1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the phytec PCM-052 SoM. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include <asm/arch/imx-regs.h> 13 14 #define CONFIG_VF610 15 16 #define CONFIG_SYS_THUMB_BUILD 17 18 #define CONFIG_SKIP_LOWLEVEL_INIT 19 20 /* Enable passing of ATAGs */ 21 #define CONFIG_CMDLINE_TAG 22 23 /* Size of malloc() pool */ 24 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 25 26 #define CONFIG_BOARD_EARLY_INIT_F 27 28 /* Allow to overwrite serial and ethaddr */ 29 #define CONFIG_ENV_OVERWRITE 30 #define CONFIG_BAUDRATE 115200 31 32 /* NAND support */ 33 #define CONFIG_CMD_NAND 34 #define CONFIG_CMD_NAND_TRIMFFS 35 #define CONFIG_SYS_NAND_ONFI_DETECTION 36 37 #ifdef CONFIG_CMD_NAND 38 #define CONFIG_SYS_MAX_NAND_DEVICE 1 39 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 40 41 #define CONFIG_JFFS2_NAND 42 43 /* UBI */ 44 #define CONFIG_CMD_UBIFS 45 #define CONFIG_RBTREE 46 #define CONFIG_LZO 47 48 /* Dynamic MTD partition support */ 49 #define CONFIG_CMD_MTDPARTS 50 #define CONFIG_MTD_PARTITIONS 51 #define CONFIG_MTD_DEVICE 52 53 #ifndef MTDIDS_DEFAULT 54 #define MTDIDS_DEFAULT "nand0=NAND" 55 #endif 56 57 #ifndef MTDPARTS_DEFAULT 58 #define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\ 59 ",128k(env1)"\ 60 ",128k(env2)"\ 61 ",128k(dtb)"\ 62 ",6144k(kernel)"\ 63 ",-(root)" 64 #endif 65 66 #endif 67 68 #define CONFIG_FSL_ESDHC 69 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 70 #define CONFIG_SYS_FSL_ESDHC_NUM 1 71 72 /*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/ 73 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 74 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 75 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 76 77 #define CONFIG_GENERIC_MMC 78 #define CONFIG_DOS_PARTITION 79 80 #define CONFIG_FEC_MXC 81 #define CONFIG_MII 82 #define IMX_FEC_BASE ENET_BASE_ADDR 83 #define CONFIG_FEC_XCV_TYPE RMII 84 #define CONFIG_FEC_MXC_PHYADDR 0 85 #define CONFIG_PHYLIB 86 #define CONFIG_PHY_MICREL 87 88 /* QSPI Configs*/ 89 90 #ifdef CONFIG_FSL_QSPI 91 #define FSL_QSPI_FLASH_SIZE (1 << 24) 92 #define FSL_QSPI_FLASH_NUM 2 93 #define CONFIG_SYS_FSL_QSPI_LE 94 #endif 95 96 /* I2C Configs */ 97 #define CONFIG_SYS_I2C 98 #define CONFIG_SYS_I2C_MXC_I2C3 99 #define CONFIG_SYS_I2C_MXC 100 101 /* RTC (actually an RV-4162 but M41T62-compatible) */ 102 #define CONFIG_CMD_DATE 103 #define CONFIG_RTC_M41T62 104 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 105 #define CONFIG_SYS_RTC_BUS_NUM 2 106 107 /* EEPROM (24FC256) */ 108 #define CONFIG_CMD_EEPROM 109 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 111 #define CONFIG_SYS_I2C_EEPROM_BUS 2 112 113 114 #define CONFIG_LOADADDR 0x82000000 115 116 /* We boot from the gfxRAM area of the OCRAM. */ 117 #define CONFIG_SYS_TEXT_BASE 0x3f408000 118 #define CONFIG_BOARD_SIZE_LIMIT 524288 119 120 /* if no target-specific extra environment settings were defined by the 121 target, define an empty one */ 122 #ifndef PCM052_EXTRA_ENV_SETTINGS 123 #define PCM052_EXTRA_ENV_SETTINGS 124 #endif 125 126 /* if no target-specific boot command was defined by the target, 127 define an empty one */ 128 #ifndef PCM052_BOOTCOMMAND 129 #define PCM052_BOOTCOMMAND 130 #endif 131 132 /* if no target-specific extra environment settings were defined by the 133 target, define an empty one */ 134 #ifndef PCM052_NET_INIT 135 #define PCM052_NET_INIT 136 #endif 137 138 /* boot command, including the target-defined one if any */ 139 #define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand" 140 141 /* Extra env settings (including the target-defined ones if any) */ 142 #define CONFIG_EXTRA_ENV_SETTINGS \ 143 PCM052_EXTRA_ENV_SETTINGS \ 144 "autoload=no\0" \ 145 "fdt_high=0xffffffff\0" \ 146 "initrd_high=0xffffffff\0" \ 147 "blimg_file=u-boot.vyb\0" \ 148 "blimg_addr=0x81000000\0" \ 149 "kernel_file=zImage\0" \ 150 "kernel_addr=0x82000000\0" \ 151 "fdt_file=zImage.dtb\0" \ 152 "fdt_addr=0x81000000\0" \ 153 "ram_file=uRamdisk\0" \ 154 "ram_addr=0x83000000\0" \ 155 "filesys=rootfs.ubifs\0" \ 156 "sys_addr=0x81000000\0" \ 157 "tftploc=/path/to/tftp/directory/\0" \ 158 "nfs_root=/path/to/nfs/root\0" \ 159 "tftptimeout=1000\0" \ 160 "tftptimeoutcountmax=1000000\0" \ 161 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 162 "bootargs_base=setenv bootargs rw " \ 163 " mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \ 164 "console=ttyLP1,115200n8\0" \ 165 "bootargs_sd=setenv bootargs ${bootargs} " \ 166 "root=/dev/mmcblk0p2 rootwait\0" \ 167 "bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \ 168 "nfsroot=${serverip}:${nfs_root},v3,tcp\0" \ 169 "bootargs_nand=setenv bootargs ${bootargs} " \ 170 "ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \ 171 "bootargs_ram=setenv bootargs ${bootargs} " \ 172 "root=/dev/ram rw initrd=${ram_addr}\0" \ 173 "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 174 "bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \ 175 "fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \ 176 "fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \ 177 "bootz ${kernel_addr} - ${fdt_addr}\0" \ 178 "bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \ 179 "tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \ 180 "tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \ 181 "bootz ${kernel_addr} - ${fdt_addr}\0" \ 182 "bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \ 183 "nand read ${fdt_addr} dtb; " \ 184 "nand read ${kernel_addr} kernel; " \ 185 "bootz ${kernel_addr} - ${fdt_addr}\0" \ 186 "bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \ 187 "nand read ${fdt_addr} dtb; " \ 188 "nand read ${kernel_addr} kernel; " \ 189 "nand read ${ram_addr} root; " \ 190 "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ 191 "update_bootloader_from_tftp=" PCM052_NET_INIT \ 192 "if tftp ${blimg_addr} "\ 193 "${tftpdir}${blimg_file}; then " \ 194 "mtdparts default; " \ 195 "nand erase.part bootloader; " \ 196 "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \ 197 "update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \ 198 "${kernel_file}; " \ 199 "then mtdparts default; " \ 200 "nand erase.part kernel; " \ 201 "nand write ${kernel_addr} kernel ${filesize}; " \ 202 "if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \ 203 "nand erase.part dtb; " \ 204 "nand write ${fdt_addr} dtb ${filesize}; fi\0" \ 205 "update_kernel_from_tftp=" PCM052_NET_INIT \ 206 "if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \ 207 "then setenv fdtsize ${filesize}; " \ 208 "if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \ 209 "mtdparts default; " \ 210 "nand erase.part dtb; " \ 211 "nand write ${fdt_addr} dtb ${fdtsize}; " \ 212 "nand erase.part kernel; " \ 213 "nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \ 214 "update_rootfs_from_tftp=" PCM052_NET_INIT \ 215 "if tftp ${sys_addr} ${tftpdir}${filesys}; " \ 216 "then mtdparts default; " \ 217 "nand erase.part root; " \ 218 "ubi part root; " \ 219 "ubi create rootfs; " \ 220 "ubi write ${sys_addr} rootfs ${filesize}; fi\0" \ 221 "update_ramdisk_from_tftp=" PCM052_NET_INIT \ 222 "if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ 223 "then mtdparts default; " \ 224 "nand erase.part root; " \ 225 "nand write ${ram_addr} root ${filesize}; fi\0" 226 227 /* Miscellaneous configurable options */ 228 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 229 #define CONFIG_AUTO_COMPLETE 230 #define CONFIG_CMDLINE_EDITING 231 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 232 #define CONFIG_SYS_PBSIZE \ 233 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 234 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 235 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 236 237 #define CONFIG_SYS_MEMTEST_START 0x80010000 238 #define CONFIG_SYS_MEMTEST_END 0x87C00000 239 240 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 241 242 /* 243 * Stack sizes 244 * The stack sizes are set up in start.S using the settings below 245 */ 246 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 247 248 /* Physical memory map */ 249 #define CONFIG_NR_DRAM_BANKS 1 250 #define PHYS_SDRAM (0x80000000) 251 #define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024) 252 253 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 254 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 255 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 256 257 #define CONFIG_SYS_INIT_SP_OFFSET \ 258 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 259 #define CONFIG_SYS_INIT_SP_ADDR \ 260 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 261 262 /* FLASH and environment organization */ 263 #define CONFIG_SYS_NO_FLASH 264 265 #ifdef CONFIG_ENV_IS_IN_MMC 266 #define CONFIG_ENV_SIZE (8 * 1024) 267 268 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 269 #define CONFIG_SYS_MMC_ENV_DEV 0 270 #endif 271 272 #ifdef CONFIG_ENV_IS_IN_NAND 273 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 274 #define CONFIG_ENV_SIZE (8 * 1024) 275 #define CONFIG_ENV_OFFSET 0xA0000 276 #define CONFIG_ENV_SIZE_REDUND (8 * 1024) 277 #define CONFIG_ENV_OFFSET_REDUND 0xC0000 278 #endif 279 280 #endif 281