1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * QorIQ RDB boards configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_36BIT 30 #define CONFIG_PHYS_64BIT 31 #endif 32 33 #if defined(CONFIG_P1020MBG) 34 #define CONFIG_BOARDNAME "P1020MBG" 35 #define CONFIG_P1020 36 #define CONFIG_VSC7385_ENET 37 #define CONFIG_SLIC 38 #define __SW_BOOT_MASK 0x03 39 #define __SW_BOOT_NOR 0xe4 40 #define __SW_BOOT_SD 0x54 41 #endif 42 43 #if defined(CONFIG_P1020UTM) 44 #define CONFIG_BOARDNAME "P1020UTM" 45 #define CONFIG_P1020 46 #define __SW_BOOT_MASK 0x03 47 #define __SW_BOOT_NOR 0xe0 48 #define __SW_BOOT_SD 0x50 49 #endif 50 51 #if defined(CONFIG_P1020RDB) 52 #define CONFIG_BOARDNAME "P1020RDB" 53 #define CONFIG_NAND_FSL_ELBC 54 #define CONFIG_P1020 55 #define CONFIG_SPI_FLASH 56 #define CONFIG_VSC7385_ENET 57 #define CONFIG_SLIC 58 #define __SW_BOOT_MASK 0x03 59 #define __SW_BOOT_NOR 0x5c 60 #define __SW_BOOT_SPI 0x1c 61 #define __SW_BOOT_SD 0x9c 62 #define __SW_BOOT_NAND 0xec 63 #define __SW_BOOT_PCIE 0x6c 64 #endif 65 66 #if defined(CONFIG_P1021RDB) 67 #define CONFIG_BOARDNAME "P1021RDB" 68 #define CONFIG_NAND_FSL_ELBC 69 #define CONFIG_P1021 70 #define CONFIG_QE 71 #define CONFIG_SPI_FLASH 72 #define CONFIG_VSC7385_ENET 73 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 74 addresses in the LBC */ 75 #define __SW_BOOT_MASK 0x03 76 #define __SW_BOOT_NOR 0x5c 77 #define __SW_BOOT_SPI 0x1c 78 #define __SW_BOOT_SD 0x9c 79 #define __SW_BOOT_NAND 0xec 80 #define __SW_BOOT_PCIE 0x6c 81 #endif 82 83 #if defined(CONFIG_P1024RDB) 84 #define CONFIG_BOARDNAME "P1024RDB" 85 #define CONFIG_NAND_FSL_ELBC 86 #define CONFIG_P1024 87 #define CONFIG_SLIC 88 #define CONFIG_SPI_FLASH 89 #define __SW_BOOT_MASK 0xf3 90 #define __SW_BOOT_NOR 0x00 91 #define __SW_BOOT_SPI 0x08 92 #define __SW_BOOT_SD 0x04 93 #define __SW_BOOT_NAND 0x0c 94 #endif 95 96 #if defined(CONFIG_P1025RDB) 97 #define CONFIG_BOARDNAME "P1025RDB" 98 #define CONFIG_NAND_FSL_ELBC 99 #define CONFIG_P1025 100 #define CONFIG_QE 101 #define CONFIG_SLIC 102 #define CONFIG_SPI_FLASH 103 104 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 105 addresses in the LBC */ 106 #define __SW_BOOT_MASK 0xf3 107 #define __SW_BOOT_NOR 0x00 108 #define __SW_BOOT_SPI 0x08 109 #define __SW_BOOT_SD 0x04 110 #define __SW_BOOT_NAND 0x0c 111 #endif 112 113 #if defined(CONFIG_P2020RDB) 114 #define CONFIG_BOARDNAME "P2020RDB" 115 #define CONFIG_NAND_FSL_ELBC 116 #define CONFIG_P2020 117 #define CONFIG_SPI_FLASH 118 #define CONFIG_VSC7385_ENET 119 #define __SW_BOOT_MASK 0x03 120 #define __SW_BOOT_NOR 0xc8 121 #define __SW_BOOT_SPI 0x28 122 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 123 #define __SW_BOOT_NAND 0xe8 124 #define __SW_BOOT_PCIE 0xa8 125 #endif 126 127 #ifdef CONFIG_SDCARD 128 #define CONFIG_RAMBOOT_SDCARD 129 #define CONFIG_SYS_RAMBOOT 130 #define CONFIG_SYS_EXTRA_ENV_RELOC 131 #define CONFIG_SYS_TEXT_BASE 0x11000000 132 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 133 #endif 134 135 #ifdef CONFIG_SPIFLASH 136 #define CONFIG_RAMBOOT_SPIFLASH 137 #define CONFIG_SYS_RAMBOOT 138 #define CONFIG_SYS_EXTRA_ENV_RELOC 139 #define CONFIG_SYS_TEXT_BASE 0x11000000 140 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 141 #endif 142 143 #if defined(CONFIG_NAND) && defined(CONFIG_NAND_FSL_ELBC) 144 #define CONFIG_NAND_U_BOOT 145 #define CONFIG_SYS_EXTRA_ENV_RELOC 146 #define CONFIG_SYS_RAMBOOT 147 #define CONFIG_SYS_TEXT_BASE_SPL 0xff800000 148 #ifdef CONFIG_NAND_SPL 149 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL 150 #else 151 #define CONFIG_SYS_TEXT_BASE 0x11001000 152 #endif /* CONFIG_NAND_SPL */ 153 #endif 154 155 #ifndef CONFIG_SYS_TEXT_BASE 156 #define CONFIG_SYS_TEXT_BASE 0xeff80000 157 #endif 158 159 #ifndef CONFIG_RESET_VECTOR_ADDRESS 160 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 161 #endif 162 163 #ifndef CONFIG_SYS_MONITOR_BASE 164 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 165 #endif 166 167 /* High Level Configuration Options */ 168 #define CONFIG_BOOKE 169 #define CONFIG_E500 170 #define CONFIG_MPC85xx 171 172 #define CONFIG_MP 173 174 #define CONFIG_FSL_ELBC 175 #define CONFIG_PCI 176 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 177 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 178 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 179 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 180 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 181 182 #define CONFIG_FSL_LAW 183 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 184 #define CONFIG_ENV_OVERWRITE 185 186 #define CONFIG_CMD_SATA 187 #define CONFIG_SATA_SIL3114 188 #define CONFIG_SYS_SATA_MAX_DEVICE 2 189 #define CONFIG_LIBATA 190 #define CONFIG_LBA48 191 192 #if defined(CONFIG_P2020RDB) 193 #define CONFIG_SYS_CLK_FREQ 100000000 194 #else 195 #define CONFIG_SYS_CLK_FREQ 66666666 196 #endif 197 #define CONFIG_DDR_CLK_FREQ 66666666 198 199 #define CONFIG_HWCONFIG 200 /* 201 * These can be toggled for performance analysis, otherwise use default. 202 */ 203 #define CONFIG_L2_CACHE 204 #define CONFIG_BTB 205 206 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 207 208 #define CONFIG_ENABLE_36BIT_PHYS 209 210 #ifdef CONFIG_PHYS_64BIT 211 #define CONFIG_ADDR_MAP 1 212 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 213 #endif 214 215 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 216 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 217 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 218 219 #define CONFIG_SYS_CCSRBAR 0xffe00000 220 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 221 222 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 223 SPL code*/ 224 #if defined(CONFIG_NAND_U_BOOT) && defined(CONFIG_NAND_SPL) 225 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 226 #endif 227 228 /* DDR Setup */ 229 #define CONFIG_FSL_DDR3 230 #define CONFIG_DDR_RAW_TIMING 231 #define CONFIG_DDR_SPD 232 #define CONFIG_SYS_SPD_BUS_NUM 1 233 #define SPD_EEPROM_ADDRESS 0x52 234 #undef CONFIG_FSL_DDR_INTERACTIVE 235 236 #ifdef CONFIG_P1020MBG 237 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 238 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 239 #else 240 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 241 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 242 #endif 243 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 244 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 245 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 246 247 #define CONFIG_NUM_DDR_CONTROLLERS 1 248 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 249 250 /* Default settings for DDR3 */ 251 #ifdef CONFIG_P2020RDB 252 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 253 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 254 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 255 #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 256 #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 257 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 258 259 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 260 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 261 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 262 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 263 264 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 265 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8645F607 266 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 267 #define CONFIG_SYS_DDR_RCW_1 0x00000000 268 #define CONFIG_SYS_DDR_RCW_2 0x00000000 269 #define CONFIG_SYS_DDR_CONTROL 0xC7000000 /* Type = DDR3 */ 270 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 271 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 272 #define CONFIG_SYS_DDR_TIMING_5 0x02401400 273 274 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 275 #define CONFIG_SYS_DDR_TIMING_0 0x00330104 276 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4644 277 #define CONFIG_SYS_DDR_TIMING_2 0x0FA88CCF 278 #define CONFIG_SYS_DDR_CLK_CTRL 0x02000000 279 #define CONFIG_SYS_DDR_MODE_1 0x00421422 280 #define CONFIG_SYS_DDR_MODE_2 0x04000000 281 #define CONFIG_SYS_DDR_INTERVAL 0x0C300100 282 283 #else 284 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 285 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 286 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 287 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 288 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 289 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 290 291 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 292 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 293 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 294 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 295 296 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 297 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 298 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 299 #define CONFIG_SYS_DDR_RCW_1 0x00000000 300 #define CONFIG_SYS_DDR_RCW_2 0x00000000 301 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 302 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 303 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 304 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 305 306 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 307 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 308 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 309 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 310 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 311 #define CONFIG_SYS_DDR_MODE_1 0x40461520 312 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 313 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 314 #endif 315 316 #undef CONFIG_CLOCKS_IN_MHZ 317 318 /* 319 * Memory map 320 * 321 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 322 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 323 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 324 * 325 * Localbus cacheable (TBD) 326 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 327 * 328 * Localbus non-cacheable 329 * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable 330 * 0xff80_0000 0xff8f_ffff NAND flash 1M non-cacheable 331 * 0xff90_0000 0xff97_ffff L2 SDRAM(REV.) 512K cacheable(optional) 332 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable 333 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable 334 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 335 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 336 */ 337 338 339 /* 340 * Local Bus Definitions 341 */ 342 #if defined(CONFIG_P1020MBG) 343 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 344 #define CONFIG_SYS_FLASH_BASE 0xec000000 345 #elif defined(CONFIG_P1020UTM) 346 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 347 #define CONFIG_SYS_FLASH_BASE 0xee000000 348 #else 349 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 350 #define CONFIG_SYS_FLASH_BASE 0xef000000 351 #endif 352 353 354 #ifdef CONFIG_PHYS_64BIT 355 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 356 #else 357 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 358 #endif 359 360 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ 361 | BR_PS_16 | BR_V) 362 363 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 364 365 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 366 #define CONFIG_SYS_FLASH_QUIET_TEST 367 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 368 369 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 370 371 #undef CONFIG_SYS_FLASH_CHECKSUM 372 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 373 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 374 375 #define CONFIG_FLASH_CFI_DRIVER 376 #define CONFIG_SYS_FLASH_CFI 377 #define CONFIG_SYS_FLASH_EMPTY_INFO 378 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 379 380 /* Nand Flash */ 381 #ifdef CONFIG_NAND_FSL_ELBC 382 #define CONFIG_SYS_NAND_BASE 0xff800000 383 #ifdef CONFIG_PHYS_64BIT 384 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 385 #else 386 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 387 #endif 388 389 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 390 #define CONFIG_SYS_MAX_NAND_DEVICE 1 391 #define CONFIG_MTD_NAND_VERIFY_WRITE 392 #define CONFIG_CMD_NAND 393 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 394 395 /* NAND boot: 4K NAND loader config */ 396 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 397 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE) 398 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) 399 #define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 400 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 401 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 402 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) 403 404 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS)) \ 405 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 406 | BR_PS_8 /* Port Size = 8 bit */ \ 407 | BR_MS_FCM /* MSEL = FCM */ \ 408 | BR_V) /* valid */ 409 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 410 | OR_FCM_CSCT \ 411 | OR_FCM_CST \ 412 | OR_FCM_CHT \ 413 | OR_FCM_SCY_1 \ 414 | OR_FCM_TRLX \ 415 | OR_FCM_EHTR) 416 #endif /* CONFIG_NAND_FSL_ELBC */ 417 418 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 419 420 #define CONFIG_SYS_INIT_RAM_LOCK 421 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 422 #ifdef CONFIG_PHYS_64BIT 423 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 424 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 425 /* The assembler doesn't like typecast */ 426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 427 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 428 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 429 #else 430 /* Initial L1 address */ 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 432 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 434 #endif 435 /* Size of used area in RAM */ 436 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 437 438 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 439 GENERATED_GBL_DATA_SIZE) 440 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 441 442 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ 443 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 444 445 #define CONFIG_SYS_CPLD_BASE 0xffa00000 446 #ifdef CONFIG_PHYS_64BIT 447 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 448 #else 449 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 450 #endif 451 /* CPLD config size: 1Mb */ 452 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 453 BR_PS_8 | BR_V) 454 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 455 456 #define CONFIG_SYS_PMC_BASE 0xff980000 457 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 458 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 459 BR_PS_8 | BR_V) 460 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 461 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 462 OR_GPCM_EAD) 463 464 #ifdef CONFIG_NAND_U_BOOT 465 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 466 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 467 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 468 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 469 #else 470 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 471 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 472 #ifdef CONFIG_NAND_FSL_ELBC 473 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 474 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 475 #endif 476 #endif 477 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 478 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 479 480 481 /* Vsc7385 switch */ 482 #ifdef CONFIG_VSC7385_ENET 483 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 484 485 #ifdef CONFIG_PHYS_64BIT 486 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 487 #else 488 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 489 #endif 490 491 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 492 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 493 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 494 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 495 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 496 497 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 498 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 499 500 /* The size of the VSC7385 firmware image */ 501 #define CONFIG_VSC7385_IMAGE_SIZE 8192 502 #endif 503 504 /* Serial Port - controlled on board with jumper J8 505 * open - index 2 506 * shorted - index 1 507 */ 508 #define CONFIG_CONS_INDEX 1 509 #undef CONFIG_SERIAL_SOFTWARE_FIFO 510 #define CONFIG_SYS_NS16550 511 #define CONFIG_SYS_NS16550_SERIAL 512 #define CONFIG_SYS_NS16550_REG_SIZE 1 513 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 514 #ifdef CONFIG_NAND_SPL 515 #define CONFIG_NS16550_MIN_FUNCTIONS 516 #endif 517 518 #define CONFIG_SYS_BAUDRATE_TABLE \ 519 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 520 521 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 522 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 523 524 /* Use the HUSH parser */ 525 #define CONFIG_SYS_HUSH_PARSER 526 #ifdef CONFIG_SYS_HUSH_PARSER 527 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 528 #endif 529 530 /* 531 * Pass open firmware flat tree 532 */ 533 #define CONFIG_OF_LIBFDT 534 #define CONFIG_OF_BOARD_SETUP 535 #define CONFIG_OF_STDOUT_VIA_ALIAS 536 537 #define CONFIG_SYS_64BIT_VSPRINTF 538 #define CONFIG_SYS_64BIT_STRTOUL 539 540 /* new uImage format support */ 541 #define CONFIG_FIT 542 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 543 544 /* I2C */ 545 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 546 #define CONFIG_HARD_I2C /* I2C with hardware support */ 547 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 548 #define CONFIG_I2C_MULTI_BUS 549 #define CONFIG_I2C_CMD_TREE 550 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C spd and slave address */ 551 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 552 #define CONFIG_SYS_I2C_SLAVE 0x7F 553 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe this addr */ 554 #define CONFIG_SYS_I2C_OFFSET 0x3000 555 #define CONFIG_SYS_I2C2_OFFSET 0x3100 556 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 557 558 /* 559 * I2C2 EEPROM 560 */ 561 #undef CONFIG_ID_EEPROM 562 563 #define CONFIG_RTC_PT7C4338 564 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 565 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 566 567 /* enable read and write access to EEPROM */ 568 #define CONFIG_CMD_EEPROM 569 #define CONFIG_SYS_I2C_MULTI_EEPROMS 570 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 571 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 572 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 573 574 /* 575 * eSPI - Enhanced SPI 576 */ 577 #define CONFIG_HARD_SPI 578 #define CONFIG_FSL_ESPI 579 580 #if defined(CONFIG_SPI_FLASH) 581 #define CONFIG_SPI_FLASH_SPANSION 582 #define CONFIG_CMD_SF 583 #define CONFIG_SF_DEFAULT_SPEED 10000000 584 #define CONFIG_SF_DEFAULT_MODE 0 585 #endif 586 587 #if defined(CONFIG_PCI) 588 /* 589 * General PCI 590 * Memory space is mapped 1-1, but I/O space must start from 0. 591 */ 592 593 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 594 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 595 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 596 #ifdef CONFIG_PHYS_64BIT 597 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 598 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 599 #else 600 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 601 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 602 #endif 603 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 604 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 605 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 606 #ifdef CONFIG_PHYS_64BIT 607 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 608 #else 609 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 610 #endif 611 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 612 613 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 614 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 615 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 616 #ifdef CONFIG_PHYS_64BIT 617 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 618 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 619 #else 620 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 621 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 622 #endif 623 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 624 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 625 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 626 #ifdef CONFIG_PHYS_64BIT 627 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 628 #else 629 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 630 #endif 631 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 632 633 #define CONFIG_NET_MULTI 634 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 635 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ 636 #define CONFIG_CMD_PCI 637 #define CONFIG_CMD_NET 638 639 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 640 #define CONFIG_DOS_PARTITION 641 #endif /* CONFIG_PCI */ 642 643 #if defined(CONFIG_TSEC_ENET) 644 645 #ifndef CONFIG_NET_MULTI 646 #define CONFIG_NET_MULTI 647 #endif 648 649 #define CONFIG_MII /* MII PHY management */ 650 #define CONFIG_TSEC1 651 #define CONFIG_TSEC1_NAME "eTSEC1" 652 #define CONFIG_TSEC2 653 #define CONFIG_TSEC2_NAME "eTSEC2" 654 #define CONFIG_TSEC3 655 #define CONFIG_TSEC3_NAME "eTSEC3" 656 657 #define TSEC1_PHY_ADDR 2 658 #define TSEC2_PHY_ADDR 0 659 #define TSEC3_PHY_ADDR 1 660 661 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 662 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 663 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 664 665 #define TSEC1_PHYIDX 0 666 #define TSEC2_PHYIDX 0 667 #define TSEC3_PHYIDX 0 668 669 #define CONFIG_ETHPRIME "eTSEC1" 670 671 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 672 673 #define CONFIG_HAS_ETH0 674 #define CONFIG_HAS_ETH1 675 #define CONFIG_HAS_ETH2 676 #endif /* CONFIG_TSEC_ENET */ 677 678 #ifdef CONFIG_QE 679 /* QE microcode/firmware address */ 680 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 681 #define CONFIG_SYS_QE_FW_LENGTH 0x10000 682 #endif /* CONFIG_QE */ 683 684 #ifdef CONFIG_P1025RDB 685 /* 686 * QE UEC ethernet configuration 687 */ 688 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 689 690 #undef CONFIG_UEC_ETH 691 #define CONFIG_PHY_MODE_NEED_CHANGE 692 693 #define CONFIG_UEC_ETH1 /* ETH1 */ 694 #define CONFIG_HAS_ETH0 695 696 #ifdef CONFIG_UEC_ETH1 697 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 698 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 699 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 700 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 701 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 702 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 703 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 704 #endif /* CONFIG_UEC_ETH1 */ 705 706 #define CONFIG_UEC_ETH5 /* ETH5 */ 707 #define CONFIG_HAS_ETH1 708 709 #ifdef CONFIG_UEC_ETH5 710 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 711 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 712 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 713 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 714 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 715 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 716 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 717 #endif /* CONFIG_UEC_ETH5 */ 718 #endif /* CONFIG_P1025RDB */ 719 720 /* 721 * Environment 722 */ 723 #ifdef CONFIG_SYS_RAMBOOT 724 #ifdef CONFIG_RAMBOOT_SPIFLASH 725 #define CONFIG_ENV_IS_IN_SPI_FLASH 726 #define CONFIG_ENV_SPI_BUS 0 727 #define CONFIG_ENV_SPI_CS 0 728 #define CONFIG_ENV_SPI_MAX_HZ 10000000 729 #define CONFIG_ENV_SPI_MODE 0 730 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 731 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 732 #define CONFIG_ENV_SECT_SIZE 0x10000 733 #elif defined(CONFIG_RAMBOOT_SDCARD) 734 #define CONFIG_ENV_IS_IN_MMC 735 #define CONFIG_ENV_SIZE 0x2000 736 #define CONFIG_SYS_MMC_ENV_DEV 0 737 #elif defined(CONFIG_NAND_U_BOOT) 738 #define CONFIG_ENV_IS_IN_NAND 739 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 740 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 741 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 742 #else 743 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 744 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 745 #define CONFIG_ENV_SIZE 0x2000 746 #endif 747 #else 748 #define CONFIG_ENV_IS_IN_FLASH 749 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 750 #define CONFIG_ENV_ADDR 0xfff80000 751 #else 752 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 753 #endif 754 #define CONFIG_ENV_SIZE 0x2000 755 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 756 #endif 757 758 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 759 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 760 761 /* 762 * Command line configuration. 763 */ 764 #include <config_cmd_default.h> 765 766 #define CONFIG_CMD_IRQ 767 #define CONFIG_CMD_PING 768 #define CONFIG_CMD_I2C 769 #define CONFIG_CMD_MII 770 #define CONFIG_CMD_DATE 771 #define CONFIG_CMD_ELF 772 #define CONFIG_CMD_SETEXPR 773 #define CONFIG_CMD_REGINFO 774 775 /* 776 * USB 777 */ 778 #define CONFIG_HAS_FSL_DR_USB 779 780 #if defined(CONFIG_HAS_FSL_DR_USB) 781 #define CONFIG_USB_EHCI 782 783 #ifdef CONFIG_USB_EHCI 784 #define CONFIG_CMD_USB 785 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 786 #define CONFIG_USB_EHCI_FSL 787 #define CONFIG_USB_STORAGE 788 #endif 789 #endif 790 791 #define CONFIG_MMC 792 793 #ifdef CONFIG_MMC 794 #define CONFIG_FSL_ESDHC 795 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 796 #define CONFIG_CMD_MMC 797 #define CONFIG_GENERIC_MMC 798 #endif 799 800 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 801 || defined(CONFIG_FSL_SATA) 802 #define CONFIG_CMD_EXT2 803 #define CONFIG_CMD_FAT 804 #define CONFIG_DOS_PARTITION 805 #endif 806 807 #undef CONFIG_WATCHDOG /* watchdog disabled */ 808 809 /* 810 * Miscellaneous configurable options 811 */ 812 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 813 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 814 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 815 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 816 #if defined(CONFIG_CMD_KGDB) 817 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 818 #else 819 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 820 #endif 821 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 822 /* Print Buffer Size */ 823 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 824 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 825 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ 826 827 /* 828 * For booting Linux, the board info and command line data 829 * have to be in the first 64 MB of memory, since this is 830 * the maximum mapped by the Linux kernel during initialization. 831 */ 832 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 833 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 834 835 #if defined(CONFIG_CMD_KGDB) 836 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 837 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 838 #endif 839 840 /* 841 * Environment Configuration 842 */ 843 #define CONFIG_HOSTNAME unknown 844 #define CONFIG_ROOTPATH "/opt/nfsroot" 845 #define CONFIG_BOOTFILE "uImage" 846 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 847 848 /* default location for tftp and bootm */ 849 #define CONFIG_LOADADDR 1000000 850 851 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 852 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 853 854 #define CONFIG_BAUDRATE 115200 855 856 #ifdef __SW_BOOT_NOR 857 #define __NOR_RST_CMD \ 858 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 859 i2c mw 18 3 __SW_BOOT_MASK 1; reset 860 #endif 861 #ifdef __SW_BOOT_SPI 862 #define __SPI_RST_CMD \ 863 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 864 i2c mw 18 3 __SW_BOOT_MASK 1; reset 865 #endif 866 #ifdef __SW_BOOT_SD 867 #define __SD_RST_CMD \ 868 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 869 i2c mw 18 3 __SW_BOOT_MASK 1; reset 870 #endif 871 #ifdef __SW_BOOT_NAND 872 #define __NAND_RST_CMD \ 873 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 874 i2c mw 18 3 __SW_BOOT_MASK 1; reset 875 #endif 876 #ifdef __SW_BOOT_PCIE 877 #define __PCIE_RST_CMD \ 878 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 879 i2c mw 18 3 __SW_BOOT_MASK 1; reset 880 #endif 881 882 #define CONFIG_EXTRA_ENV_SETTINGS \ 883 "netdev=eth0\0" \ 884 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 885 "loadaddr=1000000\0" \ 886 "bootfile=uImage\0" \ 887 "tftpflash=tftpboot $loadaddr $uboot; " \ 888 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 889 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 890 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 891 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 892 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 893 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 894 "consoledev=ttyS0\0" \ 895 "ramdiskaddr=2000000\0" \ 896 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 897 "fdtaddr=c00000\0" \ 898 "bdev=sda1\0" \ 899 "jffs2nor=mtdblock3\0" \ 900 "norbootaddr=ef080000\0" \ 901 "norfdtaddr=ef040000\0" \ 902 "jffs2nand=mtdblock9\0" \ 903 "nandbootaddr=100000\0" \ 904 "nandfdtaddr=80000\0" \ 905 "ramdisk_size=120000\0" \ 906 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 907 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 908 MK_STR(__NOR_RST_CMD)"\0" \ 909 MK_STR(__SPI_RST_CMD)"\0" \ 910 MK_STR(__SD_RST_CMD)"\0" \ 911 MK_STR(__NAND_RST_CMD)"\0" \ 912 MK_STR(__PCIE_RST_CMD)"\0" 913 914 #define CONFIG_NFSBOOTCOMMAND \ 915 "setenv bootargs root=/dev/nfs rw " \ 916 "nfsroot=$serverip:$rootpath " \ 917 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 918 "console=$consoledev,$baudrate $othbootargs;" \ 919 "tftp $loadaddr $bootfile;" \ 920 "tftp $fdtaddr $fdtfile;" \ 921 "bootm $loadaddr - $fdtaddr" 922 923 #define CONFIG_HDBOOT \ 924 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 925 "console=$consoledev,$baudrate $othbootargs;" \ 926 "usb start;" \ 927 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 928 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 929 "bootm $loadaddr - $fdtaddr" 930 931 #define CONFIG_USB_FAT_BOOT \ 932 "setenv bootargs root=/dev/ram rw " \ 933 "console=$consoledev,$baudrate $othbootargs " \ 934 "ramdisk_size=$ramdisk_size;" \ 935 "usb start;" \ 936 "fatload usb 0:2 $loadaddr $bootfile;" \ 937 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 938 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 939 "bootm $loadaddr $ramdiskaddr $fdtaddr" 940 941 #define CONFIG_USB_EXT2_BOOT \ 942 "setenv bootargs root=/dev/ram rw " \ 943 "console=$consoledev,$baudrate $othbootargs " \ 944 "ramdisk_size=$ramdisk_size;" \ 945 "usb start;" \ 946 "ext2load usb 0:4 $loadaddr $bootfile;" \ 947 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 948 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 949 "bootm $loadaddr $ramdiskaddr $fdtaddr" 950 951 #define CONFIG_NORBOOT \ 952 "setenv bootargs root=/dev/$jffs2nor rw " \ 953 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 954 "bootm $norbootaddr - $norfdtaddr" 955 956 #define CONFIG_RAMBOOTCOMMAND \ 957 "setenv bootargs root=/dev/ram rw " \ 958 "console=$consoledev,$baudrate $othbootargs " \ 959 "ramdisk_size=$ramdisk_size;" \ 960 "tftp $ramdiskaddr $ramdiskfile;" \ 961 "tftp $loadaddr $bootfile;" \ 962 "tftp $fdtaddr $fdtfile;" \ 963 "bootm $loadaddr $ramdiskaddr $fdtaddr" 964 965 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 966 967 #endif /* __CONFIG_H */ 968