1 /* 2 * Copyright (C) 2015 Technexion Ltd. 3 * 4 * Configuration settings for the Technexion PICO-IMX6UL-EMMC board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __PICO_IMX6UL_CONFIG_H 9 #define __PICO_IMX6UL_CONFIG_H 10 11 12 #include <asm/arch/imx-regs.h> 13 #include <linux/sizes.h> 14 #include "mx6_common.h" 15 #include <asm/mach-imx/gpio.h> 16 17 /* Network support */ 18 19 #define CONFIG_FEC_MXC 20 #define CONFIG_MII 21 #define IMX_FEC_BASE ENET2_BASE_ADDR 22 #define CONFIG_FEC_MXC_PHYADDR 0x1 23 #define CONFIG_FEC_XCV_TYPE RMII 24 25 /* Size of malloc() pool */ 26 #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ 27 28 #define CONFIG_MXC_UART 29 #define CONFIG_MXC_UART_BASE UART6_BASE_ADDR 30 31 /* MMC Configs */ 32 #define CONFIG_FSL_USDHC 33 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR 34 #define CONFIG_SUPPORT_EMMC_BOOT 35 36 /* USB Configs */ 37 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 38 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 39 #define CONFIG_MXC_USB_FLAGS 0 40 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 41 42 #define CONFIG_USBD_HS 43 44 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 45 #define DFU_DEFAULT_POLL_TIMEOUT 300 46 47 #define CONFIG_DFU_ENV_SETTINGS \ 48 "dfu_alt_info=uboot raw 0x2 0x400 mmcpart 1;" \ 49 "boot part 0 1;" \ 50 "/zImage ext4 0 1;" \ 51 "/imx6ul-pico-hobbit.dtb ext4 0 1;" \ 52 "rootfs part 0 2\0" \ 53 54 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 55 56 #define CONFIG_EXTRA_ENV_SETTINGS \ 57 "image=zImage\0" \ 58 "console=ttymxc5\0" \ 59 "fdt_high=0xffffffff\0" \ 60 "initrd_high=0xffffffff\0" \ 61 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ 62 "fdt_addr=0x83000000\0" \ 63 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 64 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 65 "mmcautodetect=yes\0" \ 66 CONFIG_DFU_ENV_SETTINGS \ 67 "finduuid=part uuid mmc 0:2 uuid\0" \ 68 "partitions=" \ 69 "uuid_disk=${uuid_gpt_disk};" \ 70 "name=boot,size=16MiB;name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ 71 "setup_emmc=gpt write mmc 0 $partitions; reset;\0" \ 72 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 73 "root=PARTUUID=${uuid} rootwait rw\0" \ 74 "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 75 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 76 "mmcboot=echo Booting from mmc ...; " \ 77 "run finduuid; " \ 78 "run mmcargs; " \ 79 "if run loadfdt; then " \ 80 "bootz ${loadaddr} - ${fdt_addr}; " \ 81 "else " \ 82 "echo WARN: Cannot load the DT; " \ 83 "fi;\0" \ 84 "netargs=setenv bootargs console=${console},${baudrate} " \ 85 "root=/dev/nfs " \ 86 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 87 "netboot=echo Booting from net ...; " \ 88 "run netargs; " \ 89 "if test ${ip_dyn} = yes; then " \ 90 "setenv get_cmd dhcp; " \ 91 "else " \ 92 "setenv get_cmd tftp; " \ 93 "fi; " \ 94 "${get_cmd} ${image}; " \ 95 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 96 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 97 "bootz ${loadaddr} - ${fdt_addr}; " \ 98 "else " \ 99 "if test ${boot_fdt} = try; then " \ 100 "bootz; " \ 101 "else " \ 102 "echo WARN: Cannot load the DT; " \ 103 "fi; " \ 104 "fi; " \ 105 "else " \ 106 "bootz; " \ 107 "fi;\0" \ 108 109 #define CONFIG_BOOTCOMMAND \ 110 "if mmc rescan; then " \ 111 "if run loadimage; then " \ 112 "run mmcboot; " \ 113 "else run netboot; " \ 114 "fi; " \ 115 "else run netboot; fi" 116 117 #define CONFIG_SYS_MEMTEST_START 0x80000000 118 #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M 119 120 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 121 #define CONFIG_SYS_HZ 1000 122 123 /* Physical Memory Map */ 124 #define CONFIG_NR_DRAM_BANKS 1 125 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 126 127 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 128 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 129 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 130 131 #define CONFIG_SYS_INIT_SP_OFFSET \ 132 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 133 #define CONFIG_SYS_INIT_SP_ADDR \ 134 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 135 136 /* I2C configs */ 137 #define CONFIG_SYS_I2C 138 #define CONFIG_SYS_I2C_MXC 139 #define CONFIG_SYS_I2C_MXC_I2C1 140 #define CONFIG_SYS_I2C_SPEED 100000 141 142 /* PMIC */ 143 #define CONFIG_POWER 144 #define CONFIG_POWER_I2C 145 #define CONFIG_POWER_PFUZE3000 146 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 147 148 /* environment organization */ 149 #define CONFIG_ENV_SIZE SZ_8K 150 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 151 152 #define CONFIG_SYS_MMC_ENV_DEV 0 153 #define CONFIG_SYS_MMC_ENV_PART 0 154 155 #endif /* __PICO_IMX6UL_CONFIG_H */ 156