1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * QorIQ RDB boards configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_DISPLAY_BOARDINFO 14 15 #ifdef CONFIG_36BIT 16 #define CONFIG_PHYS_64BIT 17 #endif 18 19 #if defined(CONFIG_P1020MBG) 20 #define CONFIG_BOARDNAME "P1020MBG-PC" 21 #define CONFIG_P1020 22 #define CONFIG_VSC7385_ENET 23 #define CONFIG_SLIC 24 #define __SW_BOOT_MASK 0x03 25 #define __SW_BOOT_NOR 0xe4 26 #define __SW_BOOT_SD 0x54 27 #define CONFIG_SYS_L2_SIZE (256 << 10) 28 #endif 29 30 #if defined(CONFIG_P1020UTM) 31 #define CONFIG_BOARDNAME "P1020UTM-PC" 32 #define CONFIG_P1020 33 #define __SW_BOOT_MASK 0x03 34 #define __SW_BOOT_NOR 0xe0 35 #define __SW_BOOT_SD 0x50 36 #define CONFIG_SYS_L2_SIZE (256 << 10) 37 #endif 38 39 #if defined(CONFIG_P1020RDB_PC) 40 #define CONFIG_BOARDNAME "P1020RDB-PC" 41 #define CONFIG_NAND_FSL_ELBC 42 #define CONFIG_P1020 43 #define CONFIG_VSC7385_ENET 44 #define CONFIG_SLIC 45 #define __SW_BOOT_MASK 0x03 46 #define __SW_BOOT_NOR 0x5c 47 #define __SW_BOOT_SPI 0x1c 48 #define __SW_BOOT_SD 0x9c 49 #define __SW_BOOT_NAND 0xec 50 #define __SW_BOOT_PCIE 0x6c 51 #define CONFIG_SYS_L2_SIZE (256 << 10) 52 #endif 53 54 /* 55 * P1020RDB-PD board has user selectable switches for evaluating different 56 * frequency and boot options for the P1020 device. The table that 57 * follow describe the available options. The front six binary number was in 58 * accordance with SW3[1:6]. 59 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 60 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 61 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 62 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 63 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 64 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 65 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 66 */ 67 #if defined(CONFIG_P1020RDB_PD) 68 #define CONFIG_BOARDNAME "P1020RDB-PD" 69 #define CONFIG_NAND_FSL_ELBC 70 #define CONFIG_P1020 71 #define CONFIG_VSC7385_ENET 72 #define CONFIG_SLIC 73 #define __SW_BOOT_MASK 0x03 74 #define __SW_BOOT_NOR 0x64 75 #define __SW_BOOT_SPI 0x34 76 #define __SW_BOOT_SD 0x24 77 #define __SW_BOOT_NAND 0x44 78 #define __SW_BOOT_PCIE 0x74 79 #define CONFIG_SYS_L2_SIZE (256 << 10) 80 /* 81 * Dynamic MTD Partition support with mtdparts 82 */ 83 #define CONFIG_MTD_DEVICE 84 #define CONFIG_MTD_PARTITIONS 85 #define CONFIG_CMD_MTDPARTS 86 #define CONFIG_FLASH_CFI_MTD 87 #define MTDIDS_DEFAULT "nor0=ec000000.nor" 88 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ 89 "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" 90 #endif 91 92 #if defined(CONFIG_P1021RDB) 93 #define CONFIG_BOARDNAME "P1021RDB-PC" 94 #define CONFIG_NAND_FSL_ELBC 95 #define CONFIG_P1021 96 #define CONFIG_QE 97 #define CONFIG_VSC7385_ENET 98 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 99 addresses in the LBC */ 100 #define __SW_BOOT_MASK 0x03 101 #define __SW_BOOT_NOR 0x5c 102 #define __SW_BOOT_SPI 0x1c 103 #define __SW_BOOT_SD 0x9c 104 #define __SW_BOOT_NAND 0xec 105 #define __SW_BOOT_PCIE 0x6c 106 #define CONFIG_SYS_L2_SIZE (256 << 10) 107 /* 108 * Dynamic MTD Partition support with mtdparts 109 */ 110 #define CONFIG_MTD_DEVICE 111 #define CONFIG_MTD_PARTITIONS 112 #define CONFIG_CMD_MTDPARTS 113 #define CONFIG_FLASH_CFI_MTD 114 #ifdef CONFIG_PHYS_64BIT 115 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 116 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 117 "256k(dtb),4608k(kernel),9728k(fs)," \ 118 "256k(qe-ucode-firmware),1280k(u-boot)" 119 #else 120 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 121 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 122 "256k(dtb),4608k(kernel),9728k(fs)," \ 123 "256k(qe-ucode-firmware),1280k(u-boot)" 124 #endif 125 #endif 126 127 #if defined(CONFIG_P1024RDB) 128 #define CONFIG_BOARDNAME "P1024RDB" 129 #define CONFIG_NAND_FSL_ELBC 130 #define CONFIG_P1024 131 #define CONFIG_SLIC 132 #define __SW_BOOT_MASK 0xf3 133 #define __SW_BOOT_NOR 0x00 134 #define __SW_BOOT_SPI 0x08 135 #define __SW_BOOT_SD 0x04 136 #define __SW_BOOT_NAND 0x0c 137 #define CONFIG_SYS_L2_SIZE (256 << 10) 138 #endif 139 140 #if defined(CONFIG_P1025RDB) 141 #define CONFIG_BOARDNAME "P1025RDB" 142 #define CONFIG_NAND_FSL_ELBC 143 #define CONFIG_P1025 144 #define CONFIG_QE 145 #define CONFIG_SLIC 146 147 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 148 addresses in the LBC */ 149 #define __SW_BOOT_MASK 0xf3 150 #define __SW_BOOT_NOR 0x00 151 #define __SW_BOOT_SPI 0x08 152 #define __SW_BOOT_SD 0x04 153 #define __SW_BOOT_NAND 0x0c 154 #define CONFIG_SYS_L2_SIZE (256 << 10) 155 #endif 156 157 #if defined(CONFIG_P2020RDB) 158 #define CONFIG_BOARDNAME "P2020RDB-PCA" 159 #define CONFIG_NAND_FSL_ELBC 160 #define CONFIG_P2020 161 #define CONFIG_VSC7385_ENET 162 #define __SW_BOOT_MASK 0x03 163 #define __SW_BOOT_NOR 0xc8 164 #define __SW_BOOT_SPI 0x28 165 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 166 #define __SW_BOOT_NAND 0xe8 167 #define __SW_BOOT_PCIE 0xa8 168 #define CONFIG_SYS_L2_SIZE (512 << 10) 169 /* 170 * Dynamic MTD Partition support with mtdparts 171 */ 172 #define CONFIG_MTD_DEVICE 173 #define CONFIG_MTD_PARTITIONS 174 #define CONFIG_CMD_MTDPARTS 175 #define CONFIG_FLASH_CFI_MTD 176 #ifdef CONFIG_PHYS_64BIT 177 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 178 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 179 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 180 #else 181 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 182 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 183 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 184 #endif 185 #endif 186 187 #ifdef CONFIG_SDCARD 188 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 189 #define CONFIG_SPL_ENV_SUPPORT 190 #define CONFIG_SPL_SERIAL_SUPPORT 191 #define CONFIG_SPL_MMC_SUPPORT 192 #define CONFIG_SPL_MMC_MINIMAL 193 #define CONFIG_SPL_FLUSH_IMAGE 194 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 195 #define CONFIG_SPL_LIBGENERIC_SUPPORT 196 #define CONFIG_SPL_LIBCOMMON_SUPPORT 197 #define CONFIG_SPL_I2C_SUPPORT 198 #define CONFIG_FSL_LAW /* Use common FSL init code */ 199 #define CONFIG_SYS_TEXT_BASE 0x11001000 200 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 201 #define CONFIG_SPL_PAD_TO 0x20000 202 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 203 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 204 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 205 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 206 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 207 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 208 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 209 #define CONFIG_SPL_MMC_BOOT 210 #ifdef CONFIG_SPL_BUILD 211 #define CONFIG_SPL_COMMON_INIT_DDR 212 #endif 213 #endif 214 215 #ifdef CONFIG_SPIFLASH 216 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 217 #define CONFIG_SPL_ENV_SUPPORT 218 #define CONFIG_SPL_SERIAL_SUPPORT 219 #define CONFIG_SPL_SPI_SUPPORT 220 #define CONFIG_SPL_SPI_FLASH_SUPPORT 221 #define CONFIG_SPL_SPI_FLASH_MINIMAL 222 #define CONFIG_SPL_FLUSH_IMAGE 223 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 224 #define CONFIG_SPL_LIBGENERIC_SUPPORT 225 #define CONFIG_SPL_LIBCOMMON_SUPPORT 226 #define CONFIG_SPL_I2C_SUPPORT 227 #define CONFIG_FSL_LAW /* Use common FSL init code */ 228 #define CONFIG_SYS_TEXT_BASE 0x11001000 229 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 230 #define CONFIG_SPL_PAD_TO 0x20000 231 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 232 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 233 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 234 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 235 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 236 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 237 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 238 #define CONFIG_SPL_SPI_BOOT 239 #ifdef CONFIG_SPL_BUILD 240 #define CONFIG_SPL_COMMON_INIT_DDR 241 #endif 242 #endif 243 244 #ifdef CONFIG_NAND 245 #ifdef CONFIG_TPL_BUILD 246 #define CONFIG_SPL_NAND_BOOT 247 #define CONFIG_SPL_FLUSH_IMAGE 248 #define CONFIG_SPL_ENV_SUPPORT 249 #define CONFIG_SPL_NAND_INIT 250 #define CONFIG_SPL_SERIAL_SUPPORT 251 #define CONFIG_SPL_LIBGENERIC_SUPPORT 252 #define CONFIG_SPL_LIBCOMMON_SUPPORT 253 #define CONFIG_SPL_I2C_SUPPORT 254 #define CONFIG_SPL_NAND_SUPPORT 255 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 256 #define CONFIG_SPL_COMMON_INIT_DDR 257 #define CONFIG_SPL_MAX_SIZE (128 << 10) 258 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 259 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 260 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 261 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 262 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 263 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 264 #elif defined(CONFIG_SPL_BUILD) 265 #define CONFIG_SPL_INIT_MINIMAL 266 #define CONFIG_SPL_SERIAL_SUPPORT 267 #define CONFIG_SPL_NAND_SUPPORT 268 #define CONFIG_SPL_FLUSH_IMAGE 269 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 270 #define CONFIG_SPL_TEXT_BASE 0xff800000 271 #define CONFIG_SPL_MAX_SIZE 4096 272 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 273 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 274 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 275 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 276 #endif /* not CONFIG_TPL_BUILD */ 277 278 #define CONFIG_SPL_PAD_TO 0x20000 279 #define CONFIG_TPL_PAD_TO 0x20000 280 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 281 #define CONFIG_SYS_TEXT_BASE 0x11001000 282 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 283 #endif 284 285 #ifndef CONFIG_SYS_TEXT_BASE 286 #define CONFIG_SYS_TEXT_BASE 0xeff40000 287 #endif 288 289 #ifndef CONFIG_RESET_VECTOR_ADDRESS 290 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 291 #endif 292 293 #ifndef CONFIG_SYS_MONITOR_BASE 294 #ifdef CONFIG_SPL_BUILD 295 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 296 #else 297 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 298 #endif 299 #endif 300 301 /* High Level Configuration Options */ 302 #define CONFIG_BOOKE 303 #define CONFIG_E500 304 305 #define CONFIG_MP 306 307 #define CONFIG_FSL_ELBC 308 #define CONFIG_PCI 309 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 310 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 311 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 312 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 313 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 314 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 315 316 #define CONFIG_FSL_LAW 317 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 318 #define CONFIG_ENV_OVERWRITE 319 320 #define CONFIG_CMD_SATA 321 #define CONFIG_SATA_SIL 322 #define CONFIG_SYS_SATA_MAX_DEVICE 2 323 #define CONFIG_LIBATA 324 #define CONFIG_LBA48 325 326 #if defined(CONFIG_P2020RDB) 327 #define CONFIG_SYS_CLK_FREQ 100000000 328 #else 329 #define CONFIG_SYS_CLK_FREQ 66666666 330 #endif 331 #define CONFIG_DDR_CLK_FREQ 66666666 332 333 #define CONFIG_HWCONFIG 334 /* 335 * These can be toggled for performance analysis, otherwise use default. 336 */ 337 #define CONFIG_L2_CACHE 338 #define CONFIG_BTB 339 340 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 341 342 #define CONFIG_ENABLE_36BIT_PHYS 343 344 #ifdef CONFIG_PHYS_64BIT 345 #define CONFIG_ADDR_MAP 1 346 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 347 #endif 348 349 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 350 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 351 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 352 353 #define CONFIG_SYS_CCSRBAR 0xffe00000 354 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 355 356 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 357 SPL code*/ 358 #ifdef CONFIG_SPL_BUILD 359 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 360 #endif 361 362 /* DDR Setup */ 363 #define CONFIG_SYS_FSL_DDR3 364 #define CONFIG_SYS_DDR_RAW_TIMING 365 #define CONFIG_DDR_SPD 366 #define CONFIG_SYS_SPD_BUS_NUM 1 367 #define SPD_EEPROM_ADDRESS 0x52 368 #undef CONFIG_FSL_DDR_INTERACTIVE 369 370 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 371 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 372 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 373 #else 374 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 375 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 376 #endif 377 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 378 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 379 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 380 381 #define CONFIG_NUM_DDR_CONTROLLERS 1 382 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 383 384 /* Default settings for DDR3 */ 385 #ifndef CONFIG_P2020RDB 386 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 387 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 388 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 389 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 390 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 391 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 392 393 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 394 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 395 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 396 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 397 398 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 399 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 400 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 401 #define CONFIG_SYS_DDR_RCW_1 0x00000000 402 #define CONFIG_SYS_DDR_RCW_2 0x00000000 403 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 404 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 405 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 406 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 407 408 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 409 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 410 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 411 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 412 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 413 #define CONFIG_SYS_DDR_MODE_1 0x40461520 414 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 415 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 416 #endif 417 418 #undef CONFIG_CLOCKS_IN_MHZ 419 420 /* 421 * Memory map 422 * 423 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 424 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 425 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 426 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 427 * (early boot only) 428 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 429 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 430 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 431 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 432 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 433 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 434 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 435 */ 436 437 438 /* 439 * Local Bus Definitions 440 */ 441 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 442 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 443 #define CONFIG_SYS_FLASH_BASE 0xec000000 444 #elif defined(CONFIG_P1020UTM) 445 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 446 #define CONFIG_SYS_FLASH_BASE 0xee000000 447 #else 448 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 449 #define CONFIG_SYS_FLASH_BASE 0xef000000 450 #endif 451 452 453 #ifdef CONFIG_PHYS_64BIT 454 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 455 #else 456 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 457 #endif 458 459 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 460 | BR_PS_16 | BR_V) 461 462 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 463 464 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 465 #define CONFIG_SYS_FLASH_QUIET_TEST 466 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 467 468 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 469 470 #undef CONFIG_SYS_FLASH_CHECKSUM 471 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 472 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 473 474 #define CONFIG_FLASH_CFI_DRIVER 475 #define CONFIG_SYS_FLASH_CFI 476 #define CONFIG_SYS_FLASH_EMPTY_INFO 477 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 478 479 /* Nand Flash */ 480 #ifdef CONFIG_NAND_FSL_ELBC 481 #define CONFIG_SYS_NAND_BASE 0xff800000 482 #ifdef CONFIG_PHYS_64BIT 483 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 484 #else 485 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 486 #endif 487 488 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 489 #define CONFIG_SYS_MAX_NAND_DEVICE 1 490 #define CONFIG_CMD_NAND 491 #if defined(CONFIG_P1020RDB_PD) 492 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 493 #else 494 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 495 #endif 496 497 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 498 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 499 | BR_PS_8 /* Port Size = 8 bit */ \ 500 | BR_MS_FCM /* MSEL = FCM */ \ 501 | BR_V) /* valid */ 502 #if defined(CONFIG_P1020RDB_PD) 503 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 504 | OR_FCM_PGS /* Large Page*/ \ 505 | OR_FCM_CSCT \ 506 | OR_FCM_CST \ 507 | OR_FCM_CHT \ 508 | OR_FCM_SCY_1 \ 509 | OR_FCM_TRLX \ 510 | OR_FCM_EHTR) 511 #else 512 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 513 | OR_FCM_CSCT \ 514 | OR_FCM_CST \ 515 | OR_FCM_CHT \ 516 | OR_FCM_SCY_1 \ 517 | OR_FCM_TRLX \ 518 | OR_FCM_EHTR) 519 #endif 520 #endif /* CONFIG_NAND_FSL_ELBC */ 521 522 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 523 524 #define CONFIG_SYS_INIT_RAM_LOCK 525 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 526 #ifdef CONFIG_PHYS_64BIT 527 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 528 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 529 /* The assembler doesn't like typecast */ 530 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 531 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 532 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 533 #else 534 /* Initial L1 address */ 535 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 536 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 537 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 538 #endif 539 /* Size of used area in RAM */ 540 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 541 542 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 543 GENERATED_GBL_DATA_SIZE) 544 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 545 546 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 547 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 548 549 #define CONFIG_SYS_CPLD_BASE 0xffa00000 550 #ifdef CONFIG_PHYS_64BIT 551 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 552 #else 553 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 554 #endif 555 /* CPLD config size: 1Mb */ 556 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 557 BR_PS_8 | BR_V) 558 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 559 560 #define CONFIG_SYS_PMC_BASE 0xff980000 561 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 562 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 563 BR_PS_8 | BR_V) 564 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 565 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 566 OR_GPCM_EAD) 567 568 #ifdef CONFIG_NAND 569 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 570 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 571 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 572 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 573 #else 574 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 575 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 576 #ifdef CONFIG_NAND_FSL_ELBC 577 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 578 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 579 #endif 580 #endif 581 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 582 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 583 584 585 /* Vsc7385 switch */ 586 #ifdef CONFIG_VSC7385_ENET 587 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 588 589 #ifdef CONFIG_PHYS_64BIT 590 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 591 #else 592 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 593 #endif 594 595 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 596 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 597 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 598 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 599 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 600 601 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 602 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 603 604 /* The size of the VSC7385 firmware image */ 605 #define CONFIG_VSC7385_IMAGE_SIZE 8192 606 #endif 607 608 /* 609 * Config the L2 Cache as L2 SRAM 610 */ 611 #if defined(CONFIG_SPL_BUILD) 612 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 613 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 614 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 615 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 616 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 617 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 618 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 619 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 620 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 621 #if defined(CONFIG_P2020RDB) 622 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 623 #else 624 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 625 #endif 626 #elif defined(CONFIG_NAND) 627 #ifdef CONFIG_TPL_BUILD 628 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 629 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 630 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 631 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 632 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 633 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 634 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 635 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 636 #else 637 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 638 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 639 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 640 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 641 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 642 #endif /* CONFIG_TPL_BUILD */ 643 #endif 644 #endif 645 646 /* Serial Port - controlled on board with jumper J8 647 * open - index 2 648 * shorted - index 1 649 */ 650 #define CONFIG_CONS_INDEX 1 651 #undef CONFIG_SERIAL_SOFTWARE_FIFO 652 #define CONFIG_SYS_NS16550_SERIAL 653 #define CONFIG_SYS_NS16550_REG_SIZE 1 654 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 655 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 656 #define CONFIG_NS16550_MIN_FUNCTIONS 657 #endif 658 659 #define CONFIG_SYS_BAUDRATE_TABLE \ 660 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 661 662 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 663 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 664 665 /* Use the HUSH parser */ 666 #define CONFIG_SYS_HUSH_PARSER 667 668 /* 669 * Pass open firmware flat tree 670 */ 671 #define CONFIG_OF_LIBFDT 672 #define CONFIG_OF_BOARD_SETUP 673 #define CONFIG_OF_STDOUT_VIA_ALIAS 674 675 /* new uImage format support */ 676 #define CONFIG_FIT 677 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 678 679 /* I2C */ 680 #define CONFIG_SYS_I2C 681 #define CONFIG_SYS_I2C_FSL 682 #define CONFIG_SYS_FSL_I2C_SPEED 400000 683 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 684 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 685 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 686 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 687 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 688 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 689 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 690 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 691 692 /* 693 * I2C2 EEPROM 694 */ 695 #undef CONFIG_ID_EEPROM 696 697 #define CONFIG_RTC_PT7C4338 698 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 699 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 700 701 /* enable read and write access to EEPROM */ 702 #define CONFIG_CMD_EEPROM 703 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 704 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 705 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 706 707 /* 708 * eSPI - Enhanced SPI 709 */ 710 #define CONFIG_HARD_SPI 711 712 #if defined(CONFIG_SPI_FLASH) 713 #define CONFIG_CMD_SF 714 #define CONFIG_SF_DEFAULT_SPEED 10000000 715 #define CONFIG_SF_DEFAULT_MODE 0 716 #endif 717 718 #if defined(CONFIG_PCI) 719 /* 720 * General PCI 721 * Memory space is mapped 1-1, but I/O space must start from 0. 722 */ 723 724 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 725 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 726 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 727 #ifdef CONFIG_PHYS_64BIT 728 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 729 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 730 #else 731 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 732 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 733 #endif 734 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 735 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 736 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 737 #ifdef CONFIG_PHYS_64BIT 738 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 739 #else 740 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 741 #endif 742 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 743 744 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 745 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 746 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 747 #ifdef CONFIG_PHYS_64BIT 748 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 749 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 750 #else 751 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 752 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 753 #endif 754 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 755 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 756 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 757 #ifdef CONFIG_PHYS_64BIT 758 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 759 #else 760 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 761 #endif 762 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 763 764 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 765 #define CONFIG_CMD_PCI 766 767 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 768 #define CONFIG_DOS_PARTITION 769 #endif /* CONFIG_PCI */ 770 771 #if defined(CONFIG_TSEC_ENET) 772 #define CONFIG_MII /* MII PHY management */ 773 #define CONFIG_TSEC1 774 #define CONFIG_TSEC1_NAME "eTSEC1" 775 #define CONFIG_TSEC2 776 #define CONFIG_TSEC2_NAME "eTSEC2" 777 #define CONFIG_TSEC3 778 #define CONFIG_TSEC3_NAME "eTSEC3" 779 780 #define TSEC1_PHY_ADDR 2 781 #define TSEC2_PHY_ADDR 0 782 #define TSEC3_PHY_ADDR 1 783 784 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 785 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 786 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 787 788 #define TSEC1_PHYIDX 0 789 #define TSEC2_PHYIDX 0 790 #define TSEC3_PHYIDX 0 791 792 #define CONFIG_ETHPRIME "eTSEC1" 793 794 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 795 796 #define CONFIG_HAS_ETH0 797 #define CONFIG_HAS_ETH1 798 #define CONFIG_HAS_ETH2 799 #endif /* CONFIG_TSEC_ENET */ 800 801 #ifdef CONFIG_QE 802 /* QE microcode/firmware address */ 803 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 804 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 805 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 806 #endif /* CONFIG_QE */ 807 808 #ifdef CONFIG_P1025RDB 809 /* 810 * QE UEC ethernet configuration 811 */ 812 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 813 814 #undef CONFIG_UEC_ETH 815 #define CONFIG_PHY_MODE_NEED_CHANGE 816 817 #define CONFIG_UEC_ETH1 /* ETH1 */ 818 #define CONFIG_HAS_ETH0 819 820 #ifdef CONFIG_UEC_ETH1 821 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 822 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 823 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 824 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 825 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 826 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 827 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 828 #endif /* CONFIG_UEC_ETH1 */ 829 830 #define CONFIG_UEC_ETH5 /* ETH5 */ 831 #define CONFIG_HAS_ETH1 832 833 #ifdef CONFIG_UEC_ETH5 834 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 835 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 836 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 837 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 838 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 839 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 840 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 841 #endif /* CONFIG_UEC_ETH5 */ 842 #endif /* CONFIG_P1025RDB */ 843 844 /* 845 * Environment 846 */ 847 #ifdef CONFIG_SPIFLASH 848 #define CONFIG_ENV_IS_IN_SPI_FLASH 849 #define CONFIG_ENV_SPI_BUS 0 850 #define CONFIG_ENV_SPI_CS 0 851 #define CONFIG_ENV_SPI_MAX_HZ 10000000 852 #define CONFIG_ENV_SPI_MODE 0 853 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 854 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 855 #define CONFIG_ENV_SECT_SIZE 0x10000 856 #elif defined(CONFIG_SDCARD) 857 #define CONFIG_ENV_IS_IN_MMC 858 #define CONFIG_FSL_FIXED_MMC_LOCATION 859 #define CONFIG_ENV_SIZE 0x2000 860 #define CONFIG_SYS_MMC_ENV_DEV 0 861 #elif defined(CONFIG_NAND) 862 #ifdef CONFIG_TPL_BUILD 863 #define CONFIG_ENV_SIZE 0x2000 864 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 865 #else 866 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 867 #endif 868 #define CONFIG_ENV_IS_IN_NAND 869 #define CONFIG_ENV_OFFSET (1024 * 1024) 870 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 871 #elif defined(CONFIG_SYS_RAMBOOT) 872 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 873 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 874 #define CONFIG_ENV_SIZE 0x2000 875 #else 876 #define CONFIG_ENV_IS_IN_FLASH 877 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 878 #define CONFIG_ENV_SIZE 0x2000 879 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 880 #endif 881 882 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 883 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 884 885 /* 886 * Command line configuration. 887 */ 888 #define CONFIG_CMD_IRQ 889 #define CONFIG_CMD_PING 890 #define CONFIG_CMD_I2C 891 #define CONFIG_CMD_MII 892 #define CONFIG_CMD_DATE 893 #define CONFIG_CMD_REGINFO 894 895 /* 896 * USB 897 */ 898 #define CONFIG_HAS_FSL_DR_USB 899 900 #if defined(CONFIG_HAS_FSL_DR_USB) 901 #define CONFIG_USB_EHCI 902 903 #ifdef CONFIG_USB_EHCI 904 #define CONFIG_CMD_USB 905 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 906 #define CONFIG_USB_EHCI_FSL 907 #define CONFIG_USB_STORAGE 908 #endif 909 #endif 910 911 #if defined(CONFIG_P1020RDB_PD) 912 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 913 #endif 914 915 #define CONFIG_MMC 916 917 #ifdef CONFIG_MMC 918 #define CONFIG_FSL_ESDHC 919 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 920 #define CONFIG_CMD_MMC 921 #define CONFIG_GENERIC_MMC 922 #endif 923 924 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 925 || defined(CONFIG_FSL_SATA) 926 #define CONFIG_CMD_EXT2 927 #define CONFIG_CMD_FAT 928 #define CONFIG_DOS_PARTITION 929 #endif 930 931 #undef CONFIG_WATCHDOG /* watchdog disabled */ 932 933 /* 934 * Miscellaneous configurable options 935 */ 936 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 937 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 938 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 939 #if defined(CONFIG_CMD_KGDB) 940 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 941 #else 942 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 943 #endif 944 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 945 /* Print Buffer Size */ 946 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 947 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 948 949 /* 950 * For booting Linux, the board info and command line data 951 * have to be in the first 64 MB of memory, since this is 952 * the maximum mapped by the Linux kernel during initialization. 953 */ 954 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 955 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 956 957 #if defined(CONFIG_CMD_KGDB) 958 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 959 #endif 960 961 /* 962 * Environment Configuration 963 */ 964 #define CONFIG_HOSTNAME unknown 965 #define CONFIG_ROOTPATH "/opt/nfsroot" 966 #define CONFIG_BOOTFILE "uImage" 967 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 968 969 /* default location for tftp and bootm */ 970 #define CONFIG_LOADADDR 1000000 971 972 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 973 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 974 975 #define CONFIG_BAUDRATE 115200 976 977 #ifdef __SW_BOOT_NOR 978 #define __NOR_RST_CMD \ 979 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 980 i2c mw 18 3 __SW_BOOT_MASK 1; reset 981 #endif 982 #ifdef __SW_BOOT_SPI 983 #define __SPI_RST_CMD \ 984 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 985 i2c mw 18 3 __SW_BOOT_MASK 1; reset 986 #endif 987 #ifdef __SW_BOOT_SD 988 #define __SD_RST_CMD \ 989 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 990 i2c mw 18 3 __SW_BOOT_MASK 1; reset 991 #endif 992 #ifdef __SW_BOOT_NAND 993 #define __NAND_RST_CMD \ 994 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 995 i2c mw 18 3 __SW_BOOT_MASK 1; reset 996 #endif 997 #ifdef __SW_BOOT_PCIE 998 #define __PCIE_RST_CMD \ 999 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 1000 i2c mw 18 3 __SW_BOOT_MASK 1; reset 1001 #endif 1002 1003 #define CONFIG_EXTRA_ENV_SETTINGS \ 1004 "netdev=eth0\0" \ 1005 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 1006 "loadaddr=1000000\0" \ 1007 "bootfile=uImage\0" \ 1008 "tftpflash=tftpboot $loadaddr $uboot; " \ 1009 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1010 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1011 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 1012 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1013 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 1014 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 1015 "consoledev=ttyS0\0" \ 1016 "ramdiskaddr=2000000\0" \ 1017 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 1018 "fdtaddr=c00000\0" \ 1019 "bdev=sda1\0" \ 1020 "jffs2nor=mtdblock3\0" \ 1021 "norbootaddr=ef080000\0" \ 1022 "norfdtaddr=ef040000\0" \ 1023 "jffs2nand=mtdblock9\0" \ 1024 "nandbootaddr=100000\0" \ 1025 "nandfdtaddr=80000\0" \ 1026 "ramdisk_size=120000\0" \ 1027 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 1028 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 1029 __stringify(__NOR_RST_CMD)"\0" \ 1030 __stringify(__SPI_RST_CMD)"\0" \ 1031 __stringify(__SD_RST_CMD)"\0" \ 1032 __stringify(__NAND_RST_CMD)"\0" \ 1033 __stringify(__PCIE_RST_CMD)"\0" 1034 1035 #define CONFIG_NFSBOOTCOMMAND \ 1036 "setenv bootargs root=/dev/nfs rw " \ 1037 "nfsroot=$serverip:$rootpath " \ 1038 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 1039 "console=$consoledev,$baudrate $othbootargs;" \ 1040 "tftp $loadaddr $bootfile;" \ 1041 "tftp $fdtaddr $fdtfile;" \ 1042 "bootm $loadaddr - $fdtaddr" 1043 1044 #define CONFIG_HDBOOT \ 1045 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 1046 "console=$consoledev,$baudrate $othbootargs;" \ 1047 "usb start;" \ 1048 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 1049 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 1050 "bootm $loadaddr - $fdtaddr" 1051 1052 #define CONFIG_USB_FAT_BOOT \ 1053 "setenv bootargs root=/dev/ram rw " \ 1054 "console=$consoledev,$baudrate $othbootargs " \ 1055 "ramdisk_size=$ramdisk_size;" \ 1056 "usb start;" \ 1057 "fatload usb 0:2 $loadaddr $bootfile;" \ 1058 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 1059 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 1060 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1061 1062 #define CONFIG_USB_EXT2_BOOT \ 1063 "setenv bootargs root=/dev/ram rw " \ 1064 "console=$consoledev,$baudrate $othbootargs " \ 1065 "ramdisk_size=$ramdisk_size;" \ 1066 "usb start;" \ 1067 "ext2load usb 0:4 $loadaddr $bootfile;" \ 1068 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 1069 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 1070 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1071 1072 #define CONFIG_NORBOOT \ 1073 "setenv bootargs root=/dev/$jffs2nor rw " \ 1074 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 1075 "bootm $norbootaddr - $norfdtaddr" 1076 1077 #define CONFIG_RAMBOOTCOMMAND \ 1078 "setenv bootargs root=/dev/ram rw " \ 1079 "console=$consoledev,$baudrate $othbootargs " \ 1080 "ramdisk_size=$ramdisk_size;" \ 1081 "tftp $ramdiskaddr $ramdiskfile;" \ 1082 "tftp $loadaddr $bootfile;" \ 1083 "tftp $fdtaddr $fdtfile;" \ 1084 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1085 1086 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 1087 1088 #endif /* __CONFIG_H */ 1089