1 /* 2 * Copyright (C) Stefano Babic <sbabic@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 8 #ifndef __PCM058_CONFIG_H 9 #define __PCM058_CONFIG_H 10 11 #include <config_distro_defaults.h> 12 13 #ifdef CONFIG_SPL 14 #define CONFIG_SPL_SPI_LOAD 15 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) 16 #include "imx6_spl.h" 17 #endif 18 19 #include "mx6_common.h" 20 21 /* Thermal */ 22 #define CONFIG_IMX_THERMAL 23 24 /* Serial */ 25 #define CONFIG_MXC_UART 26 #define CONFIG_MXC_UART_BASE UART4_BASE 27 #define CONSOLE_DEV "ttymxc3" 28 29 /* Early setup */ 30 #define CONFIG_DISPLAY_BOARDINFO_LATE 31 32 33 /* Size of malloc() pool */ 34 #define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) 35 36 /* Ethernet */ 37 #define CONFIG_MII 38 #define IMX_FEC_BASE ENET_BASE_ADDR 39 #define CONFIG_FEC_XCV_TYPE RGMII 40 #define CONFIG_ETHPRIME "FEC" 41 #define CONFIG_FEC_MXC_PHYADDR 3 42 43 /* SPI Flash */ 44 #define CONFIG_MXC_SPI 45 #define CONFIG_SF_DEFAULT_BUS 2 46 #define CONFIG_SF_DEFAULT_CS 0 47 #define CONFIG_SF_DEFAULT_SPEED 20000000 48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 49 50 /* I2C Configs */ 51 #define CONFIG_SYS_I2C 52 #define CONFIG_SYS_I2C_MXC 53 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */ 54 #define CONFIG_SYS_I2C_SPEED 100000 55 56 #ifndef CONFIG_SPL_BUILD 57 #define CONFIG_CMD_NAND 58 /* Enable NAND support */ 59 #define CONFIG_CMD_NAND_TRIMFFS 60 #define CONFIG_NAND_MXS 61 #define CONFIG_SYS_MAX_NAND_DEVICE 1 62 #define CONFIG_SYS_NAND_BASE 0x40000000 63 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 64 #define CONFIG_SYS_NAND_ONFI_DETECTION 65 #endif 66 67 /* DMA stuff, needed for GPMI/MXS NAND support */ 68 #define CONFIG_APBH_DMA 69 #define CONFIG_APBH_DMA_BURST 70 #define CONFIG_APBH_DMA_BURST8 71 72 /* Filesystem support */ 73 #define CONFIG_MTD_PARTITIONS 74 #define CONFIG_MTD_DEVICE 75 76 /* Various command support */ 77 78 /* Physical Memory Map */ 79 #define CONFIG_NR_DRAM_BANKS 1 80 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 81 82 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 83 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 84 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 85 86 #define CONFIG_SYS_INIT_SP_OFFSET \ 87 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 88 #define CONFIG_SYS_INIT_SP_ADDR \ 89 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 90 91 /* MMC Configs */ 92 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 93 #define CONFIG_SYS_FSL_USDHC_NUM 2 94 95 /* Environment organization */ 96 #define CONFIG_ENV_IS_IN_SPI_FLASH 97 #define CONFIG_ENV_SIZE (16 * 1024) 98 #define CONFIG_ENV_OFFSET (1024 * SZ_1K) 99 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K) 100 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 101 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 102 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 103 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 104 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 105 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 106 CONFIG_ENV_SECT_SIZE) 107 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 108 109 #ifdef CONFIG_ENV_IS_IN_NAND 110 #define CONFIG_ENV_OFFSET (0x1E0000) 111 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K) 112 #endif 113 114 /* Default environment */ 115 #define CONFIG_EXTRA_ENV_SETTINGS \ 116 "addcons=setenv bootargs ${bootargs} " \ 117 "console=${console},${baudrate}\0" \ 118 "addip=setenv bootargs ${bootargs} " \ 119 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 120 "${netmask}:${hostname}:${netdev}:off\0" \ 121 "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \ 122 "addmtd=run mtdnand;run mtdspi;" \ 123 "setenv bootargs ${bootargs} ${mtdparts}\0" \ 124 "mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \ 125 "40m(Kernels),400m(root),-(nand)\0" \ 126 "mtdspi=setenv mtdparts ${mtdparts}" \ 127 "';spi2.0:1024k(bootloader)," \ 128 "64k(env1),64k(env2),-(rescue)'\0" \ 129 "bootcmd=if test -n ${rescue};" \ 130 "then run swupdate;fi;run nandboot;run swupdate\0" \ 131 "bootfile=uImage\0" \ 132 "bootimage=uImage\0" \ 133 "console=ttymxc3\0" \ 134 "fdt_addr_r=0x18000000\0" \ 135 "fdt_file=pfla02.dtb\0" \ 136 "fdt_high=0xffffffff\0" \ 137 "initrd_high=0xffffffff\0" \ 138 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 139 "miscargs=panic=1 quiet\0" \ 140 "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \ 141 "mmcboot=if run mmcload;then " \ 142 "run mmcargs addcons addmisc;" \ 143 "bootm;fi\0" \ 144 "mmcload=mmc rescan;" \ 145 "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\ 146 "mmcpart=1\0" \ 147 "mmcroot=/dev/mmcblk0p1\0" \ 148 "ubiroot=1\0" \ 149 "nandargs=setenv bootargs ubi.mtd=1 " \ 150 "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \ 151 "nandboot=run mtdnand;ubi part nand0,0;" \ 152 "ubi readvol ${kernel_addr_r} kernel${ubiroot};" \ 153 "run nandargs addip addcons addmtd addmisc;" \ 154 "bootm ${kernel_addr_r}\0" \ 155 "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \ 156 "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \ 157 "run nfsargs addip addcons addmtd addmisc;" \ 158 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ 159 "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \ 160 "run nfsargs addip addcons addmtd addmisc;" \ 161 "bootm ${kernel_addr_r}\0" \ 162 "nfsargs=setenv bootargs root=/dev/nfs" \ 163 " nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \ 164 "swupdate=setenv bootargs root=/dev/ram;" \ 165 "run addip addcons addmtd addmisc;" \ 166 "sf probe;" \ 167 "sf read ${kernel_addr_r} 120000 600000;" \ 168 "sf read 14000000 730000 800000;" \ 169 "bootm ${kernel_addr_r} 14000000\0" 170 171 #endif 172