1 /*
2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 /*
8  * QorIQ RDB boards configuration file
9  */
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #if defined(CONFIG_TARGET_P1020MBG)
14 #define CONFIG_BOARDNAME "P1020MBG-PC"
15 #define CONFIG_VSC7385_ENET
16 #define CONFIG_SLIC
17 #define __SW_BOOT_MASK		0x03
18 #define __SW_BOOT_NOR		0xe4
19 #define __SW_BOOT_SD		0x54
20 #define CONFIG_SYS_L2_SIZE	(256 << 10)
21 #endif
22 
23 #if defined(CONFIG_TARGET_P1020UTM)
24 #define CONFIG_BOARDNAME "P1020UTM-PC"
25 #define __SW_BOOT_MASK		0x03
26 #define __SW_BOOT_NOR		0xe0
27 #define __SW_BOOT_SD		0x50
28 #define CONFIG_SYS_L2_SIZE	(256 << 10)
29 #endif
30 
31 #if defined(CONFIG_TARGET_P1020RDB_PC)
32 #define CONFIG_BOARDNAME "P1020RDB-PC"
33 #define CONFIG_NAND_FSL_ELBC
34 #define CONFIG_VSC7385_ENET
35 #define CONFIG_SLIC
36 #define __SW_BOOT_MASK		0x03
37 #define __SW_BOOT_NOR		0x5c
38 #define __SW_BOOT_SPI		0x1c
39 #define __SW_BOOT_SD		0x9c
40 #define __SW_BOOT_NAND		0xec
41 #define __SW_BOOT_PCIE		0x6c
42 #define CONFIG_SYS_L2_SIZE	(256 << 10)
43 #endif
44 
45 /*
46  * P1020RDB-PD board has user selectable switches for evaluating different
47  * frequency and boot options for the P1020 device. The table that
48  * follow describe the available options. The front six binary number was in
49  * accordance with SW3[1:6].
50  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
51  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
52  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
53  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
54  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
55  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
56  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
57  */
58 #if defined(CONFIG_TARGET_P1020RDB_PD)
59 #define CONFIG_BOARDNAME "P1020RDB-PD"
60 #define CONFIG_NAND_FSL_ELBC
61 #define CONFIG_VSC7385_ENET
62 #define CONFIG_SLIC
63 #define __SW_BOOT_MASK		0x03
64 #define __SW_BOOT_NOR		0x64
65 #define __SW_BOOT_SPI		0x34
66 #define __SW_BOOT_SD		0x24
67 #define __SW_BOOT_NAND		0x44
68 #define __SW_BOOT_PCIE		0x74
69 #define CONFIG_SYS_L2_SIZE	(256 << 10)
70 /*
71  * Dynamic MTD Partition support with mtdparts
72  */
73 #define CONFIG_MTD_DEVICE
74 #define CONFIG_MTD_PARTITIONS
75 #define CONFIG_CMD_MTDPARTS
76 #define CONFIG_FLASH_CFI_MTD
77 #define MTDIDS_DEFAULT "nor0=ec000000.nor"
78 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
79 			"57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
80 #endif
81 
82 #if defined(CONFIG_TARGET_P1021RDB)
83 #define CONFIG_BOARDNAME "P1021RDB-PC"
84 #define CONFIG_NAND_FSL_ELBC
85 #define CONFIG_QE
86 #define CONFIG_VSC7385_ENET
87 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
88 						addresses in the LBC */
89 #define __SW_BOOT_MASK		0x03
90 #define __SW_BOOT_NOR		0x5c
91 #define __SW_BOOT_SPI		0x1c
92 #define __SW_BOOT_SD		0x9c
93 #define __SW_BOOT_NAND		0xec
94 #define __SW_BOOT_PCIE		0x6c
95 #define CONFIG_SYS_L2_SIZE	(256 << 10)
96 /*
97  * Dynamic MTD Partition support with mtdparts
98  */
99 #define CONFIG_MTD_DEVICE
100 #define CONFIG_MTD_PARTITIONS
101 #define CONFIG_CMD_MTDPARTS
102 #define CONFIG_FLASH_CFI_MTD
103 #ifdef CONFIG_PHYS_64BIT
104 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
105 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
106 			"256k(dtb),4608k(kernel),9728k(fs)," \
107 			"256k(qe-ucode-firmware),1280k(u-boot)"
108 #else
109 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
110 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
111 			"256k(dtb),4608k(kernel),9728k(fs)," \
112 			"256k(qe-ucode-firmware),1280k(u-boot)"
113 #endif
114 #endif
115 
116 #if defined(CONFIG_TARGET_P1024RDB)
117 #define CONFIG_BOARDNAME "P1024RDB"
118 #define CONFIG_NAND_FSL_ELBC
119 #define CONFIG_SLIC
120 #define __SW_BOOT_MASK		0xf3
121 #define __SW_BOOT_NOR		0x00
122 #define __SW_BOOT_SPI		0x08
123 #define __SW_BOOT_SD		0x04
124 #define __SW_BOOT_NAND		0x0c
125 #define CONFIG_SYS_L2_SIZE	(256 << 10)
126 #endif
127 
128 #if defined(CONFIG_TARGET_P1025RDB)
129 #define CONFIG_BOARDNAME "P1025RDB"
130 #define CONFIG_NAND_FSL_ELBC
131 #define CONFIG_QE
132 #define CONFIG_SLIC
133 
134 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
135 						addresses in the LBC */
136 #define __SW_BOOT_MASK		0xf3
137 #define __SW_BOOT_NOR		0x00
138 #define __SW_BOOT_SPI		0x08
139 #define __SW_BOOT_SD		0x04
140 #define __SW_BOOT_NAND		0x0c
141 #define CONFIG_SYS_L2_SIZE	(256 << 10)
142 #endif
143 
144 #if defined(CONFIG_TARGET_P2020RDB)
145 #define CONFIG_BOARDNAME "P2020RDB-PC"
146 #define CONFIG_NAND_FSL_ELBC
147 #define CONFIG_VSC7385_ENET
148 #define __SW_BOOT_MASK		0x03
149 #define __SW_BOOT_NOR		0xc8
150 #define __SW_BOOT_SPI		0x28
151 #define __SW_BOOT_SD		0x68 /* or 0x18 */
152 #define __SW_BOOT_NAND		0xe8
153 #define __SW_BOOT_PCIE		0xa8
154 #define CONFIG_SYS_L2_SIZE	(512 << 10)
155 /*
156  * Dynamic MTD Partition support with mtdparts
157  */
158 #define CONFIG_MTD_DEVICE
159 #define CONFIG_MTD_PARTITIONS
160 #define CONFIG_CMD_MTDPARTS
161 #define CONFIG_FLASH_CFI_MTD
162 #ifdef CONFIG_PHYS_64BIT
163 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
164 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
165 			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
166 #else
167 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
168 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
169 			"256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
170 #endif
171 #endif
172 
173 #ifdef CONFIG_SDCARD
174 #define CONFIG_SPL_MMC_MINIMAL
175 #define CONFIG_SPL_FLUSH_IMAGE
176 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
177 #define CONFIG_SYS_TEXT_BASE		0x11001000
178 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
179 #define CONFIG_SPL_PAD_TO		0x20000
180 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
181 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
182 #define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
183 #define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
184 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
185 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
186 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
187 #define CONFIG_SPL_MMC_BOOT
188 #ifdef CONFIG_SPL_BUILD
189 #define CONFIG_SPL_COMMON_INIT_DDR
190 #endif
191 #endif
192 
193 #ifdef CONFIG_SPIFLASH
194 #define CONFIG_SPL_SPI_FLASH_MINIMAL
195 #define CONFIG_SPL_FLUSH_IMAGE
196 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
197 #define CONFIG_SYS_TEXT_BASE		0x11001000
198 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
199 #define CONFIG_SPL_PAD_TO		0x20000
200 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
201 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
202 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
203 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
204 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
205 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
206 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
207 #define CONFIG_SPL_SPI_BOOT
208 #ifdef CONFIG_SPL_BUILD
209 #define CONFIG_SPL_COMMON_INIT_DDR
210 #endif
211 #endif
212 
213 #ifdef CONFIG_NAND
214 #ifdef CONFIG_TPL_BUILD
215 #define CONFIG_SPL_NAND_BOOT
216 #define CONFIG_SPL_FLUSH_IMAGE
217 #define CONFIG_SPL_NAND_INIT
218 #define CONFIG_SPL_COMMON_INIT_DDR
219 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
220 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
221 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
222 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(832 << 10)
223 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
224 #define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
225 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
226 #elif defined(CONFIG_SPL_BUILD)
227 #define CONFIG_SPL_INIT_MINIMAL
228 #define CONFIG_SPL_FLUSH_IMAGE
229 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
230 #define CONFIG_SPL_TEXT_BASE		0xff800000
231 #define CONFIG_SPL_MAX_SIZE		4096
232 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
233 #define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
234 #define CONFIG_SYS_NAND_U_BOOT_START	0xf8f80000
235 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
236 #endif /* not CONFIG_TPL_BUILD */
237 
238 #define CONFIG_SPL_PAD_TO		0x20000
239 #define CONFIG_TPL_PAD_TO		0x20000
240 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
241 #define CONFIG_SYS_TEXT_BASE		0x11001000
242 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
243 #endif
244 
245 #ifndef CONFIG_SYS_TEXT_BASE
246 #define CONFIG_SYS_TEXT_BASE		0xeff40000
247 #endif
248 
249 #ifndef CONFIG_RESET_VECTOR_ADDRESS
250 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
251 #endif
252 
253 #ifndef CONFIG_SYS_MONITOR_BASE
254 #ifdef CONFIG_SPL_BUILD
255 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
256 #else
257 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
258 #endif
259 #endif
260 
261 #define CONFIG_MP
262 
263 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
264 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
265 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
266 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
267 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
268 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
269 
270 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
271 #define CONFIG_ENV_OVERWRITE
272 
273 #define CONFIG_CMD_SATA
274 #define CONFIG_SATA_SIL
275 #define CONFIG_SYS_SATA_MAX_DEVICE	2
276 #define CONFIG_LIBATA
277 #define CONFIG_LBA48
278 
279 #if defined(CONFIG_TARGET_P2020RDB)
280 #define CONFIG_SYS_CLK_FREQ	100000000
281 #else
282 #define CONFIG_SYS_CLK_FREQ	66666666
283 #endif
284 #define CONFIG_DDR_CLK_FREQ	66666666
285 
286 #define CONFIG_HWCONFIG
287 /*
288  * These can be toggled for performance analysis, otherwise use default.
289  */
290 #define CONFIG_L2_CACHE
291 #define CONFIG_BTB
292 
293 #define CONFIG_ENABLE_36BIT_PHYS
294 
295 #ifdef CONFIG_PHYS_64BIT
296 #define CONFIG_ADDR_MAP			1
297 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
298 #endif
299 
300 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
301 #define CONFIG_SYS_MEMTEST_END		0x1fffffff
302 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
303 
304 #define CONFIG_SYS_CCSRBAR		0xffe00000
305 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
306 
307 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
308        SPL code*/
309 #ifdef CONFIG_SPL_BUILD
310 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
311 #endif
312 
313 /* DDR Setup */
314 #define CONFIG_SYS_DDR_RAW_TIMING
315 #define CONFIG_DDR_SPD
316 #define CONFIG_SYS_SPD_BUS_NUM 1
317 #define SPD_EEPROM_ADDRESS 0x52
318 #undef CONFIG_FSL_DDR_INTERACTIVE
319 
320 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
321 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_2G
322 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
323 #else
324 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_1G
325 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
326 #endif
327 #define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
328 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
329 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
330 
331 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
332 
333 /* Default settings for DDR3 */
334 #ifndef CONFIG_TARGET_P2020RDB
335 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
336 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
337 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
338 #define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
339 #define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
340 #define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
341 
342 #define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
343 #define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
344 #define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
345 #define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
346 
347 #define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
348 #define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
349 #define CONFIG_SYS_DDR_SR_CNTR		0x00000000
350 #define CONFIG_SYS_DDR_RCW_1		0x00000000
351 #define CONFIG_SYS_DDR_RCW_2		0x00000000
352 #define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3	*/
353 #define CONFIG_SYS_DDR_CONTROL_2	0x04401050
354 #define CONFIG_SYS_DDR_TIMING_4		0x00220001
355 #define CONFIG_SYS_DDR_TIMING_5		0x03402400
356 
357 #define CONFIG_SYS_DDR_TIMING_3		0x00020000
358 #define CONFIG_SYS_DDR_TIMING_0		0x00330004
359 #define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
360 #define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
361 #define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
362 #define CONFIG_SYS_DDR_MODE_1		0x40461520
363 #define CONFIG_SYS_DDR_MODE_2		0x8000c000
364 #define CONFIG_SYS_DDR_INTERVAL		0x0C300000
365 #endif
366 
367 #undef CONFIG_CLOCKS_IN_MHZ
368 
369 /*
370  * Memory map
371  *
372  * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
373  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
374  * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
375  * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
376  *   (early boot only)
377  * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
378  * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
379  * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
380  * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
381  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
382  * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
383  * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
384  */
385 
386 /*
387  * Local Bus Definitions
388  */
389 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
390 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
391 #define CONFIG_SYS_FLASH_BASE		0xec000000
392 #elif defined(CONFIG_TARGET_P1020UTM)
393 #define CONFIG_SYS_MAX_FLASH_SECT	256	/* 32M */
394 #define CONFIG_SYS_FLASH_BASE		0xee000000
395 #else
396 #define CONFIG_SYS_MAX_FLASH_SECT	128	/* 16M */
397 #define CONFIG_SYS_FLASH_BASE		0xef000000
398 #endif
399 
400 #ifdef CONFIG_PHYS_64BIT
401 #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
402 #else
403 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
404 #endif
405 
406 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
407 	| BR_PS_16 | BR_V)
408 
409 #define CONFIG_FLASH_OR_PRELIM	0xfc000ff7
410 
411 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
412 #define CONFIG_SYS_FLASH_QUIET_TEST
413 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
414 
415 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
416 
417 #undef CONFIG_SYS_FLASH_CHECKSUM
418 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
419 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
420 
421 #define CONFIG_FLASH_CFI_DRIVER
422 #define CONFIG_SYS_FLASH_CFI
423 #define CONFIG_SYS_FLASH_EMPTY_INFO
424 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
425 
426 /* Nand Flash */
427 #ifdef CONFIG_NAND_FSL_ELBC
428 #define CONFIG_SYS_NAND_BASE		0xff800000
429 #ifdef CONFIG_PHYS_64BIT
430 #define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
431 #else
432 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
433 #endif
434 
435 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
436 #define CONFIG_SYS_MAX_NAND_DEVICE	1
437 #define CONFIG_CMD_NAND
438 #if defined(CONFIG_TARGET_P1020RDB_PD)
439 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
440 #else
441 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
442 #endif
443 
444 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
445 	| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
446 	| BR_PS_8	/* Port Size = 8 bit */ \
447 	| BR_MS_FCM	/* MSEL = FCM */ \
448 	| BR_V)	/* valid */
449 #if defined(CONFIG_TARGET_P1020RDB_PD)
450 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB \
451 	| OR_FCM_PGS	/* Large Page*/ \
452 	| OR_FCM_CSCT \
453 	| OR_FCM_CST \
454 	| OR_FCM_CHT \
455 	| OR_FCM_SCY_1 \
456 	| OR_FCM_TRLX \
457 	| OR_FCM_EHTR)
458 #else
459 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB	/* small page */ \
460 	| OR_FCM_CSCT \
461 	| OR_FCM_CST \
462 	| OR_FCM_CHT \
463 	| OR_FCM_SCY_1 \
464 	| OR_FCM_TRLX \
465 	| OR_FCM_EHTR)
466 #endif
467 #endif /* CONFIG_NAND_FSL_ELBC */
468 
469 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
470 
471 #define CONFIG_SYS_INIT_RAM_LOCK
472 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
473 #ifdef CONFIG_PHYS_64BIT
474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
476 /* The assembler doesn't like typecast */
477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
478 	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
479 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
480 #else
481 /* Initial L1 address */
482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
485 #endif
486 /* Size of used area in RAM */
487 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
488 
489 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
490 					GENERATED_GBL_DATA_SIZE)
491 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
492 
493 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
494 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)/* Reserved for malloc */
495 
496 #define CONFIG_SYS_CPLD_BASE	0xffa00000
497 #ifdef CONFIG_PHYS_64BIT
498 #define CONFIG_SYS_CPLD_BASE_PHYS	0xfffa00000ull
499 #else
500 #define CONFIG_SYS_CPLD_BASE_PHYS	CONFIG_SYS_CPLD_BASE
501 #endif
502 /* CPLD config size: 1Mb */
503 #define CONFIG_CPLD_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
504 					BR_PS_8 | BR_V)
505 #define CONFIG_CPLD_OR_PRELIM	(0xfff009f7)
506 
507 #define CONFIG_SYS_PMC_BASE	0xff980000
508 #define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
509 #define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
510 					BR_PS_8 | BR_V)
511 #define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
512 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
513 				 OR_GPCM_EAD)
514 
515 #ifdef CONFIG_NAND
516 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
517 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
518 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
519 #define CONFIG_SYS_OR1_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
520 #else
521 #define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
522 #define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
523 #ifdef CONFIG_NAND_FSL_ELBC
524 #define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
525 #define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
526 #endif
527 #endif
528 #define CONFIG_SYS_BR3_PRELIM	CONFIG_CPLD_BR_PRELIM	/* CPLD Base Address */
529 #define CONFIG_SYS_OR3_PRELIM	CONFIG_CPLD_OR_PRELIM	/* CPLD Options */
530 
531 /* Vsc7385 switch */
532 #ifdef CONFIG_VSC7385_ENET
533 #define CONFIG_SYS_VSC7385_BASE		0xffb00000
534 
535 #ifdef CONFIG_PHYS_64BIT
536 #define CONFIG_SYS_VSC7385_BASE_PHYS	0xfffb00000ull
537 #else
538 #define CONFIG_SYS_VSC7385_BASE_PHYS	CONFIG_SYS_VSC7385_BASE
539 #endif
540 
541 #define CONFIG_SYS_VSC7385_BR_PRELIM	\
542 	(BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
543 #define CONFIG_SYS_VSC7385_OR_PRELIM	(OR_AM_128KB | OR_GPCM_CSNT | \
544 			OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
545 			OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
546 
547 #define CONFIG_SYS_BR2_PRELIM	CONFIG_SYS_VSC7385_BR_PRELIM
548 #define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_VSC7385_OR_PRELIM
549 
550 /* The size of the VSC7385 firmware image */
551 #define CONFIG_VSC7385_IMAGE_SIZE	8192
552 #endif
553 
554 /*
555  * Config the L2 Cache as L2 SRAM
556 */
557 #if defined(CONFIG_SPL_BUILD)
558 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
559 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
560 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
561 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
562 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
563 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
564 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
565 #define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
566 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
567 #if defined(CONFIG_TARGET_P2020RDB)
568 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(364 << 10)
569 #else
570 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(108 << 10)
571 #endif
572 #elif defined(CONFIG_NAND)
573 #ifdef CONFIG_TPL_BUILD
574 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
575 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
576 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
577 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
578 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
579 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
580 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
581 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
582 #else
583 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
584 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
585 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
586 #define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x2000)
587 #define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
588 #endif /* CONFIG_TPL_BUILD */
589 #endif
590 #endif
591 
592 /* Serial Port - controlled on board with jumper J8
593  * open - index 2
594  * shorted - index 1
595  */
596 #define CONFIG_CONS_INDEX		1
597 #undef CONFIG_SERIAL_SOFTWARE_FIFO
598 #define CONFIG_SYS_NS16550_SERIAL
599 #define CONFIG_SYS_NS16550_REG_SIZE	1
600 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
601 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
602 #define CONFIG_NS16550_MIN_FUNCTIONS
603 #endif
604 
605 #define CONFIG_SYS_BAUDRATE_TABLE	\
606 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
607 
608 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
609 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
610 
611 /* I2C */
612 #define CONFIG_SYS_I2C
613 #define CONFIG_SYS_I2C_FSL
614 #define CONFIG_SYS_FSL_I2C_SPEED	400000
615 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
616 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
617 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
618 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
619 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
620 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
621 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
622 #define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
623 
624 /*
625  * I2C2 EEPROM
626  */
627 #undef CONFIG_ID_EEPROM
628 
629 #define CONFIG_RTC_PT7C4338
630 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
631 #define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
632 
633 /* enable read and write access to EEPROM */
634 #define CONFIG_CMD_EEPROM
635 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
636 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
637 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
638 
639 /*
640  * eSPI - Enhanced SPI
641  */
642 #define CONFIG_HARD_SPI
643 
644 #if defined(CONFIG_SPI_FLASH)
645 #define CONFIG_SF_DEFAULT_SPEED	10000000
646 #define CONFIG_SF_DEFAULT_MODE	0
647 #endif
648 
649 #if defined(CONFIG_PCI)
650 /*
651  * General PCI
652  * Memory space is mapped 1-1, but I/O space must start from 0.
653  */
654 
655 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
656 #define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT"
657 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
658 #ifdef CONFIG_PHYS_64BIT
659 #define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
660 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
661 #else
662 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
663 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
664 #endif
665 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
666 #define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
667 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
668 #ifdef CONFIG_PHYS_64BIT
669 #define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
670 #else
671 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
672 #endif
673 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
674 
675 /* controller 1, Slot 2, tgtid 1, Base address a000 */
676 #define CONFIG_SYS_PCIE1_NAME		"mini PCIe SLOT"
677 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
678 #ifdef CONFIG_PHYS_64BIT
679 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
680 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
681 #else
682 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
683 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
684 #endif
685 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
686 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
687 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
688 #ifdef CONFIG_PHYS_64BIT
689 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
690 #else
691 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
692 #endif
693 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
694 
695 #define CONFIG_CMD_PCI
696 
697 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
698 #endif /* CONFIG_PCI */
699 
700 #if defined(CONFIG_TSEC_ENET)
701 #define CONFIG_MII		/* MII PHY management */
702 #define CONFIG_TSEC1
703 #define CONFIG_TSEC1_NAME	"eTSEC1"
704 #define CONFIG_TSEC2
705 #define CONFIG_TSEC2_NAME	"eTSEC2"
706 #define CONFIG_TSEC3
707 #define CONFIG_TSEC3_NAME	"eTSEC3"
708 
709 #define TSEC1_PHY_ADDR	2
710 #define TSEC2_PHY_ADDR	0
711 #define TSEC3_PHY_ADDR	1
712 
713 #define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
714 #define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
715 #define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
716 
717 #define TSEC1_PHYIDX	0
718 #define TSEC2_PHYIDX	0
719 #define TSEC3_PHYIDX	0
720 
721 #define CONFIG_ETHPRIME	"eTSEC1"
722 
723 #define CONFIG_PHY_GIGE	1	/* Include GbE speed/duplex detection */
724 
725 #define CONFIG_HAS_ETH0
726 #define CONFIG_HAS_ETH1
727 #define CONFIG_HAS_ETH2
728 #endif /* CONFIG_TSEC_ENET */
729 
730 #ifdef CONFIG_QE
731 /* QE microcode/firmware address */
732 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
733 #define CONFIG_SYS_QE_FW_ADDR	0xefec0000
734 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
735 #endif /* CONFIG_QE */
736 
737 #ifdef CONFIG_TARGET_P1025RDB
738 /*
739  * QE UEC ethernet configuration
740  */
741 #define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
742 
743 #undef CONFIG_UEC_ETH
744 #define CONFIG_PHY_MODE_NEED_CHANGE
745 
746 #define CONFIG_UEC_ETH1	/* ETH1 */
747 #define CONFIG_HAS_ETH0
748 
749 #ifdef CONFIG_UEC_ETH1
750 #define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
751 #define CONFIG_SYS_UEC1_RX_CLK	QE_CLK12 /* CLK12 for MII */
752 #define CONFIG_SYS_UEC1_TX_CLK	QE_CLK9 /* CLK9 for MII */
753 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
754 #define CONFIG_SYS_UEC1_PHY_ADDR	0x0	/* 0x0 for MII */
755 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
756 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
757 #endif /* CONFIG_UEC_ETH1 */
758 
759 #define CONFIG_UEC_ETH5	/* ETH5 */
760 #define CONFIG_HAS_ETH1
761 
762 #ifdef CONFIG_UEC_ETH5
763 #define CONFIG_SYS_UEC5_UCC_NUM	4	/* UCC5 */
764 #define CONFIG_SYS_UEC5_RX_CLK	QE_CLK_NONE
765 #define CONFIG_SYS_UEC5_TX_CLK	QE_CLK13 /* CLK 13 for RMII */
766 #define CONFIG_SYS_UEC5_ETH_TYPE	FAST_ETH
767 #define CONFIG_SYS_UEC5_PHY_ADDR	0x3	/* 0x3 for RMII */
768 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
769 #define CONFIG_SYS_UEC5_INTERFACE_SPEED	100
770 #endif /* CONFIG_UEC_ETH5 */
771 #endif /* CONFIG_TARGET_P1025RDB */
772 
773 /*
774  * Environment
775  */
776 #ifdef CONFIG_SPIFLASH
777 #define CONFIG_ENV_IS_IN_SPI_FLASH
778 #define CONFIG_ENV_SPI_BUS	0
779 #define CONFIG_ENV_SPI_CS	0
780 #define CONFIG_ENV_SPI_MAX_HZ	10000000
781 #define CONFIG_ENV_SPI_MODE	0
782 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
783 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
784 #define CONFIG_ENV_SECT_SIZE	0x10000
785 #elif defined(CONFIG_SDCARD)
786 #define CONFIG_ENV_IS_IN_MMC
787 #define CONFIG_FSL_FIXED_MMC_LOCATION
788 #define CONFIG_ENV_SIZE		0x2000
789 #define CONFIG_SYS_MMC_ENV_DEV	0
790 #elif defined(CONFIG_NAND)
791 #ifdef CONFIG_TPL_BUILD
792 #define CONFIG_ENV_SIZE		0x2000
793 #define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
794 #else
795 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
796 #endif
797 #define CONFIG_ENV_IS_IN_NAND
798 #define CONFIG_ENV_OFFSET	(1024 * 1024)
799 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
800 #elif defined(CONFIG_SYS_RAMBOOT)
801 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
802 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
803 #define CONFIG_ENV_SIZE		0x2000
804 #else
805 #define CONFIG_ENV_IS_IN_FLASH
806 #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
807 #define CONFIG_ENV_SIZE		0x2000
808 #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
809 #endif
810 
811 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
812 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
813 
814 /*
815  * Command line configuration.
816  */
817 #define CONFIG_CMD_IRQ
818 #define CONFIG_CMD_REGINFO
819 
820 /*
821  * USB
822  */
823 #define CONFIG_HAS_FSL_DR_USB
824 
825 #if defined(CONFIG_HAS_FSL_DR_USB)
826 #define CONFIG_USB_EHCI
827 
828 #ifdef CONFIG_USB_EHCI
829 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
830 #define CONFIG_USB_EHCI_FSL
831 #endif
832 #endif
833 
834 #if defined(CONFIG_TARGET_P1020RDB_PD)
835 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
836 #endif
837 
838 #ifdef CONFIG_MMC
839 #define CONFIG_FSL_ESDHC
840 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
841 #endif
842 
843 #undef CONFIG_WATCHDOG	/* watchdog disabled */
844 
845 /*
846  * Miscellaneous configurable options
847  */
848 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
849 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
850 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
851 #if defined(CONFIG_CMD_KGDB)
852 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
853 #else
854 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
855 #endif
856 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
857 	/* Print Buffer Size */
858 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
859 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
860 
861 /*
862  * For booting Linux, the board info and command line data
863  * have to be in the first 64 MB of memory, since this is
864  * the maximum mapped by the Linux kernel during initialization.
865  */
866 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
867 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
868 
869 #if defined(CONFIG_CMD_KGDB)
870 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
871 #endif
872 
873 /*
874  * Environment Configuration
875  */
876 #define CONFIG_HOSTNAME		unknown
877 #define CONFIG_ROOTPATH		"/opt/nfsroot"
878 #define CONFIG_BOOTFILE		"uImage"
879 #define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
880 
881 /* default location for tftp and bootm */
882 #define CONFIG_LOADADDR	1000000
883 
884 #define CONFIG_BOOTARGS	/* the boot command will set bootargs */
885 
886 #ifdef __SW_BOOT_NOR
887 #define __NOR_RST_CMD	\
888 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
889 i2c mw 18 3 __SW_BOOT_MASK 1; reset
890 #endif
891 #ifdef __SW_BOOT_SPI
892 #define __SPI_RST_CMD	\
893 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
894 i2c mw 18 3 __SW_BOOT_MASK 1; reset
895 #endif
896 #ifdef __SW_BOOT_SD
897 #define __SD_RST_CMD	\
898 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
899 i2c mw 18 3 __SW_BOOT_MASK 1; reset
900 #endif
901 #ifdef __SW_BOOT_NAND
902 #define __NAND_RST_CMD	\
903 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
904 i2c mw 18 3 __SW_BOOT_MASK 1; reset
905 #endif
906 #ifdef __SW_BOOT_PCIE
907 #define __PCIE_RST_CMD	\
908 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
909 i2c mw 18 3 __SW_BOOT_MASK 1; reset
910 #endif
911 
912 #define	CONFIG_EXTRA_ENV_SETTINGS	\
913 "netdev=eth0\0"	\
914 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"	\
915 "loadaddr=1000000\0"	\
916 "bootfile=uImage\0"	\
917 "tftpflash=tftpboot $loadaddr $uboot; "	\
918 	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
919 	"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
920 	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
921 	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
922 	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
923 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
924 "consoledev=ttyS0\0"	\
925 "ramdiskaddr=2000000\0"	\
926 "ramdiskfile=rootfs.ext2.gz.uboot\0"	\
927 "fdtaddr=1e00000\0"	\
928 "bdev=sda1\0" \
929 "jffs2nor=mtdblock3\0"	\
930 "norbootaddr=ef080000\0"	\
931 "norfdtaddr=ef040000\0"	\
932 "jffs2nand=mtdblock9\0"	\
933 "nandbootaddr=100000\0"	\
934 "nandfdtaddr=80000\0"		\
935 "ramdisk_size=120000\0"	\
936 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
937 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
938 __stringify(__NOR_RST_CMD)"\0" \
939 __stringify(__SPI_RST_CMD)"\0" \
940 __stringify(__SD_RST_CMD)"\0" \
941 __stringify(__NAND_RST_CMD)"\0" \
942 __stringify(__PCIE_RST_CMD)"\0"
943 
944 #define CONFIG_NFSBOOTCOMMAND	\
945 "setenv bootargs root=/dev/nfs rw "	\
946 "nfsroot=$serverip:$rootpath "	\
947 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
948 "console=$consoledev,$baudrate $othbootargs;" \
949 "tftp $loadaddr $bootfile;"	\
950 "tftp $fdtaddr $fdtfile;"	\
951 "bootm $loadaddr - $fdtaddr"
952 
953 #define CONFIG_HDBOOT	\
954 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "	\
955 "console=$consoledev,$baudrate $othbootargs;" \
956 "usb start;"	\
957 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"	\
958 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"	\
959 "bootm $loadaddr - $fdtaddr"
960 
961 #define CONFIG_USB_FAT_BOOT	\
962 "setenv bootargs root=/dev/ram rw "	\
963 "console=$consoledev,$baudrate $othbootargs " \
964 "ramdisk_size=$ramdisk_size;"	\
965 "usb start;"	\
966 "fatload usb 0:2 $loadaddr $bootfile;"	\
967 "fatload usb 0:2 $fdtaddr $fdtfile;"	\
968 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"	\
969 "bootm $loadaddr $ramdiskaddr $fdtaddr"
970 
971 #define CONFIG_USB_EXT2_BOOT	\
972 "setenv bootargs root=/dev/ram rw "	\
973 "console=$consoledev,$baudrate $othbootargs " \
974 "ramdisk_size=$ramdisk_size;"	\
975 "usb start;"	\
976 "ext2load usb 0:4 $loadaddr $bootfile;"	\
977 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
978 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
979 "bootm $loadaddr $ramdiskaddr $fdtaddr"
980 
981 #define CONFIG_NORBOOT	\
982 "setenv bootargs root=/dev/$jffs2nor rw "	\
983 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
984 "bootm $norbootaddr - $norfdtaddr"
985 
986 #define CONFIG_RAMBOOTCOMMAND	\
987 "setenv bootargs root=/dev/ram rw "	\
988 "console=$consoledev,$baudrate $othbootargs " \
989 "ramdisk_size=$ramdisk_size;"	\
990 "tftp $ramdiskaddr $ramdiskfile;"	\
991 "tftp $loadaddr $bootfile;"	\
992 "tftp $fdtaddr $fdtfile;"	\
993 "bootm $loadaddr $ramdiskaddr $fdtaddr"
994 
995 #define CONFIG_BOOTCOMMAND	CONFIG_HDBOOT
996 
997 #endif /* __CONFIG_H */
998