xref: /openbmc/u-boot/include/configs/pengwyn.h (revision 9cb05a8f)
1 /*
2  * pengwyn.h
3  *
4  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
5  *
6  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_PENGWYN_H
12 #define __CONFIG_PENGWYN_H
13 
14 #define CONFIG_NAND
15 #define CONFIG_SERIAL1
16 #define CONFIG_CONS_INDEX		1
17 
18 #include <configs/ti_am335x_common.h>
19 
20 /* Clock Defines */
21 #define V_OSCK				24000000
22 #define V_SCLK				V_OSCK
23 
24 /* set env size */
25 #define CONFIG_ENV_SIZE			0x4000
26 
27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
28 
29 #ifndef CONFIG_SPL_BUILD
30 #define CONFIG_EXTRA_ENV_SETTINGS \
31 	"loadaddr=0x80200000\0" \
32 	"fdtaddr=0x80F80000\0" \
33 	"bootpart=0:2\0" \
34 	"bootdir=/boot\0" \
35 	"bootfile=zImage\0" \
36 	"fdtfile=am335x-pengwyn.dtb\0" \
37 	"console=ttyO0,115200n8\0" \
38 	"optargs=\0" \
39 	"mmcdev=0\0" \
40 	"mmcroot=/dev/mmcblk0p2 ro\0" \
41 	"mmcrootfstype=ext4 rootwait\0" \
42 	"rootpath=/export/rootfs\0" \
43 	"nfsopts=nolock\0" \
44 	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
45 		"::off\0" \
46 	"mmcargs=setenv bootargs console=${console} " \
47 		"${optargs} " \
48 		"root=${mmcroot} " \
49 		"rootfstype=${mmcrootfstype}\0" \
50 	"netargs=setenv bootargs console=${console} " \
51 		"${optargs} " \
52 		"root=/dev/nfs " \
53 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
54 		"ip=dhcp\0" \
55 	"bootenv=uEnv.txt\0" \
56 	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
57 	"importbootenv=echo Importing environment from mmc ...; " \
58 		"env import -t $loadaddr $filesize\0" \
59 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
60 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
61 	"mmcloados=run mmcargs; " \
62 		"bootz ${loadaddr} - ${fdtaddr};\0" \
63 	"mmcboot=mmc dev ${mmcdev}; " \
64 		"if mmc rescan; then " \
65 			"echo SD/MMC found on device ${mmcdev};" \
66 			"if run loadbootenv; then " \
67 				"echo Loaded environment from ${bootenv};" \
68 				"run importbootenv;" \
69 			"fi;" \
70 			"if test -n $uenvcmd; then " \
71 				"echo Running uenvcmd ...;" \
72 				"run uenvcmd;" \
73 			"fi;" \
74 			"if run loadimage; then " \
75 				"run loadfdt;" \
76 				"run mmcloados;" \
77 			"fi;" \
78 		"fi;\0" \
79 	"netboot=echo Booting from network ...; " \
80 		"setenv autoload no; " \
81 		"dhcp; " \
82 		"tftp ${loadaddr} ${bootfile}; " \
83 		"tftp ${fdtaddr} ${fdtfile}; " \
84 		"run netargs; " \
85 		"bootz ${loadaddr} - ${fdtaddr}\0" \
86 	"mtdids=" MTDIDS_DEFAULT "\0" \
87 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
88 	"nandargs=setenv bootargs console=${console} " \
89 		"${optargs} " \
90 		"root=${nandroot} " \
91 		"rootfstype=${nandrootfstype}\0" \
92 	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
93 	"nandrootfstype=ubifs rootwait=1\0" \
94 	"nandboot=echo Booting from nand ...; " \
95 		"run nandargs; " \
96 		"nand read ${fdtaddr} u-boot-spl-os; " \
97 		"nand read ${loadaddr} kernel; " \
98 		"bootz ${loadaddr} - ${fdtaddr}\0"
99 #endif
100 
101 #define CONFIG_BOOTCOMMAND \
102 	"run mmcboot;" \
103 	"run nandboot;"
104 
105 /* NS16550 Configuration: primary UART via FDTI */
106 #define CONFIG_SYS_NS16550_COM1		0x44e09000
107 #define CONFIG_BAUDRATE			115200
108 
109 /* I2C Configuration */
110 #define	CONFIG_SYS_I2C_SPEED		100000
111 #define CONFIG_CMD_EEPROM
112 #define CONFIG_ENV_EEPROM_IS_ON_I2C
113 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
115 
116 /* SPL */
117 #define CONFIG_SPL_POWER_SUPPORT
118 #define CONFIG_SPL_YMODEM_SUPPORT
119 
120 /* General network SPL */
121 #define CONFIG_SPL_NET_SUPPORT
122 #define CONFIG_SPL_ENV_SUPPORT
123 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
124 
125 /* NAND support */
126 #define CONFIG_CMD_NAND
127 #define CONFIG_NAND_OMAP_GPMC
128 #define CONFIG_NAND_OMAP_ELM
129 
130 /* NAND Configuration. */
131 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
132 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
133 					 CONFIG_SYS_NAND_PAGE_SIZE)
134 #define CONFIG_SYS_NAND_PAGE_SIZE	4096
135 #define CONFIG_SYS_NAND_OOBSIZE		224
136 #define CONFIG_SYS_NAND_ONFI_DETECTION
137 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*4096)
138 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
139 #define CONFIG_SYS_NAND_ECCPOS		{   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
140 					   18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
141 					   34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
142 					   50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
143 					   66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
144 					   82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
145 					   98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
146 					  114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
147 					  134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
148 					  154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
149 					  174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
150 					  194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
151 
152 
153 #define CONFIG_SYS_NAND_ECCSIZE		512
154 #define CONFIG_SYS_NAND_ECCBYTES	26
155 #define CONFIG_SYS_NAND_ECCSTEPS	8
156 #define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
157 						CONFIG_SYS_NAND_ECCSTEPS)
158 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
159 /* END NAND Configuration. */
160 
161 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
162 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000 */
163 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
164 
165 
166 
167 #define CONFIG_CMD_MTDPARTS
168 
169 #define CONFIG_CMD_ASKENV /* monitor functions : ask for env variable */
170 #define CONFIG_VERSION_VARIABLE /* monitor functions :  u-boot version */
171 #define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
172 
173 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
174 /* Size must be a multiple of Nand erase size (524288 b) */
175 #define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(SPL)," \
176 					"512k(SPL.backup1)," \
177 					"512k(SPL.backup2)," \
178 					"512k(SPL.backup3),1536k(u-boot)," \
179 					"512k(u-boot-spl-os)," \
180 					"512k(u-boot-env),5m(kernel),-(rootfs)"
181 #define CONFIG_ENV_IS_IN_NAND
182 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
183 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
184 /* NAND: SPL falcon mode configs */
185 #ifdef CONFIG_SPL_OS_BOOT
186 #define CONFIG_CMD_SPL_NAND_OFS		0x240000 /* un-assigned */
187 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
188 #define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
189 #endif
190 
191 /*
192  * USB configuration.  We enable MUSB support, both for host and for
193  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
194  * board schematic and physical port wired to each.  Then for host we
195  * add mass storage support.
196  */
197 #define CONFIG_USB_MUSB_DSPS
198 #define CONFIG_ARCH_MISC_INIT
199 #define CONFIG_USB_MUSB_GADGET
200 #define CONFIG_USB_MUSB_PIO_ONLY
201 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
202 #define CONFIG_USB_GADGET
203 #define CONFIG_USB_GADGET_DUALSPEED
204 #define CONFIG_USB_GADGET_VBUS_DRAW	2
205 #define CONFIG_USB_MUSB_HOST
206 #define CONFIG_AM335X_USB0
207 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
208 #define CONFIG_AM335X_USB1
209 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
210 
211 #if defined(CONFIG_USB_MUSB_HOST)
212 #define CONFIG_CMD_USB
213 #define CONFIG_USB_STORAGE
214 #endif
215 
216 #if defined(CONFIG_SPL_BUILD)
217 /* disable host part of MUSB in SPL */
218 #undef CONFIG_USB_MUSB_HOST
219 /* Disable CPSW SPL support so we fit within the 101KiB limit. */
220 #undef CONFIG_SPL_ETH_SUPPORT
221 #endif
222 
223 /* CPSW ethernet */
224 #define CONFIG_NET_MULTI
225 
226 /* Network */
227 #define CONFIG_CMD_MII
228 #define CONFIG_PHYLIB
229 #define CONFIG_PHY_RESET	1
230 #define CONFIG_PHY_NATSEMI
231 #define CONFIG_PHY_REALTEK
232 
233 /* CPSW support */
234 #define CONFIG_SPL_ETH_SUPPORT
235 
236 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
237 
238 #endif	/* ! __CONFIG_PENGWYN_H */
239