xref: /openbmc/u-boot/include/configs/pcm058.h (revision 59e43c32)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) Stefano Babic <sbabic@denx.de>
4  */
5 
6 
7 #ifndef __PCM058_CONFIG_H
8 #define __PCM058_CONFIG_H
9 
10 #ifdef CONFIG_SPL
11 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
12 #include "imx6_spl.h"
13 #endif
14 
15 #include "mx6_common.h"
16 
17 /* Thermal */
18 #define CONFIG_IMX_THERMAL
19 
20 /* Serial */
21 #define CONFIG_MXC_UART
22 #define CONFIG_MXC_UART_BASE	       UART2_BASE
23 #define CONSOLE_DEV		"ttymxc1"
24 
25 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
26 
27 /* Early setup */
28 
29 
30 /* Size of malloc() pool */
31 #define CONFIG_SYS_MALLOC_LEN		(8 * SZ_1M)
32 
33 /* Ethernet */
34 #define CONFIG_FEC_MXC
35 #define IMX_FEC_BASE			ENET_BASE_ADDR
36 #define CONFIG_FEC_XCV_TYPE		RGMII
37 #define CONFIG_ETHPRIME			"FEC"
38 #define CONFIG_FEC_MXC_PHYADDR		3
39 
40 /* SPI Flash */
41 #define CONFIG_SF_DEFAULT_BUS		0
42 #define CONFIG_SF_DEFAULT_CS		0
43 #define CONFIG_SF_DEFAULT_SPEED		20000000
44 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
45 
46 /* I2C Configs */
47 #define CONFIG_SYS_I2C
48 #define CONFIG_SYS_I2C_MXC
49 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 2 */
50 #define CONFIG_SYS_I2C_SPEED		  100000
51 
52 #ifndef CONFIG_SPL_BUILD
53 /* Enable NAND support */
54 #define CONFIG_SYS_MAX_NAND_DEVICE	1
55 #define CONFIG_SYS_NAND_BASE		0x40000000
56 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
57 #define CONFIG_SYS_NAND_ONFI_DETECTION
58 #endif
59 
60 /* DMA stuff, needed for GPMI/MXS NAND support */
61 
62 /* Filesystem support */
63 
64 /* Physical Memory Map */
65 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
66 
67 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
68 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
69 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
70 
71 #define CONFIG_SYS_INIT_SP_OFFSET \
72 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
73 #define CONFIG_SYS_INIT_SP_ADDR \
74 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
75 
76 /* MMC Configs */
77 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
78 #define CONFIG_SYS_FSL_USDHC_NUM	1
79 
80 /* Environment organization */
81 #define CONFIG_ENV_SIZE                (16 * 1024)
82 #define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
83 #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
84 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
85 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
86 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
87 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
88 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
89 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
90 						CONFIG_ENV_SECT_SIZE)
91 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
92 
93 #ifdef CONFIG_ENV_IS_IN_NAND
94 #define CONFIG_ENV_OFFSET              (0x1E0000)
95 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
96 #endif
97 
98 #endif
99