1 /*
2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 /*
8  * QorIQ RDB boards configuration file
9  */
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #if defined(CONFIG_TARGET_P1020MBG)
14 #define CONFIG_BOARDNAME "P1020MBG-PC"
15 #define CONFIG_VSC7385_ENET
16 #define CONFIG_SLIC
17 #define __SW_BOOT_MASK		0x03
18 #define __SW_BOOT_NOR		0xe4
19 #define __SW_BOOT_SD		0x54
20 #define CONFIG_SYS_L2_SIZE	(256 << 10)
21 #endif
22 
23 #if defined(CONFIG_TARGET_P1020UTM)
24 #define CONFIG_BOARDNAME "P1020UTM-PC"
25 #define __SW_BOOT_MASK		0x03
26 #define __SW_BOOT_NOR		0xe0
27 #define __SW_BOOT_SD		0x50
28 #define CONFIG_SYS_L2_SIZE	(256 << 10)
29 #endif
30 
31 #if defined(CONFIG_TARGET_P1020RDB_PC)
32 #define CONFIG_BOARDNAME "P1020RDB-PC"
33 #define CONFIG_NAND_FSL_ELBC
34 #define CONFIG_VSC7385_ENET
35 #define CONFIG_SLIC
36 #define __SW_BOOT_MASK		0x03
37 #define __SW_BOOT_NOR		0x5c
38 #define __SW_BOOT_SPI		0x1c
39 #define __SW_BOOT_SD		0x9c
40 #define __SW_BOOT_NAND		0xec
41 #define __SW_BOOT_PCIE		0x6c
42 #define CONFIG_SYS_L2_SIZE	(256 << 10)
43 #endif
44 
45 /*
46  * P1020RDB-PD board has user selectable switches for evaluating different
47  * frequency and boot options for the P1020 device. The table that
48  * follow describe the available options. The front six binary number was in
49  * accordance with SW3[1:6].
50  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
51  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
52  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
53  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
54  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
55  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
56  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
57  */
58 #if defined(CONFIG_TARGET_P1020RDB_PD)
59 #define CONFIG_BOARDNAME "P1020RDB-PD"
60 #define CONFIG_NAND_FSL_ELBC
61 #define CONFIG_VSC7385_ENET
62 #define CONFIG_SLIC
63 #define __SW_BOOT_MASK		0x03
64 #define __SW_BOOT_NOR		0x64
65 #define __SW_BOOT_SPI		0x34
66 #define __SW_BOOT_SD		0x24
67 #define __SW_BOOT_NAND		0x44
68 #define __SW_BOOT_PCIE		0x74
69 #define CONFIG_SYS_L2_SIZE	(256 << 10)
70 /*
71  * Dynamic MTD Partition support with mtdparts
72  */
73 #define CONFIG_MTD_DEVICE
74 #define CONFIG_MTD_PARTITIONS
75 #define CONFIG_FLASH_CFI_MTD
76 #define MTDIDS_DEFAULT "nor0=ec000000.nor"
77 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
78 			"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
79 #endif
80 
81 #if defined(CONFIG_TARGET_P1021RDB)
82 #define CONFIG_BOARDNAME "P1021RDB-PC"
83 #define CONFIG_NAND_FSL_ELBC
84 #define CONFIG_QE
85 #define CONFIG_VSC7385_ENET
86 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
87 						addresses in the LBC */
88 #define __SW_BOOT_MASK		0x03
89 #define __SW_BOOT_NOR		0x5c
90 #define __SW_BOOT_SPI		0x1c
91 #define __SW_BOOT_SD		0x9c
92 #define __SW_BOOT_NAND		0xec
93 #define __SW_BOOT_PCIE		0x6c
94 #define CONFIG_SYS_L2_SIZE	(256 << 10)
95 /*
96  * Dynamic MTD Partition support with mtdparts
97  */
98 #define CONFIG_MTD_DEVICE
99 #define CONFIG_MTD_PARTITIONS
100 #define CONFIG_FLASH_CFI_MTD
101 #ifdef CONFIG_PHYS_64BIT
102 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
103 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
104 			"256k(dtb),4608k(kernel),9728k(fs)," \
105 			"256k(qe-ucode-firmware),1280k(u-boot)"
106 #else
107 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
108 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
109 			"256k(dtb),4608k(kernel),9728k(fs)," \
110 			"256k(qe-ucode-firmware),1280k(u-boot)"
111 #endif
112 #endif
113 
114 #if defined(CONFIG_TARGET_P1024RDB)
115 #define CONFIG_BOARDNAME "P1024RDB"
116 #define CONFIG_NAND_FSL_ELBC
117 #define CONFIG_SLIC
118 #define __SW_BOOT_MASK		0xf3
119 #define __SW_BOOT_NOR		0x00
120 #define __SW_BOOT_SPI		0x08
121 #define __SW_BOOT_SD		0x04
122 #define __SW_BOOT_NAND		0x0c
123 #define CONFIG_SYS_L2_SIZE	(256 << 10)
124 #endif
125 
126 #if defined(CONFIG_TARGET_P1025RDB)
127 #define CONFIG_BOARDNAME "P1025RDB"
128 #define CONFIG_NAND_FSL_ELBC
129 #define CONFIG_QE
130 #define CONFIG_SLIC
131 
132 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
133 						addresses in the LBC */
134 #define __SW_BOOT_MASK		0xf3
135 #define __SW_BOOT_NOR		0x00
136 #define __SW_BOOT_SPI		0x08
137 #define __SW_BOOT_SD		0x04
138 #define __SW_BOOT_NAND		0x0c
139 #define CONFIG_SYS_L2_SIZE	(256 << 10)
140 #endif
141 
142 #if defined(CONFIG_TARGET_P2020RDB)
143 #define CONFIG_BOARDNAME "P2020RDB-PC"
144 #define CONFIG_NAND_FSL_ELBC
145 #define CONFIG_VSC7385_ENET
146 #define __SW_BOOT_MASK		0x03
147 #define __SW_BOOT_NOR		0xc8
148 #define __SW_BOOT_SPI		0x28
149 #define __SW_BOOT_SD		0x68 /* or 0x18 */
150 #define __SW_BOOT_NAND		0xe8
151 #define __SW_BOOT_PCIE		0xa8
152 #define CONFIG_SYS_L2_SIZE	(512 << 10)
153 /*
154  * Dynamic MTD Partition support with mtdparts
155  */
156 #define CONFIG_MTD_DEVICE
157 #define CONFIG_MTD_PARTITIONS
158 #define CONFIG_FLASH_CFI_MTD
159 #ifdef CONFIG_PHYS_64BIT
160 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
161 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
162 			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
163 #else
164 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
165 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
166 			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
167 #endif
168 #endif
169 
170 #ifdef CONFIG_SDCARD
171 #define CONFIG_SPL_MMC_MINIMAL
172 #define CONFIG_SPL_FLUSH_IMAGE
173 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
174 #define CONFIG_SYS_TEXT_BASE		0x11001000
175 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
176 #define CONFIG_SPL_PAD_TO		0x20000
177 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
178 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
179 #define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
180 #define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
181 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
182 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
183 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
184 #define CONFIG_SPL_MMC_BOOT
185 #ifdef CONFIG_SPL_BUILD
186 #define CONFIG_SPL_COMMON_INIT_DDR
187 #endif
188 #endif
189 
190 #ifdef CONFIG_SPIFLASH
191 #define CONFIG_SPL_SPI_FLASH_MINIMAL
192 #define CONFIG_SPL_FLUSH_IMAGE
193 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
194 #define CONFIG_SYS_TEXT_BASE		0x11001000
195 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
196 #define CONFIG_SPL_PAD_TO		0x20000
197 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
198 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
199 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
200 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
201 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
202 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
203 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
204 #define CONFIG_SPL_SPI_BOOT
205 #ifdef CONFIG_SPL_BUILD
206 #define CONFIG_SPL_COMMON_INIT_DDR
207 #endif
208 #endif
209 
210 #ifdef CONFIG_NAND
211 #ifdef CONFIG_TPL_BUILD
212 #define CONFIG_SPL_NAND_BOOT
213 #define CONFIG_SPL_FLUSH_IMAGE
214 #define CONFIG_SPL_NAND_INIT
215 #define CONFIG_SPL_COMMON_INIT_DDR
216 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
217 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
218 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
219 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(832 << 10)
220 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
221 #define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
222 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
223 #elif defined(CONFIG_SPL_BUILD)
224 #define CONFIG_SPL_INIT_MINIMAL
225 #define CONFIG_SPL_FLUSH_IMAGE
226 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
227 #define CONFIG_SPL_TEXT_BASE		0xff800000
228 #define CONFIG_SPL_MAX_SIZE		4096
229 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
230 #define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
231 #define CONFIG_SYS_NAND_U_BOOT_START	0xf8f80000
232 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
233 #endif /* not CONFIG_TPL_BUILD */
234 
235 #define CONFIG_SPL_PAD_TO		0x20000
236 #define CONFIG_TPL_PAD_TO		0x20000
237 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
238 #define CONFIG_SYS_TEXT_BASE		0x11001000
239 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
240 #endif
241 
242 #ifndef CONFIG_SYS_TEXT_BASE
243 #define CONFIG_SYS_TEXT_BASE		0xeff40000
244 #endif
245 
246 #ifndef CONFIG_RESET_VECTOR_ADDRESS
247 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
248 #endif
249 
250 #ifndef CONFIG_SYS_MONITOR_BASE
251 #ifdef CONFIG_SPL_BUILD
252 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
253 #else
254 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
255 #endif
256 #endif
257 
258 #define CONFIG_MP
259 
260 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
261 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
262 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
263 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
264 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
265 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
266 
267 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
268 #define CONFIG_ENV_OVERWRITE
269 
270 #define CONFIG_SATA_SIL
271 #define CONFIG_SYS_SATA_MAX_DEVICE	2
272 #define CONFIG_LIBATA
273 #define CONFIG_LBA48
274 
275 #if defined(CONFIG_TARGET_P2020RDB)
276 #define CONFIG_SYS_CLK_FREQ	100000000
277 #else
278 #define CONFIG_SYS_CLK_FREQ	66666666
279 #endif
280 #define CONFIG_DDR_CLK_FREQ	66666666
281 
282 #define CONFIG_HWCONFIG
283 /*
284  * These can be toggled for performance analysis, otherwise use default.
285  */
286 #define CONFIG_L2_CACHE
287 #define CONFIG_BTB
288 
289 #define CONFIG_ENABLE_36BIT_PHYS
290 
291 #ifdef CONFIG_PHYS_64BIT
292 #define CONFIG_ADDR_MAP			1
293 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
294 #endif
295 
296 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
297 #define CONFIG_SYS_MEMTEST_END		0x1fffffff
298 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
299 
300 #define CONFIG_SYS_CCSRBAR		0xffe00000
301 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
302 
303 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
304        SPL code*/
305 #ifdef CONFIG_SPL_BUILD
306 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
307 #endif
308 
309 /* DDR Setup */
310 #define CONFIG_SYS_DDR_RAW_TIMING
311 #define CONFIG_DDR_SPD
312 #define CONFIG_SYS_SPD_BUS_NUM 1
313 #define SPD_EEPROM_ADDRESS 0x52
314 #undef CONFIG_FSL_DDR_INTERACTIVE
315 
316 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
317 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_2G
318 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
319 #else
320 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_1G
321 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
322 #endif
323 #define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
324 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
325 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
326 
327 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
328 
329 /* Default settings for DDR3 */
330 #ifndef CONFIG_TARGET_P2020RDB
331 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
332 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
333 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
334 #define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
335 #define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
336 #define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
337 
338 #define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
339 #define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
340 #define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
341 #define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
342 
343 #define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
344 #define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
345 #define CONFIG_SYS_DDR_SR_CNTR		0x00000000
346 #define CONFIG_SYS_DDR_RCW_1		0x00000000
347 #define CONFIG_SYS_DDR_RCW_2		0x00000000
348 #define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3	*/
349 #define CONFIG_SYS_DDR_CONTROL_2	0x04401050
350 #define CONFIG_SYS_DDR_TIMING_4		0x00220001
351 #define CONFIG_SYS_DDR_TIMING_5		0x03402400
352 
353 #define CONFIG_SYS_DDR_TIMING_3		0x00020000
354 #define CONFIG_SYS_DDR_TIMING_0		0x00330004
355 #define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
356 #define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
357 #define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
358 #define CONFIG_SYS_DDR_MODE_1		0x40461520
359 #define CONFIG_SYS_DDR_MODE_2		0x8000c000
360 #define CONFIG_SYS_DDR_INTERVAL		0x0C300000
361 #endif
362 
363 #undef CONFIG_CLOCKS_IN_MHZ
364 
365 /*
366  * Memory map
367  *
368  * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
369  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
370  * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
371  * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
372  *   (early boot only)
373  * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
374  * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
375  * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
376  * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
377  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
378  * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
379  * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
380  */
381 
382 /*
383  * Local Bus Definitions
384  */
385 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
386 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
387 #define CONFIG_SYS_FLASH_BASE		0xec000000
388 #elif defined(CONFIG_TARGET_P1020UTM)
389 #define CONFIG_SYS_MAX_FLASH_SECT	256	/* 32M */
390 #define CONFIG_SYS_FLASH_BASE		0xee000000
391 #else
392 #define CONFIG_SYS_MAX_FLASH_SECT	128	/* 16M */
393 #define CONFIG_SYS_FLASH_BASE		0xef000000
394 #endif
395 
396 #ifdef CONFIG_PHYS_64BIT
397 #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
398 #else
399 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
400 #endif
401 
402 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
403 	| BR_PS_16 | BR_V)
404 
405 #define CONFIG_FLASH_OR_PRELIM	0xfc000ff7
406 
407 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
408 #define CONFIG_SYS_FLASH_QUIET_TEST
409 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
410 
411 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
412 
413 #undef CONFIG_SYS_FLASH_CHECKSUM
414 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
415 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
416 
417 #define CONFIG_FLASH_CFI_DRIVER
418 #define CONFIG_SYS_FLASH_CFI
419 #define CONFIG_SYS_FLASH_EMPTY_INFO
420 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
421 
422 /* Nand Flash */
423 #ifdef CONFIG_NAND_FSL_ELBC
424 #define CONFIG_SYS_NAND_BASE		0xff800000
425 #ifdef CONFIG_PHYS_64BIT
426 #define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
427 #else
428 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
429 #endif
430 
431 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
432 #define CONFIG_SYS_MAX_NAND_DEVICE	1
433 #if defined(CONFIG_TARGET_P1020RDB_PD)
434 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
435 #else
436 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
437 #endif
438 
439 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
440 	| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
441 	| BR_PS_8	/* Port Size = 8 bit */ \
442 	| BR_MS_FCM	/* MSEL = FCM */ \
443 	| BR_V)	/* valid */
444 #if defined(CONFIG_TARGET_P1020RDB_PD)
445 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB \
446 	| OR_FCM_PGS	/* Large Page*/ \
447 	| OR_FCM_CSCT \
448 	| OR_FCM_CST \
449 	| OR_FCM_CHT \
450 	| OR_FCM_SCY_1 \
451 	| OR_FCM_TRLX \
452 	| OR_FCM_EHTR)
453 #else
454 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB	/* small page */ \
455 	| OR_FCM_CSCT \
456 	| OR_FCM_CST \
457 	| OR_FCM_CHT \
458 	| OR_FCM_SCY_1 \
459 	| OR_FCM_TRLX \
460 	| OR_FCM_EHTR)
461 #endif
462 #endif /* CONFIG_NAND_FSL_ELBC */
463 
464 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
465 
466 #define CONFIG_SYS_INIT_RAM_LOCK
467 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
468 #ifdef CONFIG_PHYS_64BIT
469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
471 /* The assembler doesn't like typecast */
472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
473 	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
474 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
475 #else
476 /* Initial L1 address */
477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
480 #endif
481 /* Size of used area in RAM */
482 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
483 
484 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
485 					GENERATED_GBL_DATA_SIZE)
486 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
487 
488 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
489 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)/* Reserved for malloc */
490 
491 #define CONFIG_SYS_CPLD_BASE	0xffa00000
492 #ifdef CONFIG_PHYS_64BIT
493 #define CONFIG_SYS_CPLD_BASE_PHYS	0xfffa00000ull
494 #else
495 #define CONFIG_SYS_CPLD_BASE_PHYS	CONFIG_SYS_CPLD_BASE
496 #endif
497 /* CPLD config size: 1Mb */
498 #define CONFIG_CPLD_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
499 					BR_PS_8 | BR_V)
500 #define CONFIG_CPLD_OR_PRELIM	(0xfff009f7)
501 
502 #define CONFIG_SYS_PMC_BASE	0xff980000
503 #define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
504 #define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
505 					BR_PS_8 | BR_V)
506 #define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
507 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
508 				 OR_GPCM_EAD)
509 
510 #ifdef CONFIG_NAND
511 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
512 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
513 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
514 #define CONFIG_SYS_OR1_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
515 #else
516 #define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
517 #define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
518 #ifdef CONFIG_NAND_FSL_ELBC
519 #define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
520 #define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
521 #endif
522 #endif
523 #define CONFIG_SYS_BR3_PRELIM	CONFIG_CPLD_BR_PRELIM	/* CPLD Base Address */
524 #define CONFIG_SYS_OR3_PRELIM	CONFIG_CPLD_OR_PRELIM	/* CPLD Options */
525 
526 /* Vsc7385 switch */
527 #ifdef CONFIG_VSC7385_ENET
528 #define CONFIG_SYS_VSC7385_BASE		0xffb00000
529 
530 #ifdef CONFIG_PHYS_64BIT
531 #define CONFIG_SYS_VSC7385_BASE_PHYS	0xfffb00000ull
532 #else
533 #define CONFIG_SYS_VSC7385_BASE_PHYS	CONFIG_SYS_VSC7385_BASE
534 #endif
535 
536 #define CONFIG_SYS_VSC7385_BR_PRELIM	\
537 	(BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
538 #define CONFIG_SYS_VSC7385_OR_PRELIM	(OR_AM_128KB | OR_GPCM_CSNT | \
539 			OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
540 			OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
541 
542 #define CONFIG_SYS_BR2_PRELIM	CONFIG_SYS_VSC7385_BR_PRELIM
543 #define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_VSC7385_OR_PRELIM
544 
545 /* The size of the VSC7385 firmware image */
546 #define CONFIG_VSC7385_IMAGE_SIZE	8192
547 #endif
548 
549 /*
550  * Config the L2 Cache as L2 SRAM
551 */
552 #if defined(CONFIG_SPL_BUILD)
553 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
554 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
555 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
556 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
557 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
558 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
559 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
560 #define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
561 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
562 #if defined(CONFIG_TARGET_P2020RDB)
563 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(364 << 10)
564 #else
565 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(108 << 10)
566 #endif
567 #elif defined(CONFIG_NAND)
568 #ifdef CONFIG_TPL_BUILD
569 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
570 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
571 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
572 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
573 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
574 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
575 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
576 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
577 #else
578 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
579 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
580 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
581 #define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x2000)
582 #define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
583 #endif /* CONFIG_TPL_BUILD */
584 #endif
585 #endif
586 
587 /* Serial Port - controlled on board with jumper J8
588  * open - index 2
589  * shorted - index 1
590  */
591 #define CONFIG_CONS_INDEX		1
592 #undef CONFIG_SERIAL_SOFTWARE_FIFO
593 #define CONFIG_SYS_NS16550_SERIAL
594 #define CONFIG_SYS_NS16550_REG_SIZE	1
595 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
596 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
597 #define CONFIG_NS16550_MIN_FUNCTIONS
598 #endif
599 
600 #define CONFIG_SYS_BAUDRATE_TABLE	\
601 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
602 
603 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
604 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
605 
606 /* I2C */
607 #define CONFIG_SYS_I2C
608 #define CONFIG_SYS_I2C_FSL
609 #define CONFIG_SYS_FSL_I2C_SPEED	400000
610 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
611 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
612 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
613 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
614 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
615 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
616 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
617 #define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
618 
619 /*
620  * I2C2 EEPROM
621  */
622 #undef CONFIG_ID_EEPROM
623 
624 #define CONFIG_RTC_PT7C4338
625 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
626 #define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
627 
628 /* enable read and write access to EEPROM */
629 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
630 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
631 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
632 
633 /*
634  * eSPI - Enhanced SPI
635  */
636 #define CONFIG_HARD_SPI
637 
638 #if defined(CONFIG_SPI_FLASH)
639 #define CONFIG_SF_DEFAULT_SPEED	10000000
640 #define CONFIG_SF_DEFAULT_MODE	0
641 #endif
642 
643 #if defined(CONFIG_PCI)
644 /*
645  * General PCI
646  * Memory space is mapped 1-1, but I/O space must start from 0.
647  */
648 
649 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
650 #define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT"
651 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
652 #ifdef CONFIG_PHYS_64BIT
653 #define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
654 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
655 #else
656 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
657 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
658 #endif
659 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
660 #define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
661 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
662 #ifdef CONFIG_PHYS_64BIT
663 #define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
664 #else
665 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
666 #endif
667 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
668 
669 /* controller 1, Slot 2, tgtid 1, Base address a000 */
670 #define CONFIG_SYS_PCIE1_NAME		"mini PCIe SLOT"
671 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
672 #ifdef CONFIG_PHYS_64BIT
673 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
674 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
675 #else
676 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
677 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
678 #endif
679 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
680 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
681 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
682 #ifdef CONFIG_PHYS_64BIT
683 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
684 #else
685 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
686 #endif
687 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
688 
689 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
690 #endif /* CONFIG_PCI */
691 
692 #if defined(CONFIG_TSEC_ENET)
693 #define CONFIG_MII		/* MII PHY management */
694 #define CONFIG_TSEC1
695 #define CONFIG_TSEC1_NAME	"eTSEC1"
696 #define CONFIG_TSEC2
697 #define CONFIG_TSEC2_NAME	"eTSEC2"
698 #define CONFIG_TSEC3
699 #define CONFIG_TSEC3_NAME	"eTSEC3"
700 
701 #define TSEC1_PHY_ADDR	2
702 #define TSEC2_PHY_ADDR	0
703 #define TSEC3_PHY_ADDR	1
704 
705 #define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
706 #define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
707 #define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
708 
709 #define TSEC1_PHYIDX	0
710 #define TSEC2_PHYIDX	0
711 #define TSEC3_PHYIDX	0
712 
713 #define CONFIG_ETHPRIME	"eTSEC1"
714 
715 #define CONFIG_HAS_ETH0
716 #define CONFIG_HAS_ETH1
717 #define CONFIG_HAS_ETH2
718 #endif /* CONFIG_TSEC_ENET */
719 
720 #ifdef CONFIG_QE
721 /* QE microcode/firmware address */
722 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
723 #define CONFIG_SYS_QE_FW_ADDR	0xefec0000
724 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
725 #endif /* CONFIG_QE */
726 
727 #ifdef CONFIG_TARGET_P1025RDB
728 /*
729  * QE UEC ethernet configuration
730  */
731 #define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
732 
733 #undef CONFIG_UEC_ETH
734 #define CONFIG_PHY_MODE_NEED_CHANGE
735 
736 #define CONFIG_UEC_ETH1	/* ETH1 */
737 #define CONFIG_HAS_ETH0
738 
739 #ifdef CONFIG_UEC_ETH1
740 #define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
741 #define CONFIG_SYS_UEC1_RX_CLK	QE_CLK12 /* CLK12 for MII */
742 #define CONFIG_SYS_UEC1_TX_CLK	QE_CLK9 /* CLK9 for MII */
743 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
744 #define CONFIG_SYS_UEC1_PHY_ADDR	0x0	/* 0x0 for MII */
745 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
746 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
747 #endif /* CONFIG_UEC_ETH1 */
748 
749 #define CONFIG_UEC_ETH5	/* ETH5 */
750 #define CONFIG_HAS_ETH1
751 
752 #ifdef CONFIG_UEC_ETH5
753 #define CONFIG_SYS_UEC5_UCC_NUM	4	/* UCC5 */
754 #define CONFIG_SYS_UEC5_RX_CLK	QE_CLK_NONE
755 #define CONFIG_SYS_UEC5_TX_CLK	QE_CLK13 /* CLK 13 for RMII */
756 #define CONFIG_SYS_UEC5_ETH_TYPE	FAST_ETH
757 #define CONFIG_SYS_UEC5_PHY_ADDR	0x3	/* 0x3 for RMII */
758 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
759 #define CONFIG_SYS_UEC5_INTERFACE_SPEED	100
760 #endif /* CONFIG_UEC_ETH5 */
761 #endif /* CONFIG_TARGET_P1025RDB */
762 
763 /*
764  * Environment
765  */
766 #ifdef CONFIG_SPIFLASH
767 #define CONFIG_ENV_SPI_BUS	0
768 #define CONFIG_ENV_SPI_CS	0
769 #define CONFIG_ENV_SPI_MAX_HZ	10000000
770 #define CONFIG_ENV_SPI_MODE	0
771 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
772 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
773 #define CONFIG_ENV_SECT_SIZE	0x10000
774 #elif defined(CONFIG_SDCARD)
775 #define CONFIG_FSL_FIXED_MMC_LOCATION
776 #define CONFIG_ENV_SIZE		0x2000
777 #define CONFIG_SYS_MMC_ENV_DEV	0
778 #elif defined(CONFIG_NAND)
779 #ifdef CONFIG_TPL_BUILD
780 #define CONFIG_ENV_SIZE		0x2000
781 #define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
782 #else
783 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
784 #endif
785 #define CONFIG_ENV_OFFSET	(1024 * 1024)
786 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
787 #elif defined(CONFIG_SYS_RAMBOOT)
788 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
789 #define CONFIG_ENV_SIZE		0x2000
790 #else
791 #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
792 #define CONFIG_ENV_SIZE		0x2000
793 #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
794 #endif
795 
796 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
797 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
798 
799 /*
800  * USB
801  */
802 #define CONFIG_HAS_FSL_DR_USB
803 
804 #if defined(CONFIG_HAS_FSL_DR_USB)
805 #ifdef CONFIG_USB_EHCI_HCD
806 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
807 #define CONFIG_USB_EHCI_FSL
808 #endif
809 #endif
810 
811 #if defined(CONFIG_TARGET_P1020RDB_PD)
812 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
813 #endif
814 
815 #ifdef CONFIG_MMC
816 #define CONFIG_FSL_ESDHC
817 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
818 #endif
819 
820 #undef CONFIG_WATCHDOG	/* watchdog disabled */
821 
822 /*
823  * Miscellaneous configurable options
824  */
825 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
826 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
827 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
828 #if defined(CONFIG_CMD_KGDB)
829 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
830 #else
831 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
832 #endif
833 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
834 	/* Print Buffer Size */
835 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
836 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
837 
838 /*
839  * For booting Linux, the board info and command line data
840  * have to be in the first 64 MB of memory, since this is
841  * the maximum mapped by the Linux kernel during initialization.
842  */
843 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
844 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
845 
846 #if defined(CONFIG_CMD_KGDB)
847 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
848 #endif
849 
850 /*
851  * Environment Configuration
852  */
853 #define CONFIG_HOSTNAME		unknown
854 #define CONFIG_ROOTPATH		"/opt/nfsroot"
855 #define CONFIG_BOOTFILE		"uImage"
856 #define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
857 
858 /* default location for tftp and bootm */
859 #define CONFIG_LOADADDR	1000000
860 
861 #ifdef __SW_BOOT_NOR
862 #define __NOR_RST_CMD	\
863 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
864 i2c mw 18 3 __SW_BOOT_MASK 1; reset
865 #endif
866 #ifdef __SW_BOOT_SPI
867 #define __SPI_RST_CMD	\
868 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
869 i2c mw 18 3 __SW_BOOT_MASK 1; reset
870 #endif
871 #ifdef __SW_BOOT_SD
872 #define __SD_RST_CMD	\
873 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
874 i2c mw 18 3 __SW_BOOT_MASK 1; reset
875 #endif
876 #ifdef __SW_BOOT_NAND
877 #define __NAND_RST_CMD	\
878 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
879 i2c mw 18 3 __SW_BOOT_MASK 1; reset
880 #endif
881 #ifdef __SW_BOOT_PCIE
882 #define __PCIE_RST_CMD	\
883 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
884 i2c mw 18 3 __SW_BOOT_MASK 1; reset
885 #endif
886 
887 #define	CONFIG_EXTRA_ENV_SETTINGS	\
888 "netdev=eth0\0"	\
889 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"	\
890 "loadaddr=1000000\0"	\
891 "bootfile=uImage\0"	\
892 "tftpflash=tftpboot $loadaddr $uboot; "	\
893 	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
894 	"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
895 	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
896 	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
897 	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
898 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
899 "consoledev=ttyS0\0"	\
900 "ramdiskaddr=2000000\0"	\
901 "ramdiskfile=rootfs.ext2.gz.uboot\0"	\
902 "fdtaddr=1e00000\0"	\
903 "bdev=sda1\0" \
904 "jffs2nor=mtdblock3\0"	\
905 "norbootaddr=ef080000\0"	\
906 "norfdtaddr=ef040000\0"	\
907 "jffs2nand=mtdblock9\0"	\
908 "nandbootaddr=100000\0"	\
909 "nandfdtaddr=80000\0"		\
910 "ramdisk_size=120000\0"	\
911 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
912 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
913 __stringify(__NOR_RST_CMD)"\0" \
914 __stringify(__SPI_RST_CMD)"\0" \
915 __stringify(__SD_RST_CMD)"\0" \
916 __stringify(__NAND_RST_CMD)"\0" \
917 __stringify(__PCIE_RST_CMD)"\0"
918 
919 #define CONFIG_NFSBOOTCOMMAND	\
920 "setenv bootargs root=/dev/nfs rw "	\
921 "nfsroot=$serverip:$rootpath "	\
922 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
923 "console=$consoledev,$baudrate $othbootargs;" \
924 "tftp $loadaddr $bootfile;"	\
925 "tftp $fdtaddr $fdtfile;"	\
926 "bootm $loadaddr - $fdtaddr"
927 
928 #define CONFIG_HDBOOT	\
929 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "	\
930 "console=$consoledev,$baudrate $othbootargs;" \
931 "usb start;"	\
932 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"	\
933 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"	\
934 "bootm $loadaddr - $fdtaddr"
935 
936 #define CONFIG_USB_FAT_BOOT	\
937 "setenv bootargs root=/dev/ram rw "	\
938 "console=$consoledev,$baudrate $othbootargs " \
939 "ramdisk_size=$ramdisk_size;"	\
940 "usb start;"	\
941 "fatload usb 0:2 $loadaddr $bootfile;"	\
942 "fatload usb 0:2 $fdtaddr $fdtfile;"	\
943 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"	\
944 "bootm $loadaddr $ramdiskaddr $fdtaddr"
945 
946 #define CONFIG_USB_EXT2_BOOT	\
947 "setenv bootargs root=/dev/ram rw "	\
948 "console=$consoledev,$baudrate $othbootargs " \
949 "ramdisk_size=$ramdisk_size;"	\
950 "usb start;"	\
951 "ext2load usb 0:4 $loadaddr $bootfile;"	\
952 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
953 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
954 "bootm $loadaddr $ramdiskaddr $fdtaddr"
955 
956 #define CONFIG_NORBOOT	\
957 "setenv bootargs root=/dev/$jffs2nor rw "	\
958 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
959 "bootm $norbootaddr - $norfdtaddr"
960 
961 #define CONFIG_RAMBOOTCOMMAND	\
962 "setenv bootargs root=/dev/ram rw "	\
963 "console=$consoledev,$baudrate $othbootargs " \
964 "ramdisk_size=$ramdisk_size;"	\
965 "tftp $ramdiskaddr $ramdiskfile;"	\
966 "tftp $loadaddr $bootfile;"	\
967 "tftp $fdtaddr $fdtfile;"	\
968 "bootm $loadaddr $ramdiskaddr $fdtaddr"
969 
970 #define CONFIG_BOOTCOMMAND	CONFIG_HDBOOT
971 
972 #endif /* __CONFIG_H */
973