xref: /openbmc/u-boot/include/configs/pcm052.h (revision 679590eb)
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the phytec PCM-052 SoM.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include <asm/arch/imx-regs.h>
13 
14 #define CONFIG_SKIP_LOWLEVEL_INIT
15 
16 /* Enable passing of ATAGs */
17 #define CONFIG_CMDLINE_TAG
18 
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
21 
22 /* Allow to overwrite serial and ethaddr */
23 #define CONFIG_ENV_OVERWRITE
24 
25 /* NAND support */
26 #define CONFIG_SYS_NAND_ONFI_DETECTION
27 
28 #ifdef CONFIG_CMD_NAND
29 #define CONFIG_SYS_MAX_NAND_DEVICE	1
30 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
31 
32 #define CONFIG_JFFS2_NAND
33 
34 /* Dynamic MTD partition support */
35 #define CONFIG_MTD_PARTITIONS
36 #define CONFIG_MTD_DEVICE
37 
38 #ifndef MTDIDS_DEFAULT
39 #define MTDIDS_DEFAULT			"nand0=NAND"
40 #endif
41 
42 #ifndef MTDPARTS_DEFAULT
43 #define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
44 					",128k(env1)"\
45 					",128k(env2)"\
46 					",128k(dtb)"\
47 					",6144k(kernel)"\
48 					",-(root)"
49 #endif
50 
51 #endif
52 
53 #define CONFIG_FSL_ESDHC
54 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
55 #define CONFIG_SYS_FSL_ESDHC_NUM	1
56 
57 /*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
58 
59 #define CONFIG_FEC_MXC
60 #define CONFIG_MII
61 #define IMX_FEC_BASE			ENET_BASE_ADDR
62 #define CONFIG_FEC_XCV_TYPE		RMII
63 #define CONFIG_FEC_MXC_PHYADDR          0
64 #define CONFIG_PHYLIB
65 #define CONFIG_PHY_MICREL
66 
67 /* QSPI Configs*/
68 
69 #ifdef CONFIG_FSL_QSPI
70 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
71 #define FSL_QSPI_FLASH_NUM		2
72 #define CONFIG_SYS_FSL_QSPI_LE
73 #endif
74 
75 /* I2C Configs */
76 #define CONFIG_SYS_I2C
77 #define CONFIG_SYS_I2C_MXC_I2C3
78 #define CONFIG_SYS_I2C_MXC
79 
80 /* RTC (actually an RV-4162 but M41T62-compatible) */
81 #define CONFIG_RTC_M41T62
82 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
83 #define CONFIG_SYS_RTC_BUS_NUM 2
84 
85 /* EEPROM (24FC256) */
86 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
87 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
88 #define CONFIG_SYS_I2C_EEPROM_BUS 2
89 
90 
91 #define CONFIG_LOADADDR			0x82000000
92 
93 /* We boot from the gfxRAM area of the OCRAM. */
94 #define CONFIG_SYS_TEXT_BASE		0x3f408000
95 #define CONFIG_BOARD_SIZE_LIMIT		524288
96 
97 /* if no target-specific extra environment settings were defined by the
98    target, define an empty one */
99 #ifndef PCM052_EXTRA_ENV_SETTINGS
100 #define PCM052_EXTRA_ENV_SETTINGS
101 #endif
102 
103 /* if no target-specific boot command was defined by the target,
104    define an empty one */
105 #ifndef PCM052_BOOTCOMMAND
106 #define PCM052_BOOTCOMMAND
107 #endif
108 
109 /* if no target-specific extra environment settings were defined by the
110    target, define an empty one */
111 #ifndef PCM052_NET_INIT
112 #define PCM052_NET_INIT
113 #endif
114 
115 /* boot command, including the target-defined one if any */
116 #define CONFIG_BOOTCOMMAND	PCM052_BOOTCOMMAND "run bootcmd_nand"
117 
118 /* Extra env settings (including the target-defined ones if any) */
119 #define CONFIG_EXTRA_ENV_SETTINGS \
120 	PCM052_EXTRA_ENV_SETTINGS \
121 	"autoload=no\0" \
122 	"fdt_high=0xffffffff\0" \
123 	"initrd_high=0xffffffff\0" \
124 	"blimg_file=u-boot.vyb\0" \
125 	"blimg_addr=0x81000000\0" \
126 	"kernel_file=zImage\0" \
127 	"kernel_addr=0x82000000\0" \
128 	"fdt_file=zImage.dtb\0" \
129 	"fdt_addr=0x81000000\0" \
130 	"ram_file=uRamdisk\0" \
131 	"ram_addr=0x83000000\0" \
132 	"filesys=rootfs.ubifs\0" \
133 	"sys_addr=0x81000000\0" \
134 	"tftploc=/path/to/tftp/directory/\0" \
135 	"nfs_root=/path/to/nfs/root\0" \
136 	"tftptimeout=1000\0" \
137 	"tftptimeoutcountmax=1000000\0" \
138 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
139 	"bootargs_base=setenv bootargs rw " \
140 		" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
141 		"console=ttyLP1,115200n8\0" \
142 	"bootargs_sd=setenv bootargs ${bootargs} " \
143 		"root=/dev/mmcblk0p2 rootwait\0" \
144 	"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
145 		"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
146 	"bootargs_nand=setenv bootargs ${bootargs} " \
147 		"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
148 	"bootargs_ram=setenv bootargs ${bootargs} " \
149 		"root=/dev/ram rw initrd=${ram_addr}\0" \
150 	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
151 	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
152 		"fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
153 		"fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
154 		"bootz ${kernel_addr} - ${fdt_addr}\0" \
155 	"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
156 		"tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
157 		"tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
158 		"bootz ${kernel_addr} - ${fdt_addr}\0" \
159 	"bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
160 		"nand read ${fdt_addr} dtb; " \
161 		"nand read ${kernel_addr} kernel; " \
162 		"bootz ${kernel_addr} - ${fdt_addr}\0" \
163 	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
164 		"nand read ${fdt_addr} dtb; " \
165 		"nand read ${kernel_addr} kernel; " \
166 		"nand read ${ram_addr} root; " \
167 		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
168 	"update_bootloader_from_tftp=" PCM052_NET_INIT \
169 		"if tftp ${blimg_addr} "\
170 		"${tftpdir}${blimg_file}; then " \
171 		"mtdparts default; " \
172 		"nand erase.part bootloader; " \
173 		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
174 	"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
175 		"${kernel_file}; " \
176 		"then mtdparts default; " \
177 		"nand erase.part kernel; " \
178 		"nand write ${kernel_addr} kernel ${filesize}; " \
179 		"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
180 		"nand erase.part dtb; " \
181 		"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
182 	"update_kernel_from_tftp=" PCM052_NET_INIT \
183 		"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
184 		"then setenv fdtsize ${filesize}; " \
185 		"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
186 		"mtdparts default; " \
187 		"nand erase.part dtb; " \
188 		"nand write ${fdt_addr} dtb ${fdtsize}; " \
189 		"nand erase.part kernel; " \
190 		"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
191 	"update_rootfs_from_tftp=" PCM052_NET_INIT \
192 		"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
193 		"then mtdparts default; " \
194 		"nand erase.part root; " \
195 		"ubi part root; " \
196 		"ubi create rootfs; " \
197 		"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
198 	"update_ramdisk_from_tftp=" PCM052_NET_INIT \
199 		"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
200 		"then mtdparts default; " \
201 		"nand erase.part root; " \
202 		"nand write ${ram_addr} root ${filesize}; fi\0"
203 
204 /* Miscellaneous configurable options */
205 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
206 #define CONFIG_AUTO_COMPLETE
207 #define CONFIG_CMDLINE_EDITING
208 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
209 #define CONFIG_SYS_PBSIZE		\
210 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
211 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
212 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
213 
214 #define CONFIG_SYS_MEMTEST_START	0x80010000
215 #define CONFIG_SYS_MEMTEST_END		0x87C00000
216 
217 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
218 
219 /* Physical memory map */
220 #define CONFIG_NR_DRAM_BANKS		1
221 #define PHYS_SDRAM			(0x80000000)
222 #define PHYS_SDRAM_SIZE			(CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
223 
224 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
225 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
226 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
227 
228 #define CONFIG_SYS_INIT_SP_OFFSET \
229 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
230 #define CONFIG_SYS_INIT_SP_ADDR \
231 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
232 
233 /* environment organization */
234 #ifdef CONFIG_ENV_IS_IN_MMC
235 #define CONFIG_ENV_SIZE			(8 * 1024)
236 
237 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
238 #define CONFIG_SYS_MMC_ENV_DEV		0
239 #endif
240 
241 #ifdef CONFIG_ENV_IS_IN_NAND
242 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
243 #define CONFIG_ENV_SIZE			(8 * 1024)
244 #define CONFIG_ENV_OFFSET		0xA0000
245 #define CONFIG_ENV_SIZE_REDUND		(8 * 1024)
246 #define CONFIG_ENV_OFFSET_REDUND	0xC0000
247 #endif
248 
249 #endif
250