS_STORAGE 52 #define CONFIG_USB_GADGET_VBUS_DRAW 2 53 54 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 55 #define DFU_DEFAULT_POLL_TIMEOUT 300 56 57 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 58 59 #define CONFIG_EXTRA_ENV_SETTINGS \ 60 "image=zImage\0" \ 61 "console=ttymxc5\0" \ 62 "fdt_high=0xffffffff\0" \ 63 "initrd_high=0xffffffff\0" \ 64 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ 65 "fdt_addr=0x83000000\0" \ 66 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 67 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 68 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 69 "mmcautodetect=yes\0" \ 70 "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \ 71 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 72 "root=${mmcroot}\0" \ 73 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 74 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 75 "mmcboot=echo Booting from mmc ...; " \ 76 "run mmcargs; " \ 77 "if run loadfdt; then " \ 78 "bootz ${loadaddr} - ${fdt_addr}; " \ 79 "else " \ 80 "echo WARN: Cannot load the DT; " \ 81 "fi;\0" \ 82 "netargs=setenv bootargs console=${console},${baudrate} " \ 83 "root=/dev/nfs " \ 84 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 85 "netboot=echo Booting from net ...; " \ 86 "run netargs; " \ 87 "if test ${ip_dyn} = yes; then " \ 88 "setenv get_cmd dhcp; " \ 89 "else " \ 90 "setenv get_cmd tftp; " \ 91 "fi; " \ 92 "${get_cmd} ${image}; " \ 93 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 94 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 95 "bootz ${loadaddr} - ${fdt_addr}; " \ 96 "else " \ 97 "if test ${boot_fdt} = try; then " \ 98 "bootz; " \ 99 "else " \ 100 "echo WARN: Cannot load the DT; " \ 101 "fi; " \ 102 "fi; " \ 103 "else " \ 104 "bootz; " \ 105 "fi;\0" \ 106 107 #define CONFIG_BOOTCOMMAND \ 108 "if mmc rescan; then " \ 109 "if run loadimage; then " \ 110 "run mmcboot; " \ 111 "else run netboot; " \ 112 "fi; " \ 113 "else run netboot; fi" 114 115 #define CONFIG_SYS_MEMTEST_START 0x80000000 116 #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M 117 118 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 119 #define CONFIG_SYS_HZ 1000 120 121 #define CONFIG_CMDLINE_EDITING 122 #define CONFIG_STACKSIZE SZ_128K 123 124 /* Physical Memory Map */ 125 #define CONFIG_NR_DRAM_BANKS 1 126 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 127 128 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 129 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 130 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 131 132 #define CONFIG_SYS_INIT_SP_OFFSET \ 133 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 134 #define CONFIG_SYS_INIT_SP_ADDR \ 135 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 136 137 /* I2C configs */ 138 #define CONFIG_SYS_I2C 139 #define CONFIG_SYS_I2C_MXC 140 #define CONFIG_SYS_I2C_MXC_I2C1 141 #define CONFIG_SYS_I2C_SPEED 100000 142 143 /* PMIC */ 144 #define CONFIG_POWER 145 #define CONFIG_POWER_I2C 146 #define CONFIG_POWER_PFUZE3000 147 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 148 149 /* FLASH and environment organization */ 150 #define CONFIG_SYS_NO_FLASH 151 152 #define CONFIG_ENV_SIZE SZ_8K 153 #define CONFIG_ENV_IS_IN_MMC 154 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 155 156 #define CONFIG_SYS_MMC_ENV_DEV 0 157 #define CONFIG_SYS_MMC_ENV_PART 0 158 #define CONFIG_MMCROOT "/dev/mmcblk0p2" 159 160 #endif /* __PICO_IMX6UL_CONFIG_H */ 161