1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) Stefano Babic <sbabic@denx.de> 4 */ 5 6 7 #ifndef __PCM058_CONFIG_H 8 #define __PCM058_CONFIG_H 9 10 #ifdef CONFIG_SPL 11 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) 12 #include "imx6_spl.h" 13 #endif 14 15 #include "mx6_common.h" 16 17 /* Thermal */ 18 #define CONFIG_IMX_THERMAL 19 20 /* Serial */ 21 #define CONFIG_MXC_UART 22 #define CONFIG_MXC_UART_BASE UART4_BASE 23 #define CONSOLE_DEV "ttymxc3" 24 25 /* Early setup */ 26 27 28 /* Size of malloc() pool */ 29 #define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) 30 31 /* Ethernet */ 32 #define IMX_FEC_BASE ENET_BASE_ADDR 33 #define CONFIG_FEC_XCV_TYPE RGMII 34 #define CONFIG_ETHPRIME "FEC" 35 #define CONFIG_FEC_MXC_PHYADDR 3 36 37 /* SPI Flash */ 38 39 /* I2C Configs */ 40 #define CONFIG_SYS_I2C 41 #define CONFIG_SYS_I2C_MXC 42 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */ 43 #define CONFIG_SYS_I2C_SPEED 100000 44 45 #ifndef CONFIG_SPL_BUILD 46 #define CONFIG_CMD_NAND 47 /* Enable NAND support */ 48 #define CONFIG_CMD_NAND_TRIMFFS 49 #define CONFIG_SYS_MAX_NAND_DEVICE 1 50 #define CONFIG_SYS_NAND_BASE 0x40000000 51 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 52 #define CONFIG_SYS_NAND_ONFI_DETECTION 53 #endif 54 55 /* DMA stuff, needed for GPMI/MXS NAND support */ 56 57 /* Filesystem support */ 58 59 /* Various command support */ 60 61 /* Physical Memory Map */ 62 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 63 64 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 65 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 66 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 67 68 #define CONFIG_SYS_INIT_SP_OFFSET \ 69 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 70 #define CONFIG_SYS_INIT_SP_ADDR \ 71 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 72 73 /* MMC Configs */ 74 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 75 #define CONFIG_SYS_FSL_USDHC_NUM 2 76 77 /* Environment organization */ 78 #define CONFIG_ENV_IS_IN_SPI_FLASH 79 #define CONFIG_ENV_SIZE (16 * 1024) 80 #define CONFIG_ENV_OFFSET (1024 * SZ_1K) 81 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K) 82 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 83 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 84 CONFIG_ENV_SECT_SIZE) 85 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 86 87 #ifdef CONFIG_ENV_IS_IN_NAND 88 #define CONFIG_ENV_OFFSET (0x1E0000) 89 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K) 90 #endif 91 92 /* Default environment */ 93 #define CONFIG_EXTRA_ENV_SETTINGS \ 94 "addcons=setenv bootargs ${bootargs} " \ 95 "console=${console},${baudrate}\0" \ 96 "addip=setenv bootargs ${bootargs} " \ 97 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 98 "${netmask}:${hostname}:${netdev}:off\0" \ 99 "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \ 100 "addmtd=run mtdnand;run mtdspi;" \ 101 "setenv bootargs ${bootargs} ${mtdparts}\0" \ 102 "mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \ 103 "40m(Kernels),400m(root),-(nand)\0" \ 104 "mtdspi=setenv mtdparts ${mtdparts}" \ 105 "';spi2.0:1024k(bootloader)," \ 106 "64k(env1),64k(env2),-(rescue)'\0" \ 107 "bootcmd=if test -n ${rescue};" \ 108 "then run swupdate;fi;run nandboot;run swupdate\0" \ 109 "bootfile=uImage\0" \ 110 "bootimage=uImage\0" \ 111 "console=ttymxc3\0" \ 112 "fdt_addr_r=0x18000000\0" \ 113 "fdt_file=pfla02.dtb\0" \ 114 "fdt_high=0xffffffff\0" \ 115 "initrd_high=0xffffffff\0" \ 116 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 117 "miscargs=panic=1 quiet\0" \ 118 "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \ 119 "mmcboot=if run mmcload;then " \ 120 "run mmcargs addcons addmisc;" \ 121 "bootm;fi\0" \ 122 "mmcload=mmc rescan;" \ 123 "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\ 124 "mmcpart=1\0" \ 125 "mmcroot=/dev/mmcblk0p1\0" \ 126 "ubiroot=1\0" \ 127 "nandargs=setenv bootargs ubi.mtd=1 " \ 128 "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \ 129 "nandboot=run mtdnand;ubi part nand0,0;" \ 130 "ubi readvol ${kernel_addr_r} kernel${ubiroot};" \ 131 "run nandargs addip addcons addmtd addmisc;" \ 132 "bootm ${kernel_addr_r}\0" \ 133 "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \ 134 "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \ 135 "run nfsargs addip addcons addmtd addmisc;" \ 136 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ 137 "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \ 138 "run nfsargs addip addcons addmtd addmisc;" \ 139 "bootm ${kernel_addr_r}\0" \ 140 "nfsargs=setenv bootargs root=/dev/nfs" \ 141 " nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \ 142 "swupdate=setenv bootargs root=/dev/ram;" \ 143 "run addip addcons addmtd addmisc;" \ 144 "sf probe;" \ 145 "sf read ${kernel_addr_r} 120000 600000;" \ 146 "sf read 14000000 730000 800000;" \ 147 "bootm ${kernel_addr_r} 14000000\0" 148 149 #endif 150