1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2010-2011 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * QorIQ RDB boards configuration file 8 */ 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #if defined(CONFIG_TARGET_P1020MBG) 13 #define CONFIG_BOARDNAME "P1020MBG-PC" 14 #define CONFIG_VSC7385_ENET 15 #define CONFIG_SLIC 16 #define __SW_BOOT_MASK 0x03 17 #define __SW_BOOT_NOR 0xe4 18 #define __SW_BOOT_SD 0x54 19 #define CONFIG_SYS_L2_SIZE (256 << 10) 20 #endif 21 22 #if defined(CONFIG_TARGET_P1020UTM) 23 #define CONFIG_BOARDNAME "P1020UTM-PC" 24 #define __SW_BOOT_MASK 0x03 25 #define __SW_BOOT_NOR 0xe0 26 #define __SW_BOOT_SD 0x50 27 #define CONFIG_SYS_L2_SIZE (256 << 10) 28 #endif 29 30 #if defined(CONFIG_TARGET_P1020RDB_PC) 31 #define CONFIG_BOARDNAME "P1020RDB-PC" 32 #define CONFIG_NAND_FSL_ELBC 33 #define CONFIG_VSC7385_ENET 34 #define CONFIG_SLIC 35 #define __SW_BOOT_MASK 0x03 36 #define __SW_BOOT_NOR 0x5c 37 #define __SW_BOOT_SPI 0x1c 38 #define __SW_BOOT_SD 0x9c 39 #define __SW_BOOT_NAND 0xec 40 #define __SW_BOOT_PCIE 0x6c 41 #define CONFIG_SYS_L2_SIZE (256 << 10) 42 #endif 43 44 /* 45 * P1020RDB-PD board has user selectable switches for evaluating different 46 * frequency and boot options for the P1020 device. The table that 47 * follow describe the available options. The front six binary number was in 48 * accordance with SW3[1:6]. 49 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 50 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 51 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 52 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 53 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 54 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 55 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 56 */ 57 #if defined(CONFIG_TARGET_P1020RDB_PD) 58 #define CONFIG_BOARDNAME "P1020RDB-PD" 59 #define CONFIG_NAND_FSL_ELBC 60 #define CONFIG_VSC7385_ENET 61 #define CONFIG_SLIC 62 #define __SW_BOOT_MASK 0x03 63 #define __SW_BOOT_NOR 0x64 64 #define __SW_BOOT_SPI 0x34 65 #define __SW_BOOT_SD 0x24 66 #define __SW_BOOT_NAND 0x44 67 #define __SW_BOOT_PCIE 0x74 68 #define CONFIG_SYS_L2_SIZE (256 << 10) 69 /* 70 * Dynamic MTD Partition support with mtdparts 71 */ 72 #endif 73 74 #if defined(CONFIG_TARGET_P1021RDB) 75 #define CONFIG_BOARDNAME "P1021RDB-PC" 76 #define CONFIG_NAND_FSL_ELBC 77 #define CONFIG_QE 78 #define CONFIG_VSC7385_ENET 79 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 80 addresses in the LBC */ 81 #define __SW_BOOT_MASK 0x03 82 #define __SW_BOOT_NOR 0x5c 83 #define __SW_BOOT_SPI 0x1c 84 #define __SW_BOOT_SD 0x9c 85 #define __SW_BOOT_NAND 0xec 86 #define __SW_BOOT_PCIE 0x6c 87 #define CONFIG_SYS_L2_SIZE (256 << 10) 88 /* 89 * Dynamic MTD Partition support with mtdparts 90 */ 91 #endif 92 93 #if defined(CONFIG_TARGET_P1024RDB) 94 #define CONFIG_BOARDNAME "P1024RDB" 95 #define CONFIG_NAND_FSL_ELBC 96 #define CONFIG_SLIC 97 #define __SW_BOOT_MASK 0xf3 98 #define __SW_BOOT_NOR 0x00 99 #define __SW_BOOT_SPI 0x08 100 #define __SW_BOOT_SD 0x04 101 #define __SW_BOOT_NAND 0x0c 102 #define CONFIG_SYS_L2_SIZE (256 << 10) 103 #endif 104 105 #if defined(CONFIG_TARGET_P1025RDB) 106 #define CONFIG_BOARDNAME "P1025RDB" 107 #define CONFIG_NAND_FSL_ELBC 108 #define CONFIG_QE 109 #define CONFIG_SLIC 110 111 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 112 addresses in the LBC */ 113 #define __SW_BOOT_MASK 0xf3 114 #define __SW_BOOT_NOR 0x00 115 #define __SW_BOOT_SPI 0x08 116 #define __SW_BOOT_SD 0x04 117 #define __SW_BOOT_NAND 0x0c 118 #define CONFIG_SYS_L2_SIZE (256 << 10) 119 #endif 120 121 #if defined(CONFIG_TARGET_P2020RDB) 122 #define CONFIG_BOARDNAME "P2020RDB-PC" 123 #define CONFIG_NAND_FSL_ELBC 124 #define CONFIG_VSC7385_ENET 125 #define __SW_BOOT_MASK 0x03 126 #define __SW_BOOT_NOR 0xc8 127 #define __SW_BOOT_SPI 0x28 128 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 129 #define __SW_BOOT_NAND 0xe8 130 #define __SW_BOOT_PCIE 0xa8 131 #define CONFIG_SYS_L2_SIZE (512 << 10) 132 /* 133 * Dynamic MTD Partition support with mtdparts 134 */ 135 #endif 136 137 #ifdef CONFIG_SDCARD 138 #define CONFIG_SPL_FLUSH_IMAGE 139 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 140 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 141 #define CONFIG_SPL_PAD_TO 0x20000 142 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 143 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 144 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 145 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 146 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 147 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 148 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 149 #define CONFIG_SPL_MMC_BOOT 150 #ifdef CONFIG_SPL_BUILD 151 #define CONFIG_SPL_COMMON_INIT_DDR 152 #endif 153 #endif 154 155 #ifdef CONFIG_SPIFLASH 156 #define CONFIG_SPL_SPI_FLASH_MINIMAL 157 #define CONFIG_SPL_FLUSH_IMAGE 158 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 159 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 160 #define CONFIG_SPL_PAD_TO 0x20000 161 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 162 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 163 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 164 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 165 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 166 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 167 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 168 #define CONFIG_SPL_SPI_BOOT 169 #ifdef CONFIG_SPL_BUILD 170 #define CONFIG_SPL_COMMON_INIT_DDR 171 #endif 172 #endif 173 174 #ifdef CONFIG_NAND 175 #ifdef CONFIG_TPL_BUILD 176 #define CONFIG_SPL_NAND_BOOT 177 #define CONFIG_SPL_FLUSH_IMAGE 178 #define CONFIG_SPL_NAND_INIT 179 #define CONFIG_SPL_COMMON_INIT_DDR 180 #define CONFIG_SPL_MAX_SIZE (128 << 10) 181 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 182 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 183 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 184 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 185 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 186 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 187 #elif defined(CONFIG_SPL_BUILD) 188 #define CONFIG_SPL_INIT_MINIMAL 189 #define CONFIG_SPL_FLUSH_IMAGE 190 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 191 #define CONFIG_SPL_TEXT_BASE 0xff800000 192 #define CONFIG_SPL_MAX_SIZE 4096 193 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 194 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 195 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 196 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 197 #endif /* not CONFIG_TPL_BUILD */ 198 199 #define CONFIG_SPL_PAD_TO 0x20000 200 #define CONFIG_TPL_PAD_TO 0x20000 201 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 202 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 203 #endif 204 205 #ifndef CONFIG_RESET_VECTOR_ADDRESS 206 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 207 #endif 208 209 #ifndef CONFIG_SYS_MONITOR_BASE 210 #ifdef CONFIG_SPL_BUILD 211 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 212 #else 213 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 214 #endif 215 #endif 216 217 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 218 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 219 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 220 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 221 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 222 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 223 224 #define CONFIG_ENV_OVERWRITE 225 226 #define CONFIG_SYS_SATA_MAX_DEVICE 2 227 #define CONFIG_LBA48 228 229 #if defined(CONFIG_TARGET_P2020RDB) 230 #define CONFIG_SYS_CLK_FREQ 100000000 231 #else 232 #define CONFIG_SYS_CLK_FREQ 66666666 233 #endif 234 #define CONFIG_DDR_CLK_FREQ 66666666 235 236 #define CONFIG_HWCONFIG 237 /* 238 * These can be toggled for performance analysis, otherwise use default. 239 */ 240 #define CONFIG_L2_CACHE 241 #define CONFIG_BTB 242 243 #define CONFIG_ENABLE_36BIT_PHYS 244 245 #ifdef CONFIG_PHYS_64BIT 246 #define CONFIG_ADDR_MAP 1 247 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 248 #endif 249 250 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 251 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 252 253 #define CONFIG_SYS_CCSRBAR 0xffe00000 254 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 255 256 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 257 SPL code*/ 258 #ifdef CONFIG_SPL_BUILD 259 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 260 #endif 261 262 /* DDR Setup */ 263 #define CONFIG_SYS_DDR_RAW_TIMING 264 #define CONFIG_DDR_SPD 265 #define CONFIG_SYS_SPD_BUS_NUM 1 266 #define SPD_EEPROM_ADDRESS 0x52 267 #undef CONFIG_FSL_DDR_INTERACTIVE 268 269 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 270 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 271 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 272 #else 273 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 274 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 275 #endif 276 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 277 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 278 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 279 280 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 281 282 /* Default settings for DDR3 */ 283 #ifndef CONFIG_TARGET_P2020RDB 284 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 285 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 286 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 287 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 288 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 289 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 290 291 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 292 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 293 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 294 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 295 296 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 297 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 298 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 299 #define CONFIG_SYS_DDR_RCW_1 0x00000000 300 #define CONFIG_SYS_DDR_RCW_2 0x00000000 301 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 302 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 303 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 304 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 305 306 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 307 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 308 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 309 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 310 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 311 #define CONFIG_SYS_DDR_MODE_1 0x40461520 312 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 313 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 314 #endif 315 316 #undef CONFIG_CLOCKS_IN_MHZ 317 318 /* 319 * Memory map 320 * 321 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 322 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 323 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 324 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 325 * (early boot only) 326 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 327 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 328 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 329 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 330 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 331 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 332 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 333 */ 334 335 /* 336 * Local Bus Definitions 337 */ 338 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 339 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 340 #define CONFIG_SYS_FLASH_BASE 0xec000000 341 #elif defined(CONFIG_TARGET_P1020UTM) 342 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 343 #define CONFIG_SYS_FLASH_BASE 0xee000000 344 #else 345 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 346 #define CONFIG_SYS_FLASH_BASE 0xef000000 347 #endif 348 349 #ifdef CONFIG_PHYS_64BIT 350 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 351 #else 352 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 353 #endif 354 355 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 356 | BR_PS_16 | BR_V) 357 358 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 359 360 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 361 #define CONFIG_SYS_FLASH_QUIET_TEST 362 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 363 364 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 365 366 #undef CONFIG_SYS_FLASH_CHECKSUM 367 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 368 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 369 370 #define CONFIG_SYS_FLASH_EMPTY_INFO 371 372 /* Nand Flash */ 373 #ifdef CONFIG_NAND_FSL_ELBC 374 #define CONFIG_SYS_NAND_BASE 0xff800000 375 #ifdef CONFIG_PHYS_64BIT 376 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 377 #else 378 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 379 #endif 380 381 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 382 #define CONFIG_SYS_MAX_NAND_DEVICE 1 383 #if defined(CONFIG_TARGET_P1020RDB_PD) 384 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 385 #else 386 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 387 #endif 388 389 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 390 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 391 | BR_PS_8 /* Port Size = 8 bit */ \ 392 | BR_MS_FCM /* MSEL = FCM */ \ 393 | BR_V) /* valid */ 394 #if defined(CONFIG_TARGET_P1020RDB_PD) 395 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 396 | OR_FCM_PGS /* Large Page*/ \ 397 | OR_FCM_CSCT \ 398 | OR_FCM_CST \ 399 | OR_FCM_CHT \ 400 | OR_FCM_SCY_1 \ 401 | OR_FCM_TRLX \ 402 | OR_FCM_EHTR) 403 #else 404 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 405 | OR_FCM_CSCT \ 406 | OR_FCM_CST \ 407 | OR_FCM_CHT \ 408 | OR_FCM_SCY_1 \ 409 | OR_FCM_TRLX \ 410 | OR_FCM_EHTR) 411 #endif 412 #endif /* CONFIG_NAND_FSL_ELBC */ 413 414 #define CONFIG_SYS_INIT_RAM_LOCK 415 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 416 #ifdef CONFIG_PHYS_64BIT 417 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 418 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 419 /* The assembler doesn't like typecast */ 420 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 421 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 422 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 423 #else 424 /* Initial L1 address */ 425 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 427 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 428 #endif 429 /* Size of used area in RAM */ 430 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 431 432 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 433 GENERATED_GBL_DATA_SIZE) 434 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 435 436 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 437 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 438 439 #define CONFIG_SYS_CPLD_BASE 0xffa00000 440 #ifdef CONFIG_PHYS_64BIT 441 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 442 #else 443 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 444 #endif 445 /* CPLD config size: 1Mb */ 446 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 447 BR_PS_8 | BR_V) 448 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 449 450 #define CONFIG_SYS_PMC_BASE 0xff980000 451 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 452 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 453 BR_PS_8 | BR_V) 454 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 455 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 456 OR_GPCM_EAD) 457 458 #ifdef CONFIG_NAND 459 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 460 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 461 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 462 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 463 #else 464 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 465 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 466 #ifdef CONFIG_NAND_FSL_ELBC 467 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 468 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 469 #endif 470 #endif 471 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 472 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 473 474 /* Vsc7385 switch */ 475 #ifdef CONFIG_VSC7385_ENET 476 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 477 478 #ifdef CONFIG_PHYS_64BIT 479 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 480 #else 481 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 482 #endif 483 484 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 485 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 486 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 487 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 488 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 489 490 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 491 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 492 493 /* The size of the VSC7385 firmware image */ 494 #define CONFIG_VSC7385_IMAGE_SIZE 8192 495 #endif 496 497 /* 498 * Config the L2 Cache as L2 SRAM 499 */ 500 #if defined(CONFIG_SPL_BUILD) 501 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 502 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 503 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 504 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 505 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 506 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 507 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 508 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 509 #if defined(CONFIG_TARGET_P2020RDB) 510 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 511 #else 512 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 513 #endif 514 #elif defined(CONFIG_NAND) 515 #ifdef CONFIG_TPL_BUILD 516 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 517 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 518 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 519 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 520 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 521 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 522 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 523 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 524 #else 525 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 526 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 527 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 528 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 529 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 530 #endif /* CONFIG_TPL_BUILD */ 531 #endif 532 #endif 533 534 /* Serial Port - controlled on board with jumper J8 535 * open - index 2 536 * shorted - index 1 537 */ 538 #undef CONFIG_SERIAL_SOFTWARE_FIFO 539 #define CONFIG_SYS_NS16550_SERIAL 540 #define CONFIG_SYS_NS16550_REG_SIZE 1 541 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 542 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 543 #define CONFIG_NS16550_MIN_FUNCTIONS 544 #endif 545 546 #define CONFIG_SYS_BAUDRATE_TABLE \ 547 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 548 549 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 550 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 551 552 /* I2C */ 553 #define CONFIG_SYS_I2C 554 #define CONFIG_SYS_I2C_FSL 555 #define CONFIG_SYS_FSL_I2C_SPEED 400000 556 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 557 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 558 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 559 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 560 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 561 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 562 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 563 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 564 565 /* 566 * I2C2 EEPROM 567 */ 568 #undef CONFIG_ID_EEPROM 569 570 #define CONFIG_RTC_PT7C4338 571 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 572 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 573 574 /* enable read and write access to EEPROM */ 575 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 576 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 577 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 578 579 #if defined(CONFIG_SPI_FLASH) 580 #define CONFIG_SF_DEFAULT_SPEED 10000000 581 #define CONFIG_SF_DEFAULT_MODE 0 582 #endif 583 584 #if defined(CONFIG_PCI) 585 /* 586 * General PCI 587 * Memory space is mapped 1-1, but I/O space must start from 0. 588 */ 589 590 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 591 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 592 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 593 #ifdef CONFIG_PHYS_64BIT 594 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 595 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 596 #else 597 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 598 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 599 #endif 600 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 601 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 602 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 603 #ifdef CONFIG_PHYS_64BIT 604 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 605 #else 606 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 607 #endif 608 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 609 610 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 611 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 612 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 613 #ifdef CONFIG_PHYS_64BIT 614 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 615 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 616 #else 617 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 618 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 619 #endif 620 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 621 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 622 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 623 #ifdef CONFIG_PHYS_64BIT 624 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 625 #else 626 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 627 #endif 628 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 629 630 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 631 #endif /* CONFIG_PCI */ 632 633 #if defined(CONFIG_TSEC_ENET) 634 #define CONFIG_TSEC1 635 #define CONFIG_TSEC1_NAME "eTSEC1" 636 #define CONFIG_TSEC2 637 #define CONFIG_TSEC2_NAME "eTSEC2" 638 #define CONFIG_TSEC3 639 #define CONFIG_TSEC3_NAME "eTSEC3" 640 641 #define TSEC1_PHY_ADDR 2 642 #define TSEC2_PHY_ADDR 0 643 #define TSEC3_PHY_ADDR 1 644 645 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 646 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 647 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 648 649 #define TSEC1_PHYIDX 0 650 #define TSEC2_PHYIDX 0 651 #define TSEC3_PHYIDX 0 652 653 #define CONFIG_ETHPRIME "eTSEC1" 654 655 #define CONFIG_HAS_ETH0 656 #define CONFIG_HAS_ETH1 657 #define CONFIG_HAS_ETH2 658 #endif /* CONFIG_TSEC_ENET */ 659 660 #ifdef CONFIG_QE 661 /* QE microcode/firmware address */ 662 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 663 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 664 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 665 #endif /* CONFIG_QE */ 666 667 #ifdef CONFIG_TARGET_P1025RDB 668 /* 669 * QE UEC ethernet configuration 670 */ 671 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 672 673 #undef CONFIG_UEC_ETH 674 #define CONFIG_PHY_MODE_NEED_CHANGE 675 676 #define CONFIG_UEC_ETH1 /* ETH1 */ 677 #define CONFIG_HAS_ETH0 678 679 #ifdef CONFIG_UEC_ETH1 680 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 681 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 682 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 683 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 684 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 685 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 686 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 687 #endif /* CONFIG_UEC_ETH1 */ 688 689 #define CONFIG_UEC_ETH5 /* ETH5 */ 690 #define CONFIG_HAS_ETH1 691 692 #ifdef CONFIG_UEC_ETH5 693 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 694 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 695 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 696 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 697 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 698 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 699 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 700 #endif /* CONFIG_UEC_ETH5 */ 701 #endif /* CONFIG_TARGET_P1025RDB */ 702 703 /* 704 * Environment 705 */ 706 #ifdef CONFIG_SPIFLASH 707 #define CONFIG_ENV_SPI_BUS 0 708 #define CONFIG_ENV_SPI_CS 0 709 #define CONFIG_ENV_SPI_MAX_HZ 10000000 710 #define CONFIG_ENV_SPI_MODE 0 711 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 712 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 713 #define CONFIG_ENV_SECT_SIZE 0x10000 714 #elif defined(CONFIG_SDCARD) 715 #define CONFIG_FSL_FIXED_MMC_LOCATION 716 #define CONFIG_ENV_SIZE 0x2000 717 #define CONFIG_SYS_MMC_ENV_DEV 0 718 #elif defined(CONFIG_NAND) 719 #ifdef CONFIG_TPL_BUILD 720 #define CONFIG_ENV_SIZE 0x2000 721 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 722 #else 723 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 724 #endif 725 #define CONFIG_ENV_OFFSET (1024 * 1024) 726 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 727 #elif defined(CONFIG_SYS_RAMBOOT) 728 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 729 #define CONFIG_ENV_SIZE 0x2000 730 #else 731 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 732 #define CONFIG_ENV_SIZE 0x2000 733 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 734 #endif 735 736 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 737 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 738 739 /* 740 * USB 741 */ 742 #define CONFIG_HAS_FSL_DR_USB 743 744 #if defined(CONFIG_HAS_FSL_DR_USB) 745 #ifdef CONFIG_USB_EHCI_HCD 746 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 747 #define CONFIG_USB_EHCI_FSL 748 #endif 749 #endif 750 751 #if defined(CONFIG_TARGET_P1020RDB_PD) 752 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 753 #endif 754 755 #ifdef CONFIG_MMC 756 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 757 #endif 758 759 #undef CONFIG_WATCHDOG /* watchdog disabled */ 760 761 /* 762 * Miscellaneous configurable options 763 */ 764 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 765 766 /* 767 * For booting Linux, the board info and command line data 768 * have to be in the first 64 MB of memory, since this is 769 * the maximum mapped by the Linux kernel during initialization. 770 */ 771 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 772 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 773 774 #if defined(CONFIG_CMD_KGDB) 775 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 776 #endif 777 778 /* 779 * Environment Configuration 780 */ 781 #define CONFIG_HOSTNAME "unknown" 782 #define CONFIG_ROOTPATH "/opt/nfsroot" 783 #define CONFIG_BOOTFILE "uImage" 784 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 785 786 /* default location for tftp and bootm */ 787 #define CONFIG_LOADADDR 1000000 788 789 #ifdef __SW_BOOT_NOR 790 #define __NOR_RST_CMD \ 791 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 792 i2c mw 18 3 __SW_BOOT_MASK 1; reset 793 #endif 794 #ifdef __SW_BOOT_SPI 795 #define __SPI_RST_CMD \ 796 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 797 i2c mw 18 3 __SW_BOOT_MASK 1; reset 798 #endif 799 #ifdef __SW_BOOT_SD 800 #define __SD_RST_CMD \ 801 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 802 i2c mw 18 3 __SW_BOOT_MASK 1; reset 803 #endif 804 #ifdef __SW_BOOT_NAND 805 #define __NAND_RST_CMD \ 806 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 807 i2c mw 18 3 __SW_BOOT_MASK 1; reset 808 #endif 809 #ifdef __SW_BOOT_PCIE 810 #define __PCIE_RST_CMD \ 811 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 812 i2c mw 18 3 __SW_BOOT_MASK 1; reset 813 #endif 814 815 #define CONFIG_EXTRA_ENV_SETTINGS \ 816 "netdev=eth0\0" \ 817 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 818 "loadaddr=1000000\0" \ 819 "bootfile=uImage\0" \ 820 "tftpflash=tftpboot $loadaddr $uboot; " \ 821 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 822 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 823 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 824 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 825 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 826 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 827 "consoledev=ttyS0\0" \ 828 "ramdiskaddr=2000000\0" \ 829 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 830 "fdtaddr=1e00000\0" \ 831 "bdev=sda1\0" \ 832 "jffs2nor=mtdblock3\0" \ 833 "norbootaddr=ef080000\0" \ 834 "norfdtaddr=ef040000\0" \ 835 "jffs2nand=mtdblock9\0" \ 836 "nandbootaddr=100000\0" \ 837 "nandfdtaddr=80000\0" \ 838 "ramdisk_size=120000\0" \ 839 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 840 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 841 __stringify(__NOR_RST_CMD)"\0" \ 842 __stringify(__SPI_RST_CMD)"\0" \ 843 __stringify(__SD_RST_CMD)"\0" \ 844 __stringify(__NAND_RST_CMD)"\0" \ 845 __stringify(__PCIE_RST_CMD)"\0" 846 847 #define CONFIG_NFSBOOTCOMMAND \ 848 "setenv bootargs root=/dev/nfs rw " \ 849 "nfsroot=$serverip:$rootpath " \ 850 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 851 "console=$consoledev,$baudrate $othbootargs;" \ 852 "tftp $loadaddr $bootfile;" \ 853 "tftp $fdtaddr $fdtfile;" \ 854 "bootm $loadaddr - $fdtaddr" 855 856 #define CONFIG_HDBOOT \ 857 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 858 "console=$consoledev,$baudrate $othbootargs;" \ 859 "usb start;" \ 860 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 861 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 862 "bootm $loadaddr - $fdtaddr" 863 864 #define CONFIG_USB_FAT_BOOT \ 865 "setenv bootargs root=/dev/ram rw " \ 866 "console=$consoledev,$baudrate $othbootargs " \ 867 "ramdisk_size=$ramdisk_size;" \ 868 "usb start;" \ 869 "fatload usb 0:2 $loadaddr $bootfile;" \ 870 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 871 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 872 "bootm $loadaddr $ramdiskaddr $fdtaddr" 873 874 #define CONFIG_USB_EXT2_BOOT \ 875 "setenv bootargs root=/dev/ram rw " \ 876 "console=$consoledev,$baudrate $othbootargs " \ 877 "ramdisk_size=$ramdisk_size;" \ 878 "usb start;" \ 879 "ext2load usb 0:4 $loadaddr $bootfile;" \ 880 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 881 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 882 "bootm $loadaddr $ramdiskaddr $fdtaddr" 883 884 #define CONFIG_NORBOOT \ 885 "setenv bootargs root=/dev/$jffs2nor rw " \ 886 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 887 "bootm $norbootaddr - $norfdtaddr" 888 889 #define CONFIG_RAMBOOTCOMMAND \ 890 "setenv bootargs root=/dev/ram rw " \ 891 "console=$consoledev,$baudrate $othbootargs " \ 892 "ramdisk_size=$ramdisk_size;" \ 893 "tftp $ramdiskaddr $ramdiskfile;" \ 894 "tftp $loadaddr $bootfile;" \ 895 "tftp $fdtaddr $fdtfile;" \ 896 "bootm $loadaddr $ramdiskaddr $fdtaddr" 897 898 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 899 900 #endif /* __CONFIG_H */ 901