1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * QorIQ RDB boards configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #ifdef CONFIG_36BIT 14 #define CONFIG_PHYS_64BIT 15 #endif 16 17 #if defined(CONFIG_P1020MBG) 18 #define CONFIG_BOARDNAME "P1020MBG-PC" 19 #define CONFIG_P1020 20 #define CONFIG_VSC7385_ENET 21 #define CONFIG_SLIC 22 #define __SW_BOOT_MASK 0x03 23 #define __SW_BOOT_NOR 0xe4 24 #define __SW_BOOT_SD 0x54 25 #define CONFIG_SYS_L2_SIZE (256 << 10) 26 #endif 27 28 #if defined(CONFIG_P1020UTM) 29 #define CONFIG_BOARDNAME "P1020UTM-PC" 30 #define CONFIG_P1020 31 #define __SW_BOOT_MASK 0x03 32 #define __SW_BOOT_NOR 0xe0 33 #define __SW_BOOT_SD 0x50 34 #define CONFIG_SYS_L2_SIZE (256 << 10) 35 #endif 36 37 #if defined(CONFIG_P1020RDB_PC) 38 #define CONFIG_BOARDNAME "P1020RDB-PC" 39 #define CONFIG_NAND_FSL_ELBC 40 #define CONFIG_P1020 41 #define CONFIG_SPI_FLASH 42 #define CONFIG_VSC7385_ENET 43 #define CONFIG_SLIC 44 #define __SW_BOOT_MASK 0x03 45 #define __SW_BOOT_NOR 0x5c 46 #define __SW_BOOT_SPI 0x1c 47 #define __SW_BOOT_SD 0x9c 48 #define __SW_BOOT_NAND 0xec 49 #define __SW_BOOT_PCIE 0x6c 50 #define CONFIG_SYS_L2_SIZE (256 << 10) 51 #endif 52 53 /* 54 * P1020RDB-PD board has user selectable switches for evaluating different 55 * frequency and boot options for the P1020 device. The table that 56 * follow describe the available options. The front six binary number was in 57 * accordance with SW3[1:6]. 58 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 59 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 60 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 61 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 62 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 63 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 64 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 65 */ 66 #if defined(CONFIG_P1020RDB_PD) 67 #define CONFIG_BOARDNAME "P1020RDB-PD" 68 #define CONFIG_NAND_FSL_ELBC 69 #define CONFIG_P1020 70 #define CONFIG_SPI_FLASH 71 #define CONFIG_VSC7385_ENET 72 #define CONFIG_SLIC 73 #define __SW_BOOT_MASK 0x03 74 #define __SW_BOOT_NOR 0x64 75 #define __SW_BOOT_SPI 0x34 76 #define __SW_BOOT_SD 0x24 77 #define __SW_BOOT_NAND 0x44 78 #define __SW_BOOT_PCIE 0x74 79 #define CONFIG_SYS_L2_SIZE (256 << 10) 80 #endif 81 82 #if defined(CONFIG_P1021RDB) 83 #define CONFIG_BOARDNAME "P1021RDB-PC" 84 #define CONFIG_NAND_FSL_ELBC 85 #define CONFIG_P1021 86 #define CONFIG_QE 87 #define CONFIG_SPI_FLASH 88 #define CONFIG_VSC7385_ENET 89 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 90 addresses in the LBC */ 91 #define __SW_BOOT_MASK 0x03 92 #define __SW_BOOT_NOR 0x5c 93 #define __SW_BOOT_SPI 0x1c 94 #define __SW_BOOT_SD 0x9c 95 #define __SW_BOOT_NAND 0xec 96 #define __SW_BOOT_PCIE 0x6c 97 #define CONFIG_SYS_L2_SIZE (256 << 10) 98 #endif 99 100 #if defined(CONFIG_P1024RDB) 101 #define CONFIG_BOARDNAME "P1024RDB" 102 #define CONFIG_NAND_FSL_ELBC 103 #define CONFIG_P1024 104 #define CONFIG_SLIC 105 #define CONFIG_SPI_FLASH 106 #define __SW_BOOT_MASK 0xf3 107 #define __SW_BOOT_NOR 0x00 108 #define __SW_BOOT_SPI 0x08 109 #define __SW_BOOT_SD 0x04 110 #define __SW_BOOT_NAND 0x0c 111 #define CONFIG_SYS_L2_SIZE (256 << 10) 112 #endif 113 114 #if defined(CONFIG_P1025RDB) 115 #define CONFIG_BOARDNAME "P1025RDB" 116 #define CONFIG_NAND_FSL_ELBC 117 #define CONFIG_P1025 118 #define CONFIG_QE 119 #define CONFIG_SLIC 120 #define CONFIG_SPI_FLASH 121 122 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 123 addresses in the LBC */ 124 #define __SW_BOOT_MASK 0xf3 125 #define __SW_BOOT_NOR 0x00 126 #define __SW_BOOT_SPI 0x08 127 #define __SW_BOOT_SD 0x04 128 #define __SW_BOOT_NAND 0x0c 129 #define CONFIG_SYS_L2_SIZE (256 << 10) 130 #endif 131 132 #if defined(CONFIG_P2020RDB) 133 #define CONFIG_BOARDNAME "P2020RDB-PCA" 134 #define CONFIG_NAND_FSL_ELBC 135 #define CONFIG_P2020 136 #define CONFIG_SPI_FLASH 137 #define CONFIG_VSC7385_ENET 138 #define __SW_BOOT_MASK 0x03 139 #define __SW_BOOT_NOR 0xc8 140 #define __SW_BOOT_SPI 0x28 141 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 142 #define __SW_BOOT_NAND 0xe8 143 #define __SW_BOOT_PCIE 0xa8 144 #define CONFIG_SYS_L2_SIZE (512 << 10) 145 #endif 146 147 #ifdef CONFIG_SDCARD 148 #define CONFIG_SPL 149 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 150 #define CONFIG_SPL_ENV_SUPPORT 151 #define CONFIG_SPL_SERIAL_SUPPORT 152 #define CONFIG_SPL_MMC_SUPPORT 153 #define CONFIG_SPL_MMC_MINIMAL 154 #define CONFIG_SPL_FLUSH_IMAGE 155 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 156 #define CONFIG_SPL_LIBGENERIC_SUPPORT 157 #define CONFIG_SPL_LIBCOMMON_SUPPORT 158 #define CONFIG_SPL_I2C_SUPPORT 159 #define CONFIG_FSL_LAW /* Use common FSL init code */ 160 #define CONFIG_SYS_TEXT_BASE 0x11001000 161 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 162 #define CONFIG_SPL_PAD_TO 0x18000 163 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 164 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) 165 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 166 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 167 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) 168 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 169 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 170 #define CONFIG_SPL_MMC_BOOT 171 #ifdef CONFIG_SPL_BUILD 172 #define CONFIG_SPL_COMMON_INIT_DDR 173 #endif 174 #endif 175 176 #ifdef CONFIG_SPIFLASH 177 #define CONFIG_SPL 178 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 179 #define CONFIG_SPL_ENV_SUPPORT 180 #define CONFIG_SPL_SERIAL_SUPPORT 181 #define CONFIG_SPL_SPI_SUPPORT 182 #define CONFIG_SPL_SPI_FLASH_SUPPORT 183 #define CONFIG_SPL_SPI_FLASH_MINIMAL 184 #define CONFIG_SPL_FLUSH_IMAGE 185 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 186 #define CONFIG_SPL_LIBGENERIC_SUPPORT 187 #define CONFIG_SPL_LIBCOMMON_SUPPORT 188 #define CONFIG_SPL_I2C_SUPPORT 189 #define CONFIG_FSL_LAW /* Use common FSL init code */ 190 #define CONFIG_SYS_TEXT_BASE 0x11001000 191 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 192 #define CONFIG_SPL_PAD_TO 0x18000 193 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 194 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) 195 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 196 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 197 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) 198 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 199 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 200 #define CONFIG_SPL_SPI_BOOT 201 #ifdef CONFIG_SPL_BUILD 202 #define CONFIG_SPL_COMMON_INIT_DDR 203 #endif 204 #endif 205 206 #ifdef CONFIG_NAND 207 #define CONFIG_SPL 208 #define CONFIG_TPL 209 #ifdef CONFIG_TPL_BUILD 210 #define CONFIG_SPL_NAND_BOOT 211 #define CONFIG_SPL_FLUSH_IMAGE 212 #define CONFIG_SPL_ENV_SUPPORT 213 #define CONFIG_SPL_NAND_INIT 214 #define CONFIG_SPL_SERIAL_SUPPORT 215 #define CONFIG_SPL_LIBGENERIC_SUPPORT 216 #define CONFIG_SPL_LIBCOMMON_SUPPORT 217 #define CONFIG_SPL_I2C_SUPPORT 218 #define CONFIG_SPL_NAND_SUPPORT 219 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 220 #define CONFIG_SPL_COMMON_INIT_DDR 221 #define CONFIG_SPL_MAX_SIZE (128 << 10) 222 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 223 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 224 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) 225 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 226 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 227 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 228 #elif defined(CONFIG_SPL_BUILD) 229 #define CONFIG_SPL_INIT_MINIMAL 230 #define CONFIG_SPL_SERIAL_SUPPORT 231 #define CONFIG_SPL_NAND_SUPPORT 232 #define CONFIG_SPL_FLUSH_IMAGE 233 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 234 #define CONFIG_SPL_TEXT_BASE 0xff800000 235 #define CONFIG_SPL_MAX_SIZE 4096 236 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 237 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 238 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 239 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 240 #endif /* not CONFIG_TPL_BUILD */ 241 242 #define CONFIG_SPL_PAD_TO 0x20000 243 #define CONFIG_TPL_PAD_TO 0x20000 244 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 245 #define CONFIG_SYS_TEXT_BASE 0x11001000 246 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 247 #endif 248 249 #ifndef CONFIG_SYS_TEXT_BASE 250 #define CONFIG_SYS_TEXT_BASE 0xeff80000 251 #endif 252 253 #ifndef CONFIG_RESET_VECTOR_ADDRESS 254 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 255 #endif 256 257 #ifndef CONFIG_SYS_MONITOR_BASE 258 #ifdef CONFIG_SPL_BUILD 259 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 260 #else 261 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 262 #endif 263 #endif 264 265 /* High Level Configuration Options */ 266 #define CONFIG_BOOKE 267 #define CONFIG_E500 268 #define CONFIG_MPC85xx 269 270 #define CONFIG_MP 271 272 #define CONFIG_FSL_ELBC 273 #define CONFIG_PCI 274 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 275 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 276 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 277 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 278 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 279 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 280 281 #define CONFIG_FSL_LAW 282 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 283 #define CONFIG_ENV_OVERWRITE 284 285 #define CONFIG_CMD_SATA 286 #define CONFIG_SATA_SIL 287 #define CONFIG_SYS_SATA_MAX_DEVICE 2 288 #define CONFIG_LIBATA 289 #define CONFIG_LBA48 290 291 #if defined(CONFIG_P2020RDB) 292 #define CONFIG_SYS_CLK_FREQ 100000000 293 #else 294 #define CONFIG_SYS_CLK_FREQ 66666666 295 #endif 296 #define CONFIG_DDR_CLK_FREQ 66666666 297 298 #define CONFIG_HWCONFIG 299 /* 300 * These can be toggled for performance analysis, otherwise use default. 301 */ 302 #define CONFIG_L2_CACHE 303 #define CONFIG_BTB 304 305 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 306 307 #define CONFIG_ENABLE_36BIT_PHYS 308 309 #ifdef CONFIG_PHYS_64BIT 310 #define CONFIG_ADDR_MAP 1 311 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 312 #endif 313 314 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 315 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 316 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 317 318 #define CONFIG_SYS_CCSRBAR 0xffe00000 319 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 320 321 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 322 SPL code*/ 323 #ifdef CONFIG_SPL_BUILD 324 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 325 #endif 326 327 /* DDR Setup */ 328 #define CONFIG_FSL_DDR3 329 #define CONFIG_SYS_DDR_RAW_TIMING 330 #define CONFIG_DDR_SPD 331 #define CONFIG_SYS_SPD_BUS_NUM 1 332 #define SPD_EEPROM_ADDRESS 0x52 333 #undef CONFIG_FSL_DDR_INTERACTIVE 334 335 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 336 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 337 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 338 #else 339 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 340 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 341 #endif 342 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 343 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 344 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 345 346 #define CONFIG_NUM_DDR_CONTROLLERS 1 347 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 348 349 /* Default settings for DDR3 */ 350 #ifndef CONFIG_P2020RDB 351 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 352 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 353 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 354 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 355 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 356 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 357 358 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 359 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 360 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 361 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 362 363 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 364 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 365 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 366 #define CONFIG_SYS_DDR_RCW_1 0x00000000 367 #define CONFIG_SYS_DDR_RCW_2 0x00000000 368 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 369 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 370 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 371 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 372 373 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 374 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 375 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 376 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 377 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 378 #define CONFIG_SYS_DDR_MODE_1 0x40461520 379 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 380 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 381 #endif 382 383 #undef CONFIG_CLOCKS_IN_MHZ 384 385 /* 386 * Memory map 387 * 388 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 389 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 390 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 391 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 392 * (early boot only) 393 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 394 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 395 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 396 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 397 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 398 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 399 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 400 */ 401 402 403 /* 404 * Local Bus Definitions 405 */ 406 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 407 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 408 #define CONFIG_SYS_FLASH_BASE 0xec000000 409 #elif defined(CONFIG_P1020UTM) 410 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 411 #define CONFIG_SYS_FLASH_BASE 0xee000000 412 #else 413 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 414 #define CONFIG_SYS_FLASH_BASE 0xef000000 415 #endif 416 417 418 #ifdef CONFIG_PHYS_64BIT 419 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 420 #else 421 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 422 #endif 423 424 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 425 | BR_PS_16 | BR_V) 426 427 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 428 429 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 430 #define CONFIG_SYS_FLASH_QUIET_TEST 431 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 432 433 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 434 435 #undef CONFIG_SYS_FLASH_CHECKSUM 436 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 437 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 438 439 #define CONFIG_FLASH_CFI_DRIVER 440 #define CONFIG_SYS_FLASH_CFI 441 #define CONFIG_SYS_FLASH_EMPTY_INFO 442 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 443 444 /* Nand Flash */ 445 #ifdef CONFIG_NAND_FSL_ELBC 446 #define CONFIG_SYS_NAND_BASE 0xff800000 447 #ifdef CONFIG_PHYS_64BIT 448 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 449 #else 450 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 451 #endif 452 453 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 454 #define CONFIG_SYS_MAX_NAND_DEVICE 1 455 #define CONFIG_MTD_NAND_VERIFY_WRITE 456 #define CONFIG_CMD_NAND 457 #if defined(CONFIG_P1020RDB_PD) 458 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 459 #else 460 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 461 #endif 462 463 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 464 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 465 | BR_PS_8 /* Port Size = 8 bit */ \ 466 | BR_MS_FCM /* MSEL = FCM */ \ 467 | BR_V) /* valid */ 468 #if defined(CONFIG_P1020RDB_PD) 469 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 470 | OR_FCM_PGS /* Large Page*/ \ 471 | OR_FCM_CSCT \ 472 | OR_FCM_CST \ 473 | OR_FCM_CHT \ 474 | OR_FCM_SCY_1 \ 475 | OR_FCM_TRLX \ 476 | OR_FCM_EHTR) 477 #else 478 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 479 | OR_FCM_CSCT \ 480 | OR_FCM_CST \ 481 | OR_FCM_CHT \ 482 | OR_FCM_SCY_1 \ 483 | OR_FCM_TRLX \ 484 | OR_FCM_EHTR) 485 #endif 486 #endif /* CONFIG_NAND_FSL_ELBC */ 487 488 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 489 490 #define CONFIG_SYS_INIT_RAM_LOCK 491 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 492 #ifdef CONFIG_PHYS_64BIT 493 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 494 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 495 /* The assembler doesn't like typecast */ 496 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 497 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 498 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 499 #else 500 /* Initial L1 address */ 501 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 502 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 503 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 504 #endif 505 /* Size of used area in RAM */ 506 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 507 508 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 509 GENERATED_GBL_DATA_SIZE) 510 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 511 512 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ 513 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 514 515 #define CONFIG_SYS_CPLD_BASE 0xffa00000 516 #ifdef CONFIG_PHYS_64BIT 517 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 518 #else 519 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 520 #endif 521 /* CPLD config size: 1Mb */ 522 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 523 BR_PS_8 | BR_V) 524 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 525 526 #define CONFIG_SYS_PMC_BASE 0xff980000 527 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 528 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 529 BR_PS_8 | BR_V) 530 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 531 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 532 OR_GPCM_EAD) 533 534 #ifdef CONFIG_NAND 535 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 536 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 537 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 538 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 539 #else 540 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 541 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 542 #ifdef CONFIG_NAND_FSL_ELBC 543 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 544 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 545 #endif 546 #endif 547 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 548 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 549 550 551 /* Vsc7385 switch */ 552 #ifdef CONFIG_VSC7385_ENET 553 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 554 555 #ifdef CONFIG_PHYS_64BIT 556 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 557 #else 558 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 559 #endif 560 561 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 562 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 563 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 564 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 565 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 566 567 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 568 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 569 570 /* The size of the VSC7385 firmware image */ 571 #define CONFIG_VSC7385_IMAGE_SIZE 8192 572 #endif 573 574 /* 575 * Config the L2 Cache as L2 SRAM 576 */ 577 #if defined(CONFIG_SPL_BUILD) 578 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 579 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 580 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 581 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 582 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 583 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 584 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 585 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) 586 #define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) 587 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 588 #elif defined(CONFIG_NAND) 589 #ifdef CONFIG_TPL_BUILD 590 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 591 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 592 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 593 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 594 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 595 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 596 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 597 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 598 #else 599 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 600 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 601 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 602 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 603 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 604 #endif /* CONFIG_TPL_BUILD */ 605 #endif 606 #endif 607 608 /* Serial Port - controlled on board with jumper J8 609 * open - index 2 610 * shorted - index 1 611 */ 612 #define CONFIG_CONS_INDEX 1 613 #undef CONFIG_SERIAL_SOFTWARE_FIFO 614 #define CONFIG_SYS_NS16550 615 #define CONFIG_SYS_NS16550_SERIAL 616 #define CONFIG_SYS_NS16550_REG_SIZE 1 617 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 618 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 619 #define CONFIG_NS16550_MIN_FUNCTIONS 620 #endif 621 622 #define CONFIG_SYS_BAUDRATE_TABLE \ 623 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 624 625 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 626 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 627 628 /* Use the HUSH parser */ 629 #define CONFIG_SYS_HUSH_PARSER 630 631 /* 632 * Pass open firmware flat tree 633 */ 634 #define CONFIG_OF_LIBFDT 635 #define CONFIG_OF_BOARD_SETUP 636 #define CONFIG_OF_STDOUT_VIA_ALIAS 637 638 /* new uImage format support */ 639 #define CONFIG_FIT 640 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 641 642 /* I2C */ 643 #define CONFIG_SYS_I2C 644 #define CONFIG_SYS_I2C_FSL 645 #define CONFIG_SYS_FSL_I2C_SPEED 400000 646 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 647 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 648 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 649 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 650 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 651 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 652 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 653 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 654 655 /* 656 * I2C2 EEPROM 657 */ 658 #undef CONFIG_ID_EEPROM 659 660 #define CONFIG_RTC_PT7C4338 661 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 662 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 663 664 /* enable read and write access to EEPROM */ 665 #define CONFIG_CMD_EEPROM 666 #define CONFIG_SYS_I2C_MULTI_EEPROMS 667 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 668 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 669 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 670 671 /* 672 * eSPI - Enhanced SPI 673 */ 674 #define CONFIG_HARD_SPI 675 #define CONFIG_FSL_ESPI 676 677 #if defined(CONFIG_SPI_FLASH) 678 #define CONFIG_SPI_FLASH_SPANSION 679 #define CONFIG_CMD_SF 680 #define CONFIG_SF_DEFAULT_SPEED 10000000 681 #define CONFIG_SF_DEFAULT_MODE 0 682 #endif 683 684 #if defined(CONFIG_PCI) 685 /* 686 * General PCI 687 * Memory space is mapped 1-1, but I/O space must start from 0. 688 */ 689 690 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 691 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 692 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 693 #ifdef CONFIG_PHYS_64BIT 694 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 695 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 696 #else 697 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 698 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 699 #endif 700 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 701 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 702 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 703 #ifdef CONFIG_PHYS_64BIT 704 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 705 #else 706 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 707 #endif 708 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 709 710 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 711 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 712 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 713 #ifdef CONFIG_PHYS_64BIT 714 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 715 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 716 #else 717 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 718 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 719 #endif 720 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 721 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 722 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 723 #ifdef CONFIG_PHYS_64BIT 724 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 725 #else 726 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 727 #endif 728 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 729 730 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 731 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ 732 #define CONFIG_CMD_PCI 733 #define CONFIG_CMD_NET 734 735 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 736 #define CONFIG_DOS_PARTITION 737 #endif /* CONFIG_PCI */ 738 739 #if defined(CONFIG_TSEC_ENET) 740 #define CONFIG_MII /* MII PHY management */ 741 #define CONFIG_TSEC1 742 #define CONFIG_TSEC1_NAME "eTSEC1" 743 #define CONFIG_TSEC2 744 #define CONFIG_TSEC2_NAME "eTSEC2" 745 #define CONFIG_TSEC3 746 #define CONFIG_TSEC3_NAME "eTSEC3" 747 748 #define TSEC1_PHY_ADDR 2 749 #define TSEC2_PHY_ADDR 0 750 #define TSEC3_PHY_ADDR 1 751 752 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 753 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 754 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 755 756 #define TSEC1_PHYIDX 0 757 #define TSEC2_PHYIDX 0 758 #define TSEC3_PHYIDX 0 759 760 #define CONFIG_ETHPRIME "eTSEC1" 761 762 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 763 764 #define CONFIG_HAS_ETH0 765 #define CONFIG_HAS_ETH1 766 #define CONFIG_HAS_ETH2 767 #endif /* CONFIG_TSEC_ENET */ 768 769 #ifdef CONFIG_QE 770 /* QE microcode/firmware address */ 771 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 772 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 773 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 774 #endif /* CONFIG_QE */ 775 776 #ifdef CONFIG_P1025RDB 777 /* 778 * QE UEC ethernet configuration 779 */ 780 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 781 782 #undef CONFIG_UEC_ETH 783 #define CONFIG_PHY_MODE_NEED_CHANGE 784 785 #define CONFIG_UEC_ETH1 /* ETH1 */ 786 #define CONFIG_HAS_ETH0 787 788 #ifdef CONFIG_UEC_ETH1 789 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 790 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 791 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 792 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 793 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 794 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 795 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 796 #endif /* CONFIG_UEC_ETH1 */ 797 798 #define CONFIG_UEC_ETH5 /* ETH5 */ 799 #define CONFIG_HAS_ETH1 800 801 #ifdef CONFIG_UEC_ETH5 802 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 803 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 804 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 805 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 806 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 807 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 808 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 809 #endif /* CONFIG_UEC_ETH5 */ 810 #endif /* CONFIG_P1025RDB */ 811 812 /* 813 * Environment 814 */ 815 #ifdef CONFIG_SPIFLASH 816 #define CONFIG_ENV_IS_IN_SPI_FLASH 817 #define CONFIG_ENV_SPI_BUS 0 818 #define CONFIG_ENV_SPI_CS 0 819 #define CONFIG_ENV_SPI_MAX_HZ 10000000 820 #define CONFIG_ENV_SPI_MODE 0 821 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 822 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 823 #define CONFIG_ENV_SECT_SIZE 0x10000 824 #elif defined(CONFIG_SDCARD) 825 #define CONFIG_ENV_IS_IN_MMC 826 #define CONFIG_FSL_FIXED_MMC_LOCATION 827 #define CONFIG_ENV_SIZE 0x2000 828 #define CONFIG_SYS_MMC_ENV_DEV 0 829 #elif defined(CONFIG_NAND) 830 #ifdef CONFIG_TPL_BUILD 831 #define CONFIG_ENV_SIZE 0x2000 832 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 833 #else 834 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 835 #endif 836 #define CONFIG_ENV_IS_IN_NAND 837 #define CONFIG_ENV_OFFSET (1024 * 1024) 838 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 839 #elif defined(CONFIG_SYS_RAMBOOT) 840 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 841 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 842 #define CONFIG_ENV_SIZE 0x2000 843 #else 844 #define CONFIG_ENV_IS_IN_FLASH 845 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 846 #define CONFIG_ENV_ADDR 0xfff80000 847 #else 848 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 849 #endif 850 #define CONFIG_ENV_SIZE 0x2000 851 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 852 #endif 853 854 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 855 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 856 857 /* 858 * Command line configuration. 859 */ 860 #include <config_cmd_default.h> 861 862 #define CONFIG_CMD_IRQ 863 #define CONFIG_CMD_PING 864 #define CONFIG_CMD_I2C 865 #define CONFIG_CMD_MII 866 #define CONFIG_CMD_DATE 867 #define CONFIG_CMD_ELF 868 #define CONFIG_CMD_SETEXPR 869 #define CONFIG_CMD_REGINFO 870 871 /* 872 * USB 873 */ 874 #define CONFIG_HAS_FSL_DR_USB 875 876 #if defined(CONFIG_HAS_FSL_DR_USB) 877 #define CONFIG_USB_EHCI 878 879 #ifdef CONFIG_USB_EHCI 880 #define CONFIG_CMD_USB 881 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 882 #define CONFIG_USB_EHCI_FSL 883 #define CONFIG_USB_STORAGE 884 #endif 885 #endif 886 887 #define CONFIG_MMC 888 889 #ifdef CONFIG_MMC 890 #define CONFIG_FSL_ESDHC 891 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 892 #define CONFIG_CMD_MMC 893 #define CONFIG_GENERIC_MMC 894 #endif 895 896 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 897 || defined(CONFIG_FSL_SATA) 898 #define CONFIG_CMD_EXT2 899 #define CONFIG_CMD_FAT 900 #define CONFIG_DOS_PARTITION 901 #endif 902 903 #undef CONFIG_WATCHDOG /* watchdog disabled */ 904 905 /* 906 * Miscellaneous configurable options 907 */ 908 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 909 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 910 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 911 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 912 #if defined(CONFIG_CMD_KGDB) 913 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 914 #else 915 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 916 #endif 917 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 918 /* Print Buffer Size */ 919 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 920 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 921 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ 922 923 /* 924 * For booting Linux, the board info and command line data 925 * have to be in the first 64 MB of memory, since this is 926 * the maximum mapped by the Linux kernel during initialization. 927 */ 928 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 929 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 930 931 #if defined(CONFIG_CMD_KGDB) 932 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 933 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 934 #endif 935 936 /* 937 * Environment Configuration 938 */ 939 #define CONFIG_HOSTNAME unknown 940 #define CONFIG_ROOTPATH "/opt/nfsroot" 941 #define CONFIG_BOOTFILE "uImage" 942 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 943 944 /* default location for tftp and bootm */ 945 #define CONFIG_LOADADDR 1000000 946 947 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 948 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 949 950 #define CONFIG_BAUDRATE 115200 951 952 #ifdef __SW_BOOT_NOR 953 #define __NOR_RST_CMD \ 954 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 955 i2c mw 18 3 __SW_BOOT_MASK 1; reset 956 #endif 957 #ifdef __SW_BOOT_SPI 958 #define __SPI_RST_CMD \ 959 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 960 i2c mw 18 3 __SW_BOOT_MASK 1; reset 961 #endif 962 #ifdef __SW_BOOT_SD 963 #define __SD_RST_CMD \ 964 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 965 i2c mw 18 3 __SW_BOOT_MASK 1; reset 966 #endif 967 #ifdef __SW_BOOT_NAND 968 #define __NAND_RST_CMD \ 969 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 970 i2c mw 18 3 __SW_BOOT_MASK 1; reset 971 #endif 972 #ifdef __SW_BOOT_PCIE 973 #define __PCIE_RST_CMD \ 974 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 975 i2c mw 18 3 __SW_BOOT_MASK 1; reset 976 #endif 977 978 #define CONFIG_EXTRA_ENV_SETTINGS \ 979 "netdev=eth0\0" \ 980 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 981 "loadaddr=1000000\0" \ 982 "bootfile=uImage\0" \ 983 "tftpflash=tftpboot $loadaddr $uboot; " \ 984 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 985 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 986 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 987 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 988 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 989 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 990 "consoledev=ttyS0\0" \ 991 "ramdiskaddr=2000000\0" \ 992 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 993 "fdtaddr=c00000\0" \ 994 "bdev=sda1\0" \ 995 "jffs2nor=mtdblock3\0" \ 996 "norbootaddr=ef080000\0" \ 997 "norfdtaddr=ef040000\0" \ 998 "jffs2nand=mtdblock9\0" \ 999 "nandbootaddr=100000\0" \ 1000 "nandfdtaddr=80000\0" \ 1001 "ramdisk_size=120000\0" \ 1002 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 1003 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 1004 __stringify(__NOR_RST_CMD)"\0" \ 1005 __stringify(__SPI_RST_CMD)"\0" \ 1006 __stringify(__SD_RST_CMD)"\0" \ 1007 __stringify(__NAND_RST_CMD)"\0" \ 1008 __stringify(__PCIE_RST_CMD)"\0" 1009 1010 #define CONFIG_NFSBOOTCOMMAND \ 1011 "setenv bootargs root=/dev/nfs rw " \ 1012 "nfsroot=$serverip:$rootpath " \ 1013 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 1014 "console=$consoledev,$baudrate $othbootargs;" \ 1015 "tftp $loadaddr $bootfile;" \ 1016 "tftp $fdtaddr $fdtfile;" \ 1017 "bootm $loadaddr - $fdtaddr" 1018 1019 #define CONFIG_HDBOOT \ 1020 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 1021 "console=$consoledev,$baudrate $othbootargs;" \ 1022 "usb start;" \ 1023 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 1024 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 1025 "bootm $loadaddr - $fdtaddr" 1026 1027 #define CONFIG_USB_FAT_BOOT \ 1028 "setenv bootargs root=/dev/ram rw " \ 1029 "console=$consoledev,$baudrate $othbootargs " \ 1030 "ramdisk_size=$ramdisk_size;" \ 1031 "usb start;" \ 1032 "fatload usb 0:2 $loadaddr $bootfile;" \ 1033 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 1034 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 1035 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1036 1037 #define CONFIG_USB_EXT2_BOOT \ 1038 "setenv bootargs root=/dev/ram rw " \ 1039 "console=$consoledev,$baudrate $othbootargs " \ 1040 "ramdisk_size=$ramdisk_size;" \ 1041 "usb start;" \ 1042 "ext2load usb 0:4 $loadaddr $bootfile;" \ 1043 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 1044 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 1045 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1046 1047 #define CONFIG_NORBOOT \ 1048 "setenv bootargs root=/dev/$jffs2nor rw " \ 1049 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 1050 "bootm $norbootaddr - $norfdtaddr" 1051 1052 #define CONFIG_RAMBOOTCOMMAND \ 1053 "setenv bootargs root=/dev/ram rw " \ 1054 "console=$consoledev,$baudrate $othbootargs " \ 1055 "ramdisk_size=$ramdisk_size;" \ 1056 "tftp $ramdiskaddr $ramdiskfile;" \ 1057 "tftp $loadaddr $bootfile;" \ 1058 "tftp $fdtaddr $fdtfile;" \ 1059 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1060 1061 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 1062 1063 #endif /* __CONFIG_H */ 1064